Search results

Jump to: navigation, search

Search results

Create the page "Insulation" on this wiki! See also the search results found.

Page title matches

Page text matches

  • File:11.1.3.5.10.jpg
    ...the organic fibres of the felt which swell into a ridge over each joint of insulation in “picture frame” pattern.
    (519 × 263 (21 KB)) - 20:28, 20 February 2012
  • File:11.1.3.5.7.jpg
    ...eck and insulation, layers of insulation, or built-up roofing membrane and insulation.
    (590 × 185 (23 KB)) - 20:38, 20 February 2012
  • File:11.1.3.5.9.jpg
    ...the organic fibres of the felt which swell into a ridge over each joint of insulation in “picture frame” pattern.
    (576 × 193 (19 KB)) - 20:39, 20 February 2012
  • Category:5.0 Before Delete
    ...heir protective surfacing will allow many minor anomalies, such as deck or insulation unevenness, to readily telescope through to the roof surface. Over time, d Slope can be provided by sloping the deck, or using tapered insulation boards of insulating fill (insulating fill is rarely used in B.C.). A minim
    0 members (0 subcategories, 0 files) - 16:30, 23 June 2015
  • Insulation Joints and Overlay
    #REDIRECT [[Insulation Joints and Overlays]]
    44 bytes (5 words) - 15:50, 23 October 2018
  • Roof Classes
    ...C) test and classify roof assemblies (includes roof deck, vapour retarder, insulation, membrane, etc.), roof components, and (specifically) roof-covering materia
    5 KB (808 words) - 16:06, 9 September 2021
  • Materials:2-1 SopraSmart ISO HD HP Sanded
    ...heet membrane that is factory-laminated to a high-density Polyisocyanurate insulation support panel (SOPRA-ISO PLUS HD). The panel may be installed with hot bit
    2 KB (326 words) - 17:20, 16 June 2023
  • Section:Insulation Joints and Overlay
    #REDIRECT [[Insulation Joints and Overlay]]
    43 bytes (5 words) - 18:19, 25 November 2015
  • Section:B. Essential Elements
    ...ts and Overlay|<i class="fa fa-hand-o-right" aria-hidden="true"></i> <big>Insulation Joints and Overlay Boards</big>]]
    2 KB (290 words) - 20:13, 22 August 2016
  • SBS Introduction
    ...heir protective surfacing will allow many minor anomalies, such as deck or insulation unevenness, to readily telescope through to the roof surface. Over time, d
    22 KB (3,281 words) - 21:46, 17 July 2017
  • INSULCEL Concrete
    ...tyrene insulation board can be installed in thicknesses necessary for high insulation values and in a stair stepped fashion, facilitating a positive slope to dra :Poured 25 mm (1") for NVS and 50 mm (2") for Insulcel thickness over EPS insulation, these LWIC systems have been engineered for use over non-slotted or slotte
    3 KB (474 words) - 21:16, 12 February 2019
  • Template:SBS Adhesives - SDS
    || Siplast || Siplast SBS Para-Stik Insulation Adhesive || style="text-align:center;"| '''TDS''' || style="text-align:cent || Siplast || Siplast SBS Parafast Insulation Adhesive C Part 1 || style="text-align:center;"| '''TDS''' || style="text-a
    17 KB (2,334 words) - 18:57, 14 September 2017
  • BUR Membrane Systems
    ::[[BUR Roof Systems Standard#BURINSULATION |7 INSULATION]] ::[[BUR Roof Systems Standard#BURINSULATIONOVERLAY |8 INSULATION OVERLAY BOARD]]
    2 KB (209 words) - 21:11, 30 August 2021
  • Materials:Paratherm HD
    ;Accepted for application in: Waterproofing Systems (roofs)(high-density insulation overlay)<br>Water-shedding Systems (ASM and Asphalt Shingles) :*is a rigid roof insulation boards comprised of a high-density closed cell polyisocyanurate fo
    1 KB (196 words) - 15:40, 27 October 2020
  • Materials:Paratherm W HD
    ;Accepted for application in: Waterproofing Systems (roofs)(high-density insulation overlay)<br>Water-shedding Systems (ASM and Asphalt Shingles) :*is a rigid roof insulation boards comprised of a high-density closed cell polyisocyanurate fo
    1 KB (196 words) - 15:42, 27 October 2020
  • Template:NOTES to SBS Standard
    ...ng system'' is defined by whatever is placed on the membrane, which may be insulation, ballast, pavers or overburden. These materials will displace water and th ...e roof membrane, while retaining existing ''roof system'' components (i.e. insulation, ballast).
