Difference between revisions of "Materials:EverGuard Freedom HW TPO"

Jump to: navigation, search

Difference between revisions of "Materials:EverGuard Freedom HW TPO"

 
(4 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
−
| '''Manufacturer''': [http://www.gaf.com/ '''www.gaf.com''']
+
| '''Manufacturer''': [https://www.gaf.ca/en-ca '''GAF Materials Canada ULC''']
 
;:  
 
;:  
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002
 
;Accepted for '''''RoofStar Guarantee Program''''': since 2002
Line 19: Line 19:
 
:EverGuard® Freedom TPO HW Roof Systems utilize 0.45" (1.1 mm) thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane has factory applied adhesive and release film on the bottom side (self-adhered). Membrane seams are 6" wide (150 mm) and are heat welded.  '''EverGuard® Freedom™ TPO HW''' is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: white and earth tone tan. Freedom™ membranes combine EverGuard’s proven TPO technology with an added engineered adhesive pre-applied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3" heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
 
:EverGuard® Freedom TPO HW Roof Systems utilize 0.45" (1.1 mm) thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane has factory applied adhesive and release film on the bottom side (self-adhered). Membrane seams are 6" wide (150 mm) and are heat welded.  '''EverGuard® Freedom™ TPO HW''' is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: white and earth tone tan. Freedom™ membranes combine EverGuard’s proven TPO technology with an added engineered adhesive pre-applied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3" heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
 
;:
 
;:
−
;[[GAF TPO Membrane Installation Guidelines|Installation Guidelines]]
 
 
|}
 
|}
  
Line 34: Line 33:
  
  
−
[[Main Page|Home]]
+
[[RCABC_Roofing_Practices_Manual | Home]]

Latest revision as of 18:53, 6 January 2026

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: GAF Materials Canada ULC
Accepted for RoofStar Guarantee Program
since 2002
Product Summary
GAF EverGuard® TPO thermoplastic polyolefin single-ply membrane systems have been engineered to provide premium performance at a very cost-effective price. Strong, flexible, durable EverGuard® TPO membrane is suitable for use in fully adhered, mechanically attached, and ballasted single-ply roof systems.
EverGuard® TSR roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane is supplied in 5 foot and 10 foot widths and is available in white, gray or tan.
EverGuard® TFB roof systems utilize either a 0.45", .060", or.080" thick polyester scrim-reinforced thermoplastic polyolefin membrane with polyester fleece backing. The membrane is supplied in a 5 foot and 10 foot widths and is available in white, gray, or tan.
EverGuard® Freedom TPO HW Roof Systems utilize 0.45" (1.1 mm) thick polyester scrim-reinforced thermoplastic polyolefin membrane. The membrane has factory applied adhesive and release film on the bottom side (self-adhered). Membrane seams are 6" wide (150 mm) and are heat welded. EverGuard® Freedom™ TPO HW is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: white and earth tone tan. Freedom™ membranes combine EverGuard’s proven TPO technology with an added engineered adhesive pre-applied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3" heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
Click below for the Technical Data Sheet.
Technical Data Sheet


Back to Accepted Materials


Home

Retrieved from "http://rpm.rcabc.org/index.php?title=Materials:EverGuard_Freedom_HW_TPO&oldid=53103"