Materials:Elevate Una-Clad UC Metal Roof Panel Systems

Jump to: navigation, search

Materials:Elevate Una-Clad UC Metal Roof Panel Systems

Revision as of 17:23, 30 May 2024 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Division C - Accepted Materials


Elevate Una-Clad UC Metal Roof Panel Systems

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Elevate Commercial Roofing Systems
Accepted for the RoofStar Guarantee Program
January 2008
Accepted for application in
Water-shedding Roof Systems
Product Summary
Elevate Una-Clad UC Metal Roof Panel Systems are available in a variety of profiles and seam types:
Una-Clad UC-3 (Snap-on batten, architectural standing seam roofing system, roll formed panels. Available in steel or copper.)
Una-Clad UC-4 (No-clip snap-lock standing seam roofing system, roll formed panels. Available in steel or copper.)
Una-Clad UC-6 (Double-lock with concealed clip assembly standing seam roofing system, roll formed roofing panels. Available in steel or copper)
Conditions and Limitations
Min. 24-Gauge metal (see Standard for Architectural Sheet Metal (ASM) Roof Systems)
Click below for the Technical Data Sheet.
Elevate Una-Clad UC-3 - Technical Data Sheet
Una-Clad UC-3 TDS
Elevate Una-Clad UC-4 - Technical Data Sheet

Una-Clad UC-4 TDS

Elevate Una-Clad UC-6 - Technical Data Sheet
Una-Clad UC-6 TDS