    30 KB (4,336 words) - 21:13, 18 August 2021
  • Materials:MONOBOARD® PLUS
    ...g applications, accepted by the '''''RoofStar Guarantee Program''''' as an insulation overlay board.
    1 KB (148 words) - 21:40, 13 November 2020
  • Template:Materials - Insulation (XPS)
    |+ XPS Insulation<br><small>Click on a manufacturer's name to see the full list of their prod
    6 KB (593 words) - 22:15, 21 September 2023
  • Manufacturers:Elevate
    ====Insulation==== ====Insulation Overlay Panels====
    3 KB (432 words) - 21:52, 28 March 2024
  • Template:PERIMETER FLASHINGS - MEMBRANES (SBS)
    ...verlay boards (minimum thickness 4.5 mm (3/16") nominal) or insulation and insulation overlay boards specifically designed for torch applications''' - mechanical
    14 KB (2,091 words) - 22:59, 9 November 2018
  • Template:ROOFTOP GARDENS, PLANTERS & WALKWAYS (EPDM, TPO)
    ...tion of, a roof or waterproofing membrane assembly. This excludes thermal insulation but includes, and is not limited to, || 2018-January-25 }} ...oot intrusion barrier, and drainage layer. Tightly butt all protection and insulation boards, overlap all filter mat seams and seal all laps of roof intrusion ba
    21 KB (2,722 words) - 14:55, 25 September 2017
  • Template:ROOFTOP GARDENS, PLANTERS & WALKWAYS (SBS)
    ...tion of, a roof or waterproofing membrane assembly. This excludes thermal insulation but includes, and is not limited to, || 2018-January-25 }} ...oot intrusion barrier, and drainage layer. Tightly butt all protection and insulation boards, overlap all filter mat seams and seal all laps of roof intrusion ba
    21 KB (2,856 words) - 22:57, 9 November 2018
  • Template:All Systems - INSULATION
    Only RoofStar-accepted insulation materials, specifically listed by membrane manufacturers in this Manual as ...be installed under two (2) offset / staggered layers of RoofStar-accepted insulation overlay boards.
    14 KB (2,160 words) - 15:21, 29 September 2016
  • Template:All systems - ROOF DECKS EPDM, TPO
    ...ched) roofing membranes that are adhered directly to concrete decks unless insulation is installed directly above or over the membrane. ...tened insulation, the gypsum board must be fastened independently from the insulation. The minimum number of fasteners(screws or screws and plate) is four (4) pe
    5 KB (815 words) - 16:33, 29 September 2016
  • Template:All systems - ROOF DECKS
    ...ight, and free of "humps" or depressions. These can counteract any sloped insulation systems installed by the roofing contractor and cause ponding. On new cons ...vel in the roof deck are less than the percentage of slope provided by the insulation.</span> <span class="recommended">A minimum slope of 1:50 (1/4" in 12") is
    20 KB (3,072 words) - 15:18, 15 January 2019
  • Materials:Sopra-XPS 35
    ...polystyrene with square edges, suitable for heavy loads. '''Sopra-XPS''' insulation is used in Protected Membrane Roof Assemblies and on plaza decks.
    1 KB (152 words) - 22:29, 31 January 2019
  • Materials:Sopra-XPS 40, 60, 100
    ...polystyrene with square edges, suitable for heavy loads. '''Sopra-XPS''' insulation is used in Protected Membrane Roof Assemblies and on plaza decks.
    1 KB (155 words) - 22:31, 31 January 2019
  • Material Classification and Application for Acceptance
    *Insulation (board or panel; tapered) *Insulation overlay board
    22 KB (3,050 words) - 16:20, 12 December 2023
  • SBS Modified Bitumen Application Guides and Notes
    * Use a protective base sheet on all wood decks and over ignitable insulation, can strips or other flammable surfaces. ...all ignitable insulation surfaces, edges and over all joints between rigid insulation boards. The base ply provides a protective covering for underlying ignitab
    14 KB (2,333 words) - 16:39, 9 February 2022
  • Accepted Materials - SBS Modified Bitumen Membrane Systems
    .../index.php?title=Standard_for_SBS-Modified_Bitumen_Membrane_Systems#PART_7 Insulation]=== :<big><big>Composite Board Insulation</big></big>
    6 KB (742 words) - 20:36, 27 July 2021
  • Template:Materials - Insulation (EPS)
    |+ EPS Insulation<br><small>Click on a manufacturer's name to see the full list of their prod ...| Plasti-Fab]]''' || [[Materials:Plastispan Insulation (Type 1)|Plastispan Insulation (Type 1)]] || style="text-align:center;"| ‒ || style="text-align:center;"
    7 KB (630 words) - 17:46, 24 June 2022
  • Manufacturers:Airfoam Industries Ltd.
