Difference between revisions of "Materials:(G&G) New Tech Machinery SSQ II"
Difference between revisions of "Materials:(G&G) New Tech Machinery SSQ II"
(Created page with "__NOTOC__ __NONUMBEREDHEADINGS__ {{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}} <big>...") |
(→SYSTEM DESCRIPTION) |
||
| Line 36: | Line 36: | ||
##Fasteners used to attach panel clips to steel must be {{hilite | No. 10-16 by 25 mm (1") || 2024-October-25 }} long self-drilling, self-tapping pancake head plates steel screws. Use two fasteners per panel clip, inserted into panel clip guide holes. | ##Fasteners used to attach panel clips to steel must be {{hilite | No. 10-16 by 25 mm (1") || 2024-October-25 }} long self-drilling, self-tapping pancake head plates steel screws. Use two fasteners per panel clip, inserted into panel clip guide holes. | ||
##Fasteners used to attach panel clips to plywood must be {{hilite | No. 10-16 by 25 mm (1") || 2024-October-25 }} long pancake head plated steel screws for wood. Use two fasteners per clip, inserted into panel guide holes. | ##Fasteners used to attach panel clips to plywood must be {{hilite | No. 10-16 by 25 mm (1") || 2024-October-25 }} long pancake head plated steel screws for wood. Use two fasteners per clip, inserted into panel guide holes. | ||
| − | #'''Panel Clips''': {{hilite | One piece assembly -------- wide, -------- high || 2024-October-25 }}, manufactured by New Tech Machinery (or approved equal). {{hilite | Minimum thickness 0.022 in. (No. 22 MSG). Clips spaced maximum 600 mm (24") O.C. || 2024-October-25 }} | + | #'''Panel Clips''': {{hilite | One piece assembly ----(mm/in.)---- wide, ----(mm/in.)---- high || 2024-October-25 }}, manufactured by New Tech Machinery (or approved equal). {{hilite | Minimum thickness 0.022 in. (No. 22 MSG). Clips spaced maximum 600 mm (24") O.C. || 2024-October-25 }} |
#'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems]. | #'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems]. | ||
Revision as of 15:03, 26 October 2023
Division C - Accepted Materials
New Tech Machinery SSQ II
by G&G Roofing Ltd.
| The metal panel listed and described below is accepted for use in the RoofStar Guarantee Program. |
The roofing assembly / material information published below and in the RCABC Roofing Practices Manual DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority. For more information about this product or system, consult the manufacturer. |
OVERVIEW
The New Tech SSQ II standing seam panel is formed with an on-site/in shop continuous metal roofing panel roll forming machine (New Tech Machinery SSQ2U). This machine produces a standing seam panel with a seam height of 38 mm (1-1/2") or 50.8 mm (2") and profiles can vary from 305mm (12") wide up to 510 mm (20") wide.
On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to 300'.
SYSTEM DESCRIPTION
- General: The New Tech SSQ II standing seam panel is secured with concealed fastener. The maximum spacing of screws in the built in 'nailing strip' is 635mm (24")
- Range of application: Installed on wood or steel sloped roofs, in commercial, institutional, industrial and residential construction. For re-roofing or new construction.
- Panel Attachment: Fastening is site specific, engineer must confirm fixing specifications.
- Fasteners (Screws):
- Fasteners used to attach panel clips to steel must be No. 10-16 by 25 mm (1") long self-drilling, self-tapping pancake head plates steel screws. Use two fasteners per panel clip, inserted into panel clip guide holes.
- Fasteners used to attach panel clips to plywood must be No. 10-16 by 25 mm (1") long pancake head plated steel screws for wood. Use two fasteners per clip, inserted into panel guide holes.
- Panel Clips: One piece assembly ----(mm/in.)---- wide, ----(mm/in.)---- high, manufactured by New Tech Machinery (or approved equal). Minimum thickness 0.022 in. (No. 22 MSG). Clips spaced maximum 600 mm (24") O.C.
- Deck Requirements: in keeping with the Standard for Architectural Sheet Metal (ASM) Systems.
PROFILE
N/A
TECHNICAL DATA SHEET
N/A
SITE CONDITIONS
Minimum roof slope is 1:6 (2" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" in 12").
PERFORMANCE REQUIREMENTS
- Wind Uplift Standards: Engineered designs to resist wind uplift may refer to the British Columbia Building Code, Div. B, Appendix C, Table C-2 which lists various types of loads, including wind loads, for specific reference locations throughout the province. See also Guides and Notes (Wind Resistance) for a simplified calculation procedure. Regardless of the resources indicated here, the Design Authority is responsible to perform accurate wind load calculations and specify securement requirements.
- Materials:RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the standards published in the Standard for Architectural Sheet Metal (ASM) Systems.