Revision as of 21:31, 6 July 2020
| Notice to the Reader:
The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.
|
Manufacturer: Soprema Inc.
- Accepted for RoofStar Guarantee Program
- Date TBA
- Product Summary
- Soprasmart ISO HD 180 is a high density composite panel composed of a non-woven polyester reinforced membrane with a thermofusible/sanded surface, laminated on an HD (100psi) polyisocyanurate insulation panel. The base sheet is offset from the board on two adjacent edges (1 inch on one end and 3-1/2 inches on 1 side) to provide shiplap; other edges are square. To ensure a secure installation, the side lap is made with a patented DUO-SELVEDGE unique to Soprema (60% self-adhesive and 40% thermofusible). Its self-adhesive component protects combustible surfaces and its thermofusible properties provide an efficient seal. End laps can be aligned then sealed by heat welding a minimum 12" wide membrane reinforcing strip centered over the end lap. Soprasmart ISO HD 180 can be mechanically fastened or adhered with Duotack adhesive.
- Soprasmart ISO HD 180 can be used for the following applications:
- an overlay board and base sheet on all types of insulation
- a recovery board and base sheet on existing roofing
- an overlay board and base sheet on wood decks
- PROPERTIES:
|
Standards |
Details |
| Board Dimensions |
- |
0.91m x 2.44m (3 x 8 ft) |
| Total Thickness (mm) |
- |
15 mm (19/32") |
| Membrane Reinforcement |
- |
non-woven polyester |
| Total Weight |
- |
4.26kg/m2 (0.87lb/sf) |
| Top Surface |
- |
film or sand |
| Underface |
- |
Polyisocyanurate HD |
| Membrane Thickness |
- |
2.2mm (86.6 mils) |
| Breaking Strength, MD / XD |
37GP56M |
17.0 / 12.5 kN/m |
| Ultimate Elongation, MD / XD |
37GP56M |
60/65% |
| Tear Strength |
ASTM D5601 |
60N |
| Cold Bending - initial |
37GP56M |
-30 |
| Cold Bending -90 days at 70°C |
37GP56M |
-30 |
| Board Thickness |
- |
12.7 mm (1/2") |
| Thermal Resistance (R-Value) at 24C (75F) |
- |
ASTM C518 R2.5 |
| Compressive Strength |
ASTM D1621 |
>689kPa(100psi) |
| Dimensional Stability |
ASTM D2126 |
<0.5% linear change (7 day) |
| Water Absorption |
ASTM C209 |
<1% by volume |
| Resistance to Mold |
ASTM D3273 |
Passed (10) |
| Service Temperature |
- |
<127C (260F) |
| All values are nominal |
|
|
Soprema Inc. may modify the composition of its products without prior notice. Consequently orders will be filled according to the latest specification.
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