    ====Insulation====
    2 KB (242 words) - 20:44, 8 June 2023
  • (Draft) PVC Roof Systems Standard
    | [[#PART_7 | Part 7 - Insulation]] | [[#PART_8 | Part 8 - Insulation Overlays]]
    416 KB (56,532 words) - 22:23, 5 April 2024
  • (Draft) EPDM Roof Systems Standard
    | [[#PART_7 | Part 7 - Insulation]] | [[#PART_8 | Part 8 - Insulation Overlays]]
    424 KB (57,418 words) - 22:20, 5 April 2024
  • (Draft) TPO Roof Systems Standard
    | [[#PART_7 | Part 7 - Insulation]] | [[#PART_8 | Part 8 - Insulation Overlays]]
    421 KB (57,062 words) - 22:20, 5 April 2024
  • (Draft) Hot Rubber Roof Systems Standard
    | [[#PART_7 | Part 7 - Insulation]] | [[#PART_8 | Part 8 - Insulation Overlays]]
    296 KB (41,811 words) - 22:23, 5 April 2024
  • Template:MARS Membrane - SBS 2-Ply Base
    ...="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Insulation<br>Overlay </small> ...="1" rowspan="2" style="vertical-align:center;text-align:center;" | <small>Insulation </small>
    5 KB (558 words) - 14:26, 7 April 2020
  • Materials:Sopraboard
    ...n flat or low-slope roofing. It can be installed over word decks or rigid insulation as an overlay board.</td>
    2 KB (285 words) - 20:47, 26 August 2021
  • Materials by Product Category
    <big><big>'''Secondary Materials: Insulation & Overlays'''</big></big> ...s - Insulation (Waterproofing Systems) | <i class="fa fa-caret-right"></i> Insulation]]</big>
    13 KB (1,636 words) - 17:02, 5 January 2024
  • Roof Decks
    ...ight, and free of "humps" or depressions. These can counteract any sloped insulation systems installed by the roofing contractor and cause ponding. On new cons ...vel in the roof deck are less than the percentage of slope provided by the insulation. A minimum slope of 1:50 (1/4" in 12") is strongly recommended. The except
    20 KB (2,969 words) - 16:06, 9 September 2021
  • Deck and Wall Overlays
    ...he membrane, or as a thermal barrier between the roof deck and combustible insulation.
    1 KB (198 words) - 15:33, 9 September 2021
  • Requirements
    ...testing is specified, testing shall be conducted prior to installation of insulation and roof coverings, and must be performed to ''ASTM D5957''.
    11 KB (1,608 words) - 22:03, 3 May 2021
  • Structure and Organization of RPM and Standards
    | Part 7 || '''Insulation''' | Part 8 || '''Insulation Overlays''' (Eave protection, Underlayments, and ventilation, in the Standa
    15 KB (2,132 words) - 19:02, 18 August 2023
  • Insulating the Roof
    [[File:Low-slope Roof Insulation.jpg|300 px]] ...ctions. As part of the roof assembly, properly designed and installed roof insulation provides the following benefits:
    23 KB (3,279 words) - 15:42, 9 September 2021
  • Template:Materials - Insulation (Polyisocyanurate)
    |+ "Polyiso" Insulation<br><small>Click on a manufacturer's name to see the full list of their prod ...| style="text-align:left;"| [[Materials:SecurShield RapidLock (RL) Polyiso Insulation | {{hilite | SecurShield RapidLock (RL) Polyiso || 2024-October-20 }}]] ||
    7 KB (675 words) - 16:30, 31 October 2023
  • Materials:Retrofit Board
    ...layer in reroofing and in new construction as a top layer in a multi-layer insulation system. :Retro-Fit Board Insulation / Overlay
    3 KB (393 words) - 22:01, 3 November 2016
  • Materials:Invinsa Roof Board
    ...ntegral component of the roof system, providing a protective layer for the insulation, while working with the membrane above to ensure maximum performance and lo
    6 KB (890 words) - 22:10, 3 November 2016
  • Materials:Securtorch
    ;'''Product Summary''': Securtorch is a safe and unique fireboard roofing insulation coated with a thick layer of asphalt covered with a thermofusible protectiv
    4 KB (512 words) - 22:23, 3 November 2016
  • Template:Deck Overlay - EPDM, TPO
    ...he membrane, or as a thermal barrier between the roof deck and combustible insulation.</p> ...ched) roofing membranes that are adhered directly to concrete decks unless insulation is installed directly above or over the membrane.
