Difference between revisions of "Draft CD 1"

Latest revision as of 21:50, 27 October 2025

Division D - Construction Details

SBS | Metal Edge Termination ( Article 10.3.4.2.)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.). The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

SBS Details

Drawing NTS

1 WORK INCLUDED

(1) Suitable field substrate: May be the roof deck or deck overlay (if an uninsulated system), or insulation and an overlay (if conventionally insulated).
(2) Primer or adhesive: For self-adhered or adhered membranes, as required by the manufacturer.
(3) Base field membrane: Carried continuously over the outside edge at least 50.8 mm (2”) downward, or 50.8 mm past any cold joint.
(4) Sealant or mastic: Applied on membrane, beneath metal edge flashing.
(5) Metal edge flashing (flush with roof surface):: Fasteners spaced no more than 203.2 mm (8”) on the top face in two offsetting rows.; A hemmed drip edge (shown) is required (Refer to Article 13.2.2.1. for fabrication requirements).
(6) Membrane flashing strip: Applied to the metal edge flashing and overlapping onto the field membrane at least 101.6 mm (4”). Prime when required by the manufacturer (primer illustrated).
(7) Cap field membrane: Installed according to Part 9 requirements.
(8) Edge mastic: Apply mastic or another membrane-compatible sealant to the outer exposed edge of the field cap sheet membrane. Coat with granules.

2 RELATED WORK BY OTHERS

(A) Structural Roof Deck: Generic and representative only.
(B) Roof edge substrate: Wood blocking, required for conventionally insulated roofs.
(C) Wall assembly: Generic and representative only.

NOTE: See the SBS Roof Systems Standard for additional requirements.

Back to SBS Roof System Details

Home

© RCABC 2025
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

@@ Line 1: / Line 1: @@
-{| class="wikitable" | style="color: black; background-color: orange; width: 100%;text-align:center"
-| colspan="2"  | <big>'''''Notice to Reader'''''</big>
-|-
-| style="color: black; background-color: #ffffcc; width: 100%;text-align:center" | Images used in a Construction Detail are representative and <u>not intended in their representation of an assembly to be prescriptive</u>.  Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the '''RoofStar Guarantee Standards''' for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the ''Design Authority''.<br><br>The full text of applicable '''''RoofStar Guarantee Standards''''' may be read by using the <span style="color:#6495ed">'''blue hyperlinks'''</span>
-|}
+{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
+__NOTOC__
+<big><big>Division D - Construction Details</big></big>
+<hr>
+<big><big><big><big><big>SBS | Metal Edge Termination ([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edge | Article 10.3.4.2.]])</big></big></big></big></big>
+{{Template:Construction Details Header}}
 <div class="panel panel-success">
-<div class="panel-heading"><big>'''ASM Details'''</big></div>
+<div class="panel-heading"><big>'''SBS Details'''</big></div>
 <div class="panel-body">
 <div class="col-md-6">
 <div style="text-align:center; vertical-align:center">
-[[File:ASM 8.1.1 Eave Protection and Underlayment.jpg |class=img-responsive | link=http://rpm.rcabc.org/images/b/bb/ASM_8.1.1_Eave_Protection_and_Underlayment.jpg]]
+<br>
+[[File:10.3.2.3.-EPDM-A.png |class=img-responsive | link=https://rpm.rcabc.org/images/5/53/10.3.2.3.-EPDM-A.png]]
+:Drawing NTS
 </div>
-</div><!-- COL-MD-6 -->
+</div><!-- COL-6-MD -->
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) Metal flashing underlayment/separation membrane: required for metal flashings installed on wood substrates.
-;(2) '''Edge Metal Flashing''': Installed to manufacturer's printed instructions.
-;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMICE|'''Ice and Water Protection''']]: One ply of accepted self-adhered modified bituminous membrane.
-;(4) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMUNDERLAYMENT|'''Underlayment''']]: Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
-:'''Note:'''
+;(1) <big>Suitable field substrate</big>:
-* This application pertains only to slopes 1:3 (4" in 12") or greater.  For slopes less than 1:3, see Construction Detail '''ASM 8.1.2'''.
+:May be the [[SBS Roof Systems Standard#PART_2| roof ''deck'']] or [[SBS Roof Systems Standard#PART_5 |''deck'' overlay]] (if an uninsulated system), or [[SBS Roof Systems Standard#PART_8| insulation and an overlay]] (if ''conventionally insulated'').
-* Slip sheet not shown for clarity
+;(2) <big>Primer or adhesive</big>:
+:For self-adhered or adhered membranes, as required by the ''manufacturer''.
+;(3) [[SBS Roof Systems Standard#PART_9|<big>Base field membrane</big>]]:
+:Carried continuously over the outside edge at least 50.8 mm (2”) downward, or 50.8 mm past any cold joint.
+;(4) <big>Sealant or mastic</big>:
+:Applied on membrane, beneath metal edge flashing.
+;(5) <big>[[SBS Roof Systems Standard#PART_13| Metal edge flashing</big>]] (flush with roof surface):
+:Fasteners spaced no more than 203.2 mm (8”) on the top face in two offsetting rows.
+:A hemmed drip edge (shown) is required (Refer to Article 13.2.2.1. for fabrication requirements).
+;(6) [[SBS Roof Systems Standard#PART_9|<big>Membrane flashing strip</big>]]:
+:Applied to the metal edge flashing and overlapping onto the field membrane at least 101.6 mm (4”). Prime when required by the ''manufacturer'' (primer illustrated).
+;(7) [[SBS Roof Systems Standard#PART_9|<big>Cap field membrane</big>]]:
+:Installed according to Part 9 requirements.
+;(8) <big>Edge mastic</big>:
+:Apply mastic or another membrane-compatible sealant to the outer exposed edge of the field cap sheet membrane.  Coat with granules.
-<hr>
+=== RELATED WORK BY OTHERS ===
+;(A) [[SBS Roof Systems Standard#PART_2|<big>Structural Roof Deck</big>]]
+:Generic and representative only.
+;(B) [[EPDM Roof Systems Standard#PART_10|<big>Roof edge substrate</big>]]
+:Wood blocking, required for conventionally insulated roofs.
+;(C) <big>Wall assembly</big>
+:Generic and representative only.
-=== RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMDECK|'''Acceptable Deck''']]
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->
 </div><!-- PANEL -->
+'''NOTE''': See the [[SBS Roof Systems Standard | '''SBS Roof Systems Standard''']] for additional requirements.
-'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.
+<hr>
-<hr>
+[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Roof System Details'']]
-[[RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems|<i class="fa fa-chevron-circle-right fa" ></i> RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems]]
+[[Main Page | <i class="fa fa-home fa"></i> Home]]
-[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]
+{{Template:RPM Page Footer with Copyright and Current Date}}

Difference between revisions of "Draft CD 1"

Difference between revisions of "Draft CD 1"

Latest revision as of 21:50, 27 October 2025

1 WORK INCLUDED

2 RELATED WORK BY OTHERS

3 Accept Terms Of Use