ASM Membrane Gutter (Insulated Assembly)

1 WORK INCLUDED

(1) Built-in Gutter Membrane

For construction details see also E1.7.17 Built-in Gutter. For installation standards, also refer to SBS Standards - 10.3.10: Built-in Membrane Gutters.

(2) Underlayment

The type of underlay required is determined by roof slope and material used to construct deck. Shed onto built in gutter membrane and continuity maintained under the insulation.

(3) Insulation

Tapered crickets formed from accepted insulation set in opposition to allow membrane vapour barrier / underlayment transition seal at built in gutter membrane while providing a level surface for metal panel installation.

(4) Metal Panel Underlayment

Optional

(5) Architectural Metal Roof Panel

For accepted metal roofing panel systems refer to Accepted Materials: Metal Roofing.

(6) Metal Flashing

For installation procedures refer to metal panel construction drawings in Section 8.1.4

---

2 RELATED WORK BY OTHERS

(A) Acceptable Deck

(B) Wood Nailer

For attachment of continuous edge hook flashing.

(C) Fascia Board

(D) Built-in Gutters

Slope to Drains

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

---

Back to ASM Application

Back to ASM Construction Details

Back to Construction Details