Accepted Materials - ASM Roof Systems

Jump to: navigation, search

Accepted Materials - ASM Roof Systems

Revision as of 18:31, 8 September 2016 by James Klassen (talk | contribs) (→‎Insulation Overlay Board)
To view materials in any section listed below, click on the Expand button located at the right hand side of this page

1 Vapour Retarders

The RCABC does not specify Vapour Retarders, as they are not included in the RoofStar Guarantee Program. See manufacturer specifications where Vapour Retarders are required, and refer to proprietary products and installation instructions. This cross-reference is listed for information only.

2 Deck Overlay Boards

3 Insulation

Composite Board Insulation
Template:Materials - Insulation (Composite Board)
XPS (Extruded Expanded Polystyrene Foam)
XPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Dupont Specialty Products Division - Safety and Construction Deckmate (Type 2) ‒ ‒ 110 16 0.87 5
Dupont Specialty Products Division - Safety and Construction Deckmate Plus (Type 3) ‒ ‒ 140 20 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate (Type 4) ‒ ‒ 240 35 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate CT (Type 4) ‒ ‒ 240* 35* 0.87 5
Owens Corning Canada Foamular C200 (Type 3) ‒ ‒ 140 20 0.88 5
Owens Corning Canada Foamular F350 (Type 4) ‒ ‒ 240 35 0.88 5
Owens Corning Canada Foamular 400 (Type 4) ‒ ‒ 275 40 0.88 5
Owens Corning Canada Foamular 600 (Type 4) ‒ ‒ 415 60 0.88 5
Owens Corning Canada Foamular 1000 (Type 4) ‒ ‒ 690 100 0.88 5
Owens Corning Canada Foamular 404 (Type 4) ‒ ‒ 276 40 0.88 5
Owens Corning Canada Foamular 604 (Type 4) ‒ ‒ 414 60 0.88 5
Owens Corning Canada Foamular 404RB (Type 4) ‒ ‒ 276 40 0.84 4.75
Owens Corning Canada Foamular 604RB (Type 4) ‒ ‒ 414 60 0.84 4.75
Soprema Inc. Sopra-XPS 35 ‒ ‒ 350 51 0.88 5
Soprema Inc. Sopra-XPS 40, 60, 100 ‒ ‒ 500, 600, 700 73, 87, 102 0.88 5
EPS (Expanded Polystyrene Foam)
EPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind Uplift Resistance) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm)
@24°C (74°F) 		Thermal
Resistance
(R/inch)
@24°C (74°F)
Airfoam Industries Ltd. Korolite 100 (Type 1, Flat) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Flat) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Flat) ‒ 172 25 0.74 4.27
Airfoam Industries Ltd. Korolite 100 (Type 1, Tapered) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Tapered) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Tapered) ‒ 172 25 0.74 4.27
Airfoam Industries Ltd. Korolite K130 EPS ‒ 90 13 0.66 3.8
Airfoam Industries Ltd. Korolite K200 EPS ‒ 140 20 0.71 4.1
Airfoam Industries Ltd. Korolite K300 EPS ‒ 204 30 0.74 4.27
Airfoam Industries Ltd. Korolite K400 EPS ‒ 276 40 0.74 4.27
Airfoam Industries Ltd. Korolite K600 EPS ‒ 70 10 Contact manufacturer Contact manufacturer
Airfoam Industries Ltd. Korolite KG100 GPS ‒ 110 16 Contact manufacturer Contact manufacturer
Airfoam Industries Ltd. Korolite KG160 GPS ‒ 172 25 Contact manufacturer Contact manufacturer
Airfoam Industries Ltd. Korolite KG250 GPS ‒ 172 25 Contact manufacturer Contact manufacturer
Airfoam Industries Ltd. Korolite KG300 GPS ‒ 207 30 Contact manufacturer Contact manufacturer
Airfoam Industries Ltd. Korolite KG400 GPS ‒ 276 40 Contact manufacturer Contact manufacturer
Beaver Thermal Solutions Terrafoam (Type 1, Flat) ‒ 70 10 0.65 3.75
Beaver Thermal Solutions Terrafoam (Type 2, Flat) ‒ 110 16 0.7 4.04
Beaver Thermal Solutions Terrafoam (Type 3, Flat) ‒ 140 20.4 0.74 4.27
Beaver Thermal Solutions Terrafoam (Type 1, Tapered) ‒ 70 10 0.65 3.75
Beaver Thermal Solutions Terrafoam (Type 2, Tapered) ‒ 110 16 0.7 4.04
Beaver Thermal Solutions Terrafoam (Type 3, Tapered) ‒ 140 20.4 0.74 4.27
Plasti-Fab Plastispan Insulation (Type 1) ‒ 70 10 0.65 3.75
Plasti-Fab Plastispan HD Insulation (Type 2) ‒ 110 16 0.7 4.04
Plasti-Fab Plastispan 25 Insulation (Type 3) ‒ 140 20 0.74 4.27
Plasti-Fab Plastispan Sloped Insulation ‒ ‒ ‒ ‒ ‒
Polyisocyanurate Foam
"Polyiso" Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/m3) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Atlas Roofing Corporation AC Foam III ‒ 32 138 20 1 5.7
Atlas Roofing Corporation AC Foam Supreme ‒ 32 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield HD Plus MARS PARS ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) Polyiso ‒ ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) HD Polyiso ‒ ‒ 138 20 1 5.7
Elevate (fomerly Firestone) Elevate ISOGARD CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Premier ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Composite ‒ 32 138 20 1 5.7
IKO Industries Ltd. IKOTherm III ‒ ‒ 140 20 1 5.7
Johns Manville Corporation ENRGY 3 CGF Insulation ‒ ‒ 138 20 1 5.7
Polyglass USA, Inc. Polytherm G ‒ 32.04 138 20 1 5.7
Siplast, Inc. Paratherm CG ‒ ‒ 138 20 1 5.7
Soprema Inc. Sopra-Iso Plus ‒ 32 138 20 1 5.7
Fibreboard Roof Insulation
Fibreboard Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
IKO Industries Ltd. Asphalt Fibreboard ‒ See TDS See TDS See TDS See TDS See TDS
MSL ISOLtop Natural ‒ See TDS See TDS See TDS See TDS See TDS
MSL ISOLtop Coated 6 sides ‒ See TDS See TDS See TDS See TDS See TDS
MSL ISOLtop Coated 1 side ‒ See TDS See TDS See TDS See TDS See TDS
MSL Roofcraft Base ‒ See TDS See TDS See TDS See TDS See TDS
MSL SECURpan ‒ See TDS See TDS See TDS See TDS See TDS
MSL Roofcraft Base ‒ See TDS See TDS See TDS See TDS See TDS
Perlitic Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Johns Manville Corporation Fesco Board ‒ ‒ ‒ ‒ 0.49 2.78
Mineral Fibre Roof Insulation
Mineral Fibre Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
ROCKWOOL TOPROCK® DD ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL TOPROCK® DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL MULTIFIX TM ‒ See TDS See TDS See TDS 0.68 3.8
Soprema Inc. Soprarock DD ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock MD ‒ See TDS See TDS See TDS See TDS See TDS
Soprema Inc. Soprarock MD Plus ‒ See TDS See TDS See TDS See TDS See TDS
Lightweight Insulating Concrete
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Siplast NVS Concrete ‒ 560 2070 300 N/A N/A
Siplast INSULCEL Concrete ‒ 480 1380 200 N/A N/A