    5 KB (701 words) - 20:29, 24 October 2017
  • Filter Mats
    Refer to the '''Insulation''' or '''Membrane''' Manufacturer's specifications.
    227 bytes (26 words) - 13:51, 27 July 2021
  • Waterproofing Systems: Leak Detection & Monitoring Systems
    ...terproofing membranes, testing shall be conducted prior to installation of insulation and overburdens and be performed to ASTM D5957 - 98.
    2 KB (249 words) - 22:45, 9 November 2016
  • Template:Insulation (Polyurethane)
    ...ed from fluorocarbon vapour trapped in the foam's cells. Polyurethane roof insulation boards are generally available in either: ...r (such as gypsum board) should be installed between the roof deck and the insulation.
    3 KB (429 words) - 16:03, 29 September 2016
  • Roofs - Insulation (Waterproofing Systems)
    <big><big><big><big><big>Roofs: Insulation</big></big></big></big></big> ===Heat-resistant Insulation===
    3 KB (377 words) - 21:49, 7 September 2021
  • Insulation Joints and Overlays
    <big><big><big><big><big>Insulation Joints and Overlays</big></big></big></big></big> Insulation overlays are used to separate the roof membrane from the primary insulation, usually for one of two reasons:
    4 KB (532 words) - 15:44, 9 September 2021
  • SBS Fall Protection Anchor in Roof
    ;(6) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manua
    3 KB (360 words) - 18:16, 27 October 2023
  • SBS Fall Protection Anchor in Wall
    ;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: See available insulation products in Division C of this ''Manual''.
    2 KB (262 words) - 18:33, 27 June 2022
  • SBS Fall Protection Anchor in Wall (Protected)
    ...[[SBS Roof Systems Standard#PART_7|'''Insulation - XPS''']]: See available insulation products in Division C of this ''Manual''.
    2 KB (284 words) - 18:34, 27 June 2022
  • TPO Protected Roof Assembly (Typical)
    ...ed. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Division C | Division C]] of this Manual.
    3 KB (429 words) - 21:34, 27 June 2022
  • EPDM Conventionally Insulated System (Typical)
    ...Standard#PART_5|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...ed. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Division C | Division C]] of this Manual.
    3 KB (367 words) - 21:52, 27 June 2022
  • EPDM Details:D2.7.6-3 Curbs & Sleepers (Basic Curb)
    ...s#EPDMSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (351 words) - 16:48, 23 October 2017
  • EPDM Details:D2.7.6-4 Curbs & Sleepers (Mechanical Opening)
    ...s#EPDMSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (347 words) - 16:48, 23 October 2017
  • EPDM Details:D2.7.7-2 Strip-in Flashings (Two-part Cable)
    ...s#EPDMSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (332 words) - 16:49, 23 October 2017
  • EPDM Details:D2.7.8-3 Water & Drainage (Clamping Spun Copper Drain)
    ...s#EPDMSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (334 words) - 18:30, 23 October 2017
  • Materials:Perma-Board
    <td colspan=2>PERMA-BOARD is designed to be used as an overlay to insulation and as a base for modified, built-up and single ply membranes. Elastomeric
    3 KB (361 words) - 22:21, 3 November 2016
  • Insulation Joint Tape
    <big><big><big><big><big>Roofs: Insulation Joint Tape</big></big></big></big></big> <big><big>[[Insulation Joints and Overlay|Insulation Joint Tape]]</big></big>
    960 bytes (129 words) - 21:48, 7 September 2021
  • Fasteners
    ...materials due to thermal and moisture variations. Traditionally, the roof insulation and roofing are secured to the roof deck by means of mechanical fastening, '''''RoofStar Guarantee Standards''''' requires mechanical fastening of the insulation wherever practical. Over concrete and other non-nailable decks, or where me
    7 KB (999 words) - 15:42, 9 September 2021
  • Understanding the Code
    ...tables specified minimum thermal resistance values, depending on where the insulation was installed, but these requirements were not integrated with the design a
    21 KB (3,118 words) - 16:32, 16 March 2023
  • SBS Open-wall Scupper Drain
    ...Standard#PART_7|'''Insulation''']]: Mechanically fastened. See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manua ;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Where required.
