Difference between revisions of "Materials:OptiMax FR Mineral"

Revision as of 14:26, 27 October 2020

Notice to the Reader: The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance Manufacturer http://www.garlandcanada.ca Accepted for the RoofStar Guarantee Program October 2020 Accepted for application in Waterproofing Systems (roofs) Product Summary OptiMax membranes are fiberglass reinforced asphalt-based membranes modified with a specially-designed polyurethane resin designed to extend roof longevity. manufactured to be puncture and fatigue resistant, and are designed to be the waterproofing and reinforcement layer in a modified bitumen roofing system. designed for use as the top component in a roofing system where superior performance is required. can be used in conjunction with Garland modified base sheets depending on the adhesive used. can be used as the top ply in a two-ply flashing system. Specifications are available for either hot- or cold-applied two-ply systems. (adapted from the Technical Data Sheet)

Click below for the Technical Data Sheet.

@@ Line 18: / Line 18: @@
 :*designed for use as the top component in a roofing system where superior performance is required.
 :*can be used in conjunction with Garland  modified base sheets depending on the adhesive used.
+:*can be used as the top ply in a two-ply flashing system.
 :Specifications are available for either hot- or cold-applied two-ply systems.
-:OptiMax membranes can be used as the top ply in a two-ply flashing system. They can also be used to repair splits, cracks, and other deteriorated areas in existing asphalt based roofing systems.
 <br>
 :(adapted from the Technical Data Sheet)