Materials:VMAX-AT1-1224-L/S Sloped Roof Air Intake Louvers

Jump to: navigation, search

Materials:VMAX-AT1-1224-L/S Sloped Roof Air Intake Louvers



Division C - Accepted Materials


VMAX-AT1-1224-L/S Sloped Roof Air Intake Louvers
by Ventilation Maximum Ltd.

Material Acceptance and Product Details


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer
Ventilation Maximum Ltd.
Accepted for the RoofStar Guarantee Program
January 19, 2024
Accepted for application in
Water-shedding Roof Systems
Acceptance Criteria
None
Product Summary
The VMAX-AT1-1224-L/S models are rectangular air intake louvers designed for water-shedding roof systems. These products have been designed specifically for buildings where fire code regulations are applied to prevent fire propagation to the attic via soffit air intakes, or when the presence of firewalls in an attic hinder the amount of air intake required for attic ventilation. It is also used in situations where soffits are non-existent or non-functional. Installed directly on the bottom of the roof above the eave and/or even with the fascia, these air intake louvers allow the supply of fresh air to circulate continuously in the attic to prevent the accumulation of heat and humidity.
(adapted from the Technical Data Sheet)
Conditions and Limitations
None
Technical Data Sheet
Click the "PDF" icon to open the TDS in a new window.
Technical Data Sheet

Back to Accepted Materials

Home