Manufacturers:Johns Manville Corporation

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.

Manufacturer: Johns Manville Corporation Website www.jm.com Contact Address See the current Membership list and contact information at www.rcabc.org

Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category

---

Low-slope Membrane Roof Materials

Roof Deck Insulation

Polyisocyanurate Foam

ENRGY 3 CGF Insulation (Flat and Tapered)

Perlitic Insulation

Fesco Board

Insulation Overlay Board

Composite Overlays

Retrofit Board

Invinsa Roof Board

BUR Felts

Glass-fibre Felts

Glasply (IV)

Glasply Premier (VI)

Glasbase Plus

Permaply 28

BUR Systems

Built Up Roofing Systems

Liquid Membrane Flashing

Two-part Reinforced Liquid Membrane Flashing

PermaFlash

---

...

EPDM & Elastomeric Membranes

EPDM Roofing Installation Guidelines

JM 1.11 mm (45 mil) non-reinforced EPDM Membrane

JM 1.52 mm (60 mil) non-reinforced EPDM Membrane

JM 2.28 mm (90 mil) non-reinforced EPDM Membrane

JM 1.11 mm (45 mil) reinforced EPDM Membrane

JM 1.52 mm (60 mil) reinforced EPDM Membrane

TPO & PVC Membranes

TPO

TPO Roofing Installation Guidelines

JM TPO-45

JM TPO-60

JM TPO-80

PVC

PVC Roofing Installation Guidelines

JM PVC (50 mil.)

JM PVC (60 mil.)

JM PVC (80 mil.)

JM PVC Fleece Backed (50 mil.)

JM PVC Fleece Backed (60 mil.)

JM PVC Fleece Backed (80 mil.)

---

Waterproofing Materials

Liquid Membrane Flashing

Two-part Reinforced Liquid Membrane Flashing

PermaFlash

---

Back to Materials by Manufacturer/Distributor/Certifying Authority

Back to Accepted Materials

Home