Difference between revisions of "Template:PARS Membrane - SBS 2-Ply Cap"

Revision as of 20:06, 18 July 2017

How to use the table:
In the table below look for maximum wind uplift values that exceed the requirements determined through the RCI calculator;
(**NOTE**: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)

Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the **RoofStar Guarantee Program** (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);

In cases where a tested Secondary material is not accepted by the **RoofStar Guarantee Program**, look for alternates which often are published in the each report. In the absence of published alternates, locate a possible alternate in the **Accepted Materials** section of this Manual. If you are unsure about compatibility, contact the **RCABC**.
Manufacturer	Product Name	Number of Tested Systems (per report)	kPa (Low)	kPa (High)	Psf (Low)	Psf (High)	Deck Type	Downloadable Test Report	Test Facility	Test Facility Report No.
Firestone Building Products	SBS Torch	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS FR Torch	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS Premium	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Firestone Building Products	SBS Premium FR Torch	1 Tested System	----	-2.10	----	-45.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU281261
Siplast	Paradiene 30 TG	1 Tested System 1 Tested System 1 Tested System 1 Tested System 1 Tested System	---- ---- ---- ---- ----	-1.90 -1.80 -2.86 -2.90 -1.46	---- ---- ---- ---- ----	-40.00 -37.00 -60.00 -60.00 -30.00	Steel Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 6 PARS Test Report 7 PARS Test Report 8 PARS Test Report 9	Intertek exp. Service Inc. exp. Service Inc. exp. Service Inc. exp. Service Inc.	E9988.01-109-44 SIPZ-DRS-00221706-02-5100 SIPZ-DRS-00221706-01-5100 SIPZ-DRS-00215482-01-5100 SIPZ-DRS-00221706-03-5100
Siplast	Paradiene 30	1 Tested System 1 Tested System 1 Tested System 1 Tested System	---- ---- ---- ----	-1.40 -2.30 -3.35 -2.87	---- ---- ---- ----	-30.00 -46.67 -70.00 -60.00	Plywood Steel Steel Steel	PARS Test Report 2 PARS Test Report 3 PARS Test Report 4 PARS Test Report 5	Intertek	E9988.02-109-44 E9988.03-109-44 E9988.05-109-44 E9988.06-109-44
Soprema Inc.	Sopralene Stick HR GR	2 Tested Systems	-1.80	-3.00	-37.00	-62.00	Plywood	PARS Test Report 4	exp. Service Inc.	PUB-DRC303967
Soprema Inc.	Soprafix Traffic Cap 660	3 Tested Systems	-1.40	-2.80	-30.00	-58.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU305544
Soprema Inc.	Soprafix Traffic Cap FR 661	3 Tested Systems	-1.40	-2.80	-30.00	-58.00	Steel	PARS Test Report 1	exp. Service Inc.	PUB-DRU305544
Soprema Inc.	Sopralene Flam 180 GR	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00	Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	Sopralene Flam 250 GR	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00 -117.00	Steel Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5 PARS Test Report 6	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389 SOPI-DRS-00231265-08-5100
Soprema Inc.	Sopralene Mammouth GR	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00	Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	Sopraply Traffic Cap 560	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00	Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	Sopraply Traffic Cap FR 561	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00	Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389
Soprema Inc.	SopraStar Flam HD GR	3 Tested Systems 1 Tested System 4 Tested Systems 3 Tested Systems	-1.40 ---- -1.40 -2.10	-2.80 -2.90 -3.40 -5.00	-30.00 ---- -30.00 -45.00	-58.00 -60.00 -70.00 -105.00	Steel Steel Steel Steel	PARS Test Report 1 PARS Test Report 2 PARS Test Report 3 PARS Test Report 5	exp. Service Inc.	PUB-DRU305544 PUB-DRU293332 PUB-DRU304337 PUB-DRU293389

@@ Line 4: / Line 4: @@
 |+	How to use the table:
-#In the table below look for maximum <u>wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
+#In the table below look for <u>maximum wind uplift values that exceed</u> the requirements determined through the RCI calculator;<p>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)</p>
 #Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
 #In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates, locate a possible alternate in the [http://rpm.rcabc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual.  If you are unsure about compatibility, contact the [mailto:guarantees@rcabc.org '''RCABC'''].