Materials:New Tech FF 100 Metal Panel (Precision)

Notice to the Reader: The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance Manufacturer Precision Metals Ltd. Accepted for the RoofStar Guarantee Program October 17, 2021 Accepted for application in Water-shedding Systems (ASM only) Product Summary Snap-lock standing seam metal panel that is fastened along one side (on the flange). Each panel is produced with proprietary double-end cut-outs to facilitate versatile installation and save time in the field. Gauge (accepted): 24 Minimum panel width: 300 mm (12") Maximum panel width: 600 mm (24") Seam height: 23.4 mm (15/16") Stiffeners: Optional Finishes: SMP or PVDF Conditions and Limitations Refer to the Standard for Architectural Sheet Metal (ASM) Roof Systems for limitations concerning flange-fastened snap-lock panels.

Click below for the Technical Data Sheet.