Materials:Innovi TPO

Jump to: navigation, search

Materials:Innovi TPO

Division C - Accepted Materials

Innovi TPO
by IKO Industries Ltd.

Material Acceptance and Product Details

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

IKO Industries Ltd.
Accepted for the RoofStar Guarantee Program
June 15, 2023
Accepted for application in
Roof Waterproofing Systems
Acceptance Criteria
Product Summary
Innovi TPO, manufactured by IKO Industries Ltd., is a polyester-reinforced thermoplastic polyolefin membrane that utilizes proprietary chemistry, including Matrix TM weathering formulation, for durability in harsh conditions. The material comes in a variety of widths (refer to the Technical Data Sheet) and can be adhered or mechanically fastened. The membrane is available in three thicknesses (measurements listed below are nominal):
  • 1.14 mm (45 mils)
  • 1.52 mm (60 mils)
  • 2.03 mm (80 mils)
(adapted from the Technical Data Sheet)
Conditions and Limitations
Technical Data Sheet
Click the "PDF" icon to open the TDS in a new window.

1.14 mm (45 mil) - Technical Data Sheet Innovi TPO 1.14 mm (45 mil) TDS

1.52 mm (60 mils) - Technical Data Sheet Innovi TPO 1.52 mm (60 mils) TDS

2.03 mm (80 mils) - Technical Data Sheet Innovi TPO 2.03 mm (80 mils) TDS

Back to Accepted Materials