Template:Materials - Eave Protection