4 Insulation Overlay Boards

Proprietary Insulation Overlay Boards
Template:Materials - Insulation Overlay (Proprietary)

5 ASM Underlayment

Template:Materials - ASM Eave Protection & Underlayment

6 Standing Seam Metal Roof System - Job Site Roll-forming

All architectural metal roofing accepted for application in the RoofStar Guarantee Program utilizes a locking standing seam. There are three seam types currently offered with site-formed metal roofing systems (click on a type to see an illustration). Refer to the table below for a summary of panel manufacturers and the products they supply:
  1. Mechanically locking
  2. Snap-together
  3. Snap-together with cap


Note that not all panels are made with stiffener ribs. Refer to each manufacturer's literature by clicking on the product name in the table.
Template:Materials - Site-Formed Metal Roofing Systems

7 Proprietary Metal Roof Systems (Manufactured in Plant Roll-forming)

RCABC Guarantee Corp. (RGC) accepted proprietary standing seam metal roof systems, installed in conformance with RoofStar Guarantee Standards, qualify for a five (5) or ten (10) year guarantee under the RoofStar Guarantee Program.
Template:Materials - Proprietary Metal Roof Systems



ASM Roof Systems

Accepted Materials

Application

Retrieved from "http://rpm.rcabc.org/index.php?title=Accepted_Materials_-_ASM_Roof_Systems&oldid=9168"