Accepted Materials - SBS Modified Bitumen Membrane Systems
Accepted Materials - SBS Modified Bitumen Membrane Systems
Revision as of 18:27, 22 November 2019 by James Klassen (talk | contribs) (→Drains, Penetration Flashings and Related Accessories)
| To view materials in any section listed below, click on the EXPAND button located at the right hand side of this page |
1 Air and Vapour Control
- The RCABC does not list air or vapour barriers in the Accepted Materials section of this Manual, as their performance is not guaranteed by the RoofStar Guarantee Program. For more about air and vapour barriers and specific requirements for the RoofStar Guarantee Program, select any of the Low Slope Membrane Roof Systems. This cross-reference is listed for information only.
- Wall Overlays TBA
3 Insulation
Expand
- Composite Board Insulation
Expand
- XPS (Extruded Expanded Polystyrene Foam)
Expand
- EPS (Expanded Polystyrene Foam)
Expand
- Polyisocyanurate Foam
Expand
- Fibreboard Roof Insulation
Expand
- Perlitic Insulation
Expand
- Mineral Fibre Roof Insulation
Expand
- Lightweight Insulating Concrete
4 Insulation Overlays
Expand
- Fibreboard Overlays
Expand
- Asphaltic Overlays
Expand
- Composite Overlays
5 Membranes
Expand
- Base Membranes
Expand
- Cap Membranes
Expand
- Single-Ply Membranes
6 Liquid Membrane Flashing
7 Filter Mats & Ballast
- Click on the heading above to find filter mat and ballast requirements when designing or constructing a Protected or Modified Protected Membrane Roof.
9 Accessories
| An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the waterproofing or water-shedding capabilities of the system.
Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers. |
These membranes are not Accepted for use in the primary waterproofing system, but may be use as for an ancillary function - for example, as protective membranes (a 'sacrificial' cap membrane).
| Manufacturer | Product Name | Description | Application Method | Suitability |
|---|---|---|---|---|
| Polyglass USA, Inc. | Polyfresko G SA | APP membrane | Self-adhering | Walkways, accessory surfaces |
| Polyglass USA, Inc. | Polyfresko G FR | APP membrane (fire resistant) | Heat-welding | Walkways, accessory surfaces |
| Polyglass USA, Inc. | Polyfresko G | APP membrane | Heat-welding, hot asphalt, cold processing | Walkways, accessory surfaces |
| Polyglass USA, Inc. | Polyflex G FR | APP membrane (fire resistant) | Heat-welding | Walkways, accessory surfaces |
| Polyglass USA, Inc. | Polyflex G HP | APP membrane | Heat-welding, hot asphalt, cold processing | Walkways, accessory surfaces |
Coatings are not a waterproofing product, but rather enhance solar reflectivity or other properties of a membrane. The inclusion of these materials, although acceptable under the RoofStar Guarantee Program, is not part of the Guarantee.
| Manufacturer | Product Name | Description | Application | Applicator Training |
|---|---|---|---|---|
| Soprema Inc. | R-Nova Plus | polyurethane/acrylic-based waterproofing liquid membrane/coating | See Product Details | Consult Manufacturer |
| Soprema Inc. | R-Nova Plus Mastic | polyurethane/acrylic-based waterproofing liquid mastic | See Product Details | Consult Manufacturer |
| Soprema Inc. | R-Nova Plus Matrix | polyurethane/acrylic-based waterproofing liquid paste | See Product Details | Consult Manufacturer |
| Manufacturer | Product Name | Type | Size |
|---|---|---|---|
| Soprema Inc. | Soprajoint Plus 20 | expansion joint for low-slope membrane systems | ‒ |
| Soprema Inc. | Soprajoint Plus 40 | expansion joint for low-slope membrane systems | ‒ |
| Soprema Inc. | Soprajoint Plus 75 | expansion joint for low-slope membrane systems | ‒ |
| Soprema Inc. | Soprajoint Plus 125 | expansion joint for low-slope membrane systems | ‒ |