Manufacturers:Johns Manville Corporation

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.

Manufacturer: Johns Manville Corporation Website www.jm.com Contact Address See the current Membership list and contact information at www.rcabc.org

1 Roof Deck Insulation

Polyisocyanurate Foam

ENRGY 3 CGF Insulation

Perlitic Insulation

Fesco Board

2 Insulation Overlay Board

Retrofit Board

Invinsa Roof Board

3 BUR Felts

Glass-fibre Felts

Glasply (IV) (awaiting TDS)

Glasply Premier (VI) (awaiting TDS)

Polyester Felts

Glasbase Plus (awaiting TDS)

Permaply 28 (awaiting TDS)

4 BUR Systems

Built Up Roofing Systems (awaiting TDS)

5 Liquid Membranes

PermaFlash (awaiting TDS)

6 EPDM & Elastomeric Membranes

Installation Guidelines

JM 1.11 mm non-reinforced EPDM Membrane (awaiting TDS)

JM 1.52 mm non-reinforced EPDM Membrane (awaiting TDS)

JM 2.28 mm non-reinforced EPDM Membrane (awaiting TDS)

7 TPO & PVC Membranes

TPO

JM TPO-45 (awaiting TDS)

JM TPO-60 (awaiting TDS)

JM TPO-80 (awaiting TDS)

PVC

JM PVC Fleece Backed (50 mil.)

FleeceBACK 115 mil (060) TPO Membrane (awaiting TDS)

FleeceBACK 135 mil (080) TPO Membrane (awaiting TDS)

AFX (hot mopped) 120 mil (045) TPO Membrane (awaiting TDS)

AFX (hot mopped) 135 mil (060) TPO Membrane (awaiting TDS)

AFX (hot mopped) 155 mil (080) TPO Membrane (awaiting TDS)

JM PVC SD Plus (80) (awaiting TDS)

JM PVC Detail Membrane (awaiting TDS)

---

Back to Materials by Manufacturer/Distributor/Certifying Authority

Back to Accepted Materials

Home