    3 KB (440 words) - 18:14, 27 October 2023
  • SBS Through-wall Scupper Drain
    ;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manua ;(3) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Where required.
    3 KB (420 words) - 18:15, 27 October 2023
  • BUR Materials
    ...existing coal tar pitch roofs. In these cases a separation layer, such as insulation board, is often used to prevent the asphalt system from contacting any trac | Insulation || +204°C (+400°F) to +149°C (+300°F) || 16 Seconds
    15 KB (2,293 words) - 15:33, 9 September 2021
  • Membrane Surfaces
    ...re the insulation is above the membrane, the gravel is used to protect the insulation from ultraviolet rays, wind uplift, and flotation. For ballast and securem
    8 KB (1,280 words) - 16:25, 9 September 2021
  • Protected and Modified Protected Roof Systems
    ...#8220;conventional&#8221; roof assembly the roof membrane is on top of the insulation where it is subject to many life-shortening elements, and it must function ...roduce a problem with vapour trapped within the assembly. This can lead to insulation and roof membrane deterioration and, eventually, roof failure.
    11 KB (1,624 words) - 16:21, 9 September 2021
  • Building Ventilation
    ...h living space condenses in the attic, producing moisture on wood framing, insulation and roofing. || [[File:Roofventcold.gif]] || Proper ventilation allows mois ...all be designed to prevent the entry of rain, snow and insects. || Ceiling insulation shall not be installed in a manner that will restrict free flow of air thou
    6 KB (911 words) - 15:33, 9 September 2021
  • TPO Details:D3.7.3-3 Edges & Fascia (Roof Edge)
    ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual. ...yed (3A: 2- part low rising insulation adhesive, specifically used to bond insulation and cover boards)
    4 KB (462 words) - 17:01, 23 October 2017
  • EPDM Conventionally Insulated System (Alternate)
    ...ts. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Division C | Division C]] of this Manual.
    2 KB (281 words) - 21:53, 27 June 2022
  • EPDM Protected Roof Assembly (Typical)
    ...ed. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Division C | Division C]] of this Manual.
    3 KB (422 words) - 21:33, 27 June 2022
  • TPO Details:D3.7.6-4 Curbs & Sleepers (Mechanical Opening)
    ...es#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (382 words) - 17:02, 23 October 2017
  • TPO Details:D3.7.6-3 Curbs & Sleepers (Basic Curb)
    ...es#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (360 words) - 17:01, 23 October 2017
  • TPO Details:D3.7.8-3 Water & Drainage (Clamping Spun Copper Drain)
    ...es#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (374 words) - 17:02, 23 October 2017
  • TPO Details:D3.7.7-2 Strip-in Flashings (Two-part Cable)
    ...es#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (373 words) - 17:02, 23 October 2017
  • Polyisocyanurate Foam
    ...lso Accepted Roof Deck Insulation products by clicking on this [[Roof Deck Insulation|link]]. :{{Template:Insulation (Polyiso)}}
    146 bytes (19 words) - 17:16, 17 June 2016
  • Manufacturers:USG (CGC) SecureRock
    ====Insulation Overlay Panels==== ====Insulation Overlay Panels====
    4 KB (466 words) - 22:03, 23 October 2023
  • Manufacturers:Georgia-Pacific Canada Ltd.
    ====Insulation Overlay Panels==== ====Insulation Overlay Panels====
    3 KB (409 words) - 14:16, 8 June 2023
  • Materials:DensDeck Roofboard
    ...and a water-resistant treated core, and is an accepted deck overlay and an insulation overlay board in the '''''RoofStar Guarantee Program'''''.
    1 KB (165 words) - 14:34, 14 April 2020
  • Insulation Overlays (Water-shedding Systems)
    ...g Roof System (typically ASM) to separate the roof panels from the primary insulation, and to provide a flat, firm surface for the installation of panel clips (u For more information about the use of insulation overlays in a Water-shedding Roof System, consult the specific roof system
    1 KB (185 words) - 14:15, 27 July 2021
  • Insulation (Water-shedding Systems)
    ===Heat-resistant Insulation=== {{Template:Materials - Insulation (Polyisocyanurate)}}
    2 KB (251 words) - 14:13, 27 July 2021
  • Insulation (Grade-level Waterproofing Systems)
    {{Template:Materials - Insulation (XPS)}}
    485 bytes (56 words) - 14:10, 27 July 2021
  • SBS Mechanical Equipment Curb
    ...oof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: Required when insulation is too thin to span flutes of steel decking or when required as thermal bar ...Standard#PART_7|'''Insulation''']]: Mechanically fastened. See available insulation products in the[[Division C| Accepted Materials]] Division of this ''Manual
    4 KB (607 words) - 18:19, 27 October 2023
  • SBS 2-Part Retrofit Flashing (Cable Penetration)
    ;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers, and secured in accordance w ;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of '''Part 8''' in the '''''RoofS
    4 KB (630 words) - 18:16, 27 October 2023
  • SBS Flanged Insert Drain (Clamping Ring)
    ...oof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: Required when insulation is too thin to span flutes of steel decking or when required as thermal bar ...Standard#PART_7|'''Insulation''']]: Mechanically fastened. See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manua
    3 KB (420 words) - 18:14, 27 October 2023
  • SBS Basic Curb
    ;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in staggered and offset layers (not illustrated), and secur ;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: Subject to the requirements of '''Part 8''' in the '''''RoofS
    3 KB (474 words) - 18:18, 27 October 2023
  • ASM 10.4.4 Ridge (Snap Seam, Notched)
    ;(2) '''Insulation Overlay Protection''': Recommended. ;(5) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMINS |'''Insulation''']]: Installed between &#8216;Z&#8217; bars or wood battens on 600 mm (24
    2 KB (291 words) - 16:27, 26 April 2019
  • ASM Roof-Wall Connection (Head-wall)
    ;(3) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Installed with offset side and end joints. ...ctural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels/ventilation material (see [http://rpm.rcabc.org/index.php?
    4 KB (540 words) - 17:25, 28 June 2022
  • ASM Cylindrical Penetration (Flexible Boot Flashing)
    ;(2) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Offset and stagger layers 300 mm (12"). ...ctural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels/ventilation material (see [http://rpm.rcabc.org/index.php?
    3 KB (432 words) - 19:00, 28 June 2022
  • ASM Cylindrical Penetration (Split Panel Flashing)
    ;(3) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Offset and stagger layers 300 mm (12"). ...ctural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels/ventilation material.
    4 KB (537 words) - 17:35, 17 March 2023
  • ASM Curb (Split Panel Flashing)
    ;(2) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Offset and stagger layers 300 mm (12"). ...ctural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels/ventilation material (see [http://rpm.rcabc.org/index.php?
    4 KB (530 words) - 20:11, 28 June 2022
  • ASM 10.4.3 Ridge (Vented)
    ...ctural Sheet Metal Roof Systems. The material must be located between the insulation and metal panels (see [http://rpm.rcabc.org/index.php?title=RoofStar_Guaran
    3 KB (430 words) - 16:23, 28 June 2022
  • ASM Membrane Gutter (Insulated Assembly)
    ;(4) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Tapered to support gutter membrane, which is tied into underlayment, ...ART_7| '''Upper insulation''']]: Tapered at lower edge to conform to lower insulation slope. All flat panels must be offset and stagger layers 300 mm (12").
    5 KB (611 words) - 18:17, 12 March 2024
  • ASM Details:E1.7.18 (Zinc Standing Seam Systems Eave & Gable Flashing)
    ...oof system specifications. In addition, approved proprietary underlayment, insulation overlays and metal panel separation sheets must be installed and comply to (2) <b>Ice Dam Protection / Insulation Overlay: </b>For slopes 2:12 to 4:12 use RGC accepted self-adhered modified
    3 KB (421 words) - 22:51, 21 December 2015
  • TPO Conventionally Insulated System (Typical)
    ...Standard#PART_5|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness or when required as a thermal barrier by design authority. ...uarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
    3 KB (383 words) - 21:38, 27 June 2022

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Retrieved from "http://rpm.rcabc.org/index.php?title=Special:Search"