ASM Roof System Details
ASM Roof System Details
- Division D - Construction Details
- Construction Details for Architectural Sheet Metal (ASM) Roof Systems
- The drawings linked on this page are intended to represent a variety of ASM roof system applications while remaining generic with regards to manufacturer's specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about Architectural Sheet Metal Roof System designs and requirements, see the Standard for Architectural Sheet Metal (ASM) Roof Systems.
Part 6 - Air and Vapour Controls
Continuity and Support ( Article 6.3.2.1.)
Part 8 - Eave, Valley, and Field Underlayment
Eave Protection/Underlayment (Slopes 1:3 or More) ( Article 8.3.2.1. and Article 8.3.2.3.)
Eave Protection/Underlayment (Slopes Less Than 1:3) ( Article 8.3.2.1. and Article 8.3.2.4.)
Part 10 - Perimeters and Valleys
Roof-Wall Connections ( Article 10.3.2.3.)
Ridges ( Article 10.3.4.1.)
Eave and Rake Edge Details ( Article 10.3.4.2.)
- Eave and Rake Edges (Mechanical Seams)
- Eave and Rake Edges (Snap-Lock Seams)
- Eave and Rake Edges (Copper)
- Eave and Rake Edges (Zinc)
Valleys ( Article 10.3.5.2.)
Part 11 - Drainage
Membrane Gutters ( Article 11.3.3.8.)
Part 12 - Penetrations and Curbs
Penetration Flashing ( Article 12.3.2.1.)
Curbs ( Article 12.3.2.4.)
Part 13 - Linear Metal Flashing
- See the separate page, Details for Linear Metal Flashings.
© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.