Template:CSA A123.21 Wind Uplift Test Reports - PARS

Jump to: navigation, search

Template:CSA A123.21 Wind Uplift Test Reports - PARS

Revision as of 17:53, 19 April 2017 by James Klassen (talk | contribs)
USING TESTED ASSEMBLY REPORTS

The tables and products shown below provide basic material data related to roof assemblies tested for their performance in modulating and high winds, using the test method found in CSA A123.21. They also provide links to more information about the materials, including manufacturers' published Technical Data sheets. The reader is advised to use this information in conjunction with other RoofStar-accepted Materials, and with reference to roof system requirements derived from from appropriate wind uplift calculations (see the Wind-RCI calculator and reference notes and requirements outlined in Securing the Roof Assembly; also refer to the BC Building Code, Part 4 and Part 5).

The information on this page is not intended for use as a comparison of material performance or quality. Nor should this information be construed as an endorsement of the suitability of any given material for a particular application. It is the sole responsibility of the Design Authority to assess the performance capability and material suitability for specific design requirements.


Expand
To view materials in any section listed below, click on the EXPAND button located at the right hand side of this page

Membranes

Expand
SBS Membrane Systems
Base Membranes
Expand
Cap Membranes
EPDM Membrane Systems
EPDM/Elastomeric Membranes (under development)
TPO/PVC Membrane Systems
TPO (under development)
PVC (under development)