Materials:JM non-reinforced EPDM

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Johns Manville Corporation Accepted for RoofStar Guarantee Program 2007 Product Summary A non-reinforced cured EPDM membrane that may be fully adhered or installed loose-laid under ballast. Installation Guidelines

Click below for the Technical Data Sheet

1.11 mm (45 mil) Membrane TDS

1.52 mm (60 mil) Membrane TDS

2.28 mm (90 mil) Membrane TDS

---

Back to Accepted Materials

Home