Difference between revisions of "Materials:Ridgeline SS 675"

Jump to: navigation, search

Difference between revisions of "Materials:Ridgeline SS 675"

(Created page with "__NOTOC__ __NONUMBEREDHEADINGS__ {{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}} <big>...")
 
 
Line 5: Line 5:
 
<big><big>Division C - Accepted Materials</big></big>
 
<big><big>Division C - Accepted Materials</big></big>
 
<hr>
 
<hr>
−
<big><big><big><big><big>SS 675 (Snap Lock)</big></big></big></big></big><br>
+
<big><big><big><big><big>SSQ 675 (Snap Lock)</big></big></big></big></big><br>
 
<big><big><big>by Ridgeline Exteriors Inc.</big></big></big><br>
 
<big><big><big>by Ridgeline Exteriors Inc.</big></big></big><br>
 
{| class="wikitable"
 
{| class="wikitable"
Line 14: Line 14:
 
|-
 
|-
 
|  
 
|  
−
;'''Manufacturer''': (Active Member Name here)
+
;'''Manufacturer''': Ridgeline Exteriors Inc.
 
;'''Contact Address''': See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
 
;'''Contact Address''': See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
 
;'''Product Group - Standing Seam Metal Roof System'''
 
;'''Product Group - Standing Seam Metal Roof System'''
−
;'''Panel Machine''': Machine Name (Model number)
+
;'''Panel Machine''': New Tech Machinery SSQ II
−
;'''Panel Name''': Name
+
;'''Panel Name''': SSQ 675
−
;'''Seam Type''': Mechanical Lock/Snap-Lock/Flange-fastened
+
;'''Seam Type''': Snap Lock
  
 
The roofing assembly / material information published below and in the [http://{{SERVERNAME}}/index.php?title=Main_Page RCABC Roofing Practices Manual] DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority.  For more information about this product or system, consult the manufacturer.
 
The roofing assembly / material information published below and in the [http://{{SERVERNAME}}/index.php?title=Main_Page RCABC Roofing Practices Manual] DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority.  For more information about this product or system, consult the manufacturer.
Line 25: Line 25:
  
 
====OVERVIEW====
 
====OVERVIEW====
−
(The following overview is boilerplate wording and can be modified to suit the specific panel description.
+
The Snap Lock II 675 Panel is an on-site continuous panel metal made with the New Tech Machinery SSQ II Machine. This machine produces a snap-lock panel seam with a seam height of 44 mm (1-3/4") and profiles can vary from 300 mm (12") wide up to 500 mm (20") wide.
−
The (panel name) metal panel is formed with an on-site/in shop continuous metal roofing panel roll forming machine (Machine name). This machine produces a standing seam panel with a seam height of XXX mm (XX") and profiles can vary from XXX mm (XX") wide up to XXX mm (XX") wide.
 
  
−
On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to XXX'.
+
On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to nominal 46 m (150').
  
 
====SYSTEM DESCRIPTION====
 
====SYSTEM DESCRIPTION====
 
<ol>
 
<ol>
−
<li>'''General''': The (panel name) metal panel is secured with concealed fastener.
+
<li>'''General''': The SSQ675 44 mm (1-3/4") Snap-Lock profile is a snap lock concealed fastener roofing panel. The panel can be formed in any width between 300 mm (12") and 450 mm (18"). Stiffening ribs, striations and / or clip relief can be added depending in the application. The male leg locks along the entire length of the panel and does not rely upon clips to provide additional locking. The SS675 utilizes 153 mm (6-1/8") of metal in forming the panel legs providing greater structural integrity, which can carry greater loads.
−
<li>'''Range of application''': Installed on wood or steel sloped roofs, in commercial, institutional, industrial and residential construction. For re-roofing or new construction.
+
<li>'''Range of application''': On wood or metal sloped roofs; in commercial, institutional, industrial and residential construction; for re-roofing or new construction.
 +
<li>'''Panel Coverage''': 300 mm (12") to 600 mm (24")
 
<li>'''Panel Attachment''': Fastening is site specific, engineer must confirm fixing specifications.
 
<li>'''Panel Attachment''': Fastening is site specific, engineer must confirm fixing specifications.
 
<li>'''Fasteners (Screws)''':  
 
<li>'''Fasteners (Screws)''':  
 
<ol>
 
<ol>
−
<li>Fasteners used to attach panel clips to steel must be No. XX-XX by XX mm (X") long self-drilling, (screw type - i.e., self-tapping pancake head plated steel) screws. Use (i.e., two fasteners per panel clip), inserted into panel clip guide holes.
+
<li>Fasteners used to attach panel clips to steel to be No. 10-16 by 25 mm (1") long cadmium plated pancake head No. 2 Phillips drive, No. 3 self-drilling point steel screws. Two screws per clip inserted through 6.25 mm (1/4") diameter guide holes.
−
<li>Fasteners used to attach panel clips to plywood must be No. XX-XX by XX mm (X") long (screw type - i.e., self-tapping pancake head plated steel) screws for wood. Use (i.e., two fasteners per panel clip), inserted into panel clip guide holes.
 
 
</li></ol>
 
</li></ol>
−
<li>'''Panel Clips''': One piece assembly XX mm (X") wide, XX mm (X") high, manufactured by (name of panel manufacturer) (or approved equal). Minimum thickness 0.022 in. (No. 22 MSG). Clips spaced maximum 600 mm (24") O.C., or as specified on engineered shop drawings (Ref. Standard for Architectural Sheet Metal (ASM) Roof Systems, [http://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#3.1.3.3._Resistance_to_Specified_Wind_Loads  Article 3.1.3.3.] and [http://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#3.1.3.5._Submittals Article 3.1.3.5.]).
+
<li>'''Panel Clips''': One piece assembly, No. 22 MSG min thick, 87.5 mm (3-1/2") wide, 47.6 mm (1-7/8 in.) high. One panel clip spaced at 600 mm (24") on centre, or as specified on engineered shop drawings (Ref. Standard for Architectural Sheet Metal (ASM) Roof Systems, [http://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#3.1.3.3._Resistance_to_Specified_Wind_Loads  Article 3.1.3.3.] and [http://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#3.1.3.5._Submittals Article 3.1.3.5.]).
 
<li>'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
 
<li>'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
 
</li></ol>
 
</li></ol>
  
 
====PROFILE====
 
====PROFILE====
−
N/A
+
{| class="wikitable"
 +
|-
 +
! 1-3/4" Snap Lock
 +
|-
 +
| [[File:Ridgeline SS 675 Panel Profile.png|frameless|link=https://rpm.rcabc.org/images/9/90/Ridgeline_SS_675_Panel_Profile.png|750px]]
 +
|}
  
 
====TECHNICAL DATA SHEET====
 
====TECHNICAL DATA SHEET====
−
N/A
+
Click below for the '''Technical Data Sheet'''
 +
 
 +
<div class="col-md-12">
 +
<div class="col-md-1">
 +
<div style="text-align: center;">
 +
[[File:Pdf.png|75 px|link=https://rpm.rcabc.org/images/9/9b/Ridgeline_SS_675_Panel_TDS.pdf|'''Technical Data Sheet''']]
 +
Panel TDS
 +
</div>
 +
</div>
 +
</div>
 +
<div class="col-md-12">
 +
</div>
  
 
====SITE CONDITIONS====
 
====SITE CONDITIONS====
−
Minimum roof slope is 1:6 (2" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" in 12").
+
Minimum roof slope is 1:6 (2" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:4 (3" in 12").
  
 
====PERFORMANCE REQUIREMENTS====
 
====PERFORMANCE REQUIREMENTS====

Latest revision as of 20:31, 4 November 2024



Division C - Accepted Materials

SSQ 675 (Snap Lock)
by Ridgeline Exteriors Inc.

The metal panel listed and described below is accepted for use in the RoofStar Guarantee Program.
Manufacturer
Ridgeline Exteriors Inc.
Contact Address
See the current Membership list and contact information at www.rcabc.org
Product Group - Standing Seam Metal Roof System
Panel Machine
New Tech Machinery SSQ II
Panel Name
SSQ 675
Seam Type
Snap Lock

The roofing assembly / material information published below and in the RCABC Roofing Practices Manual DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority. For more information about this product or system, consult the manufacturer.

OVERVIEW

The Snap Lock II 675 Panel is an on-site continuous panel metal made with the New Tech Machinery SSQ II Machine. This machine produces a snap-lock panel seam with a seam height of 44 mm (1-3/4") and profiles can vary from 300 mm (12") wide up to 500 mm (20") wide.

On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to nominal 46 m (150').

SYSTEM DESCRIPTION

  1. General: The SSQ675 44 mm (1-3/4") Snap-Lock profile is a snap lock concealed fastener roofing panel. The panel can be formed in any width between 300 mm (12") and 450 mm (18"). Stiffening ribs, striations and / or clip relief can be added depending in the application. The male leg locks along the entire length of the panel and does not rely upon clips to provide additional locking. The SS675 utilizes 153 mm (6-1/8") of metal in forming the panel legs providing greater structural integrity, which can carry greater loads.
  2. Range of application: On wood or metal sloped roofs; in commercial, institutional, industrial and residential construction; for re-roofing or new construction.
  3. Panel Coverage: 300 mm (12") to 600 mm (24")
  4. Panel Attachment: Fastening is site specific, engineer must confirm fixing specifications.
  5. Fasteners (Screws):
    1. Fasteners used to attach panel clips to steel to be No. 10-16 by 25 mm (1") long cadmium plated pancake head No. 2 Phillips drive, No. 3 self-drilling point steel screws. Two screws per clip inserted through 6.25 mm (1/4") diameter guide holes.
  6. Panel Clips: One piece assembly, No. 22 MSG min thick, 87.5 mm (3-1/2") wide, 47.6 mm (1-7/8 in.) high. One panel clip spaced at 600 mm (24") on centre, or as specified on engineered shop drawings (Ref. Standard for Architectural Sheet Metal (ASM) Roof Systems, Article 3.1.3.3. and Article 3.1.3.5.).
  7. Deck Requirements: in keeping with the Standard for Architectural Sheet Metal (ASM) Systems.

PROFILE

1-3/4" Snap Lock
Ridgeline SS 675 Panel Profile.png

TECHNICAL DATA SHEET

Click below for the Technical Data Sheet

Technical Data Sheet Panel TDS

SITE CONDITIONS

Minimum roof slope is 1:6 (2" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:4 (3" in 12").

PERFORMANCE REQUIREMENTS

  1. Wind Uplift Resistance: Panel securement shall conform to the requirements in Part 3 of the Standard for Architectural Sheet Metal (ASM) Systems.
  2. Materials:RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the requirements published in Section 9.2. of the Standard.


Back to Site-Formed Metal Roofing Systems

Back to Accepted Materials


Home

Retrieved from "http://rpm.rcabc.org/index.php?title=Materials:Ridgeline_SS_675&oldid=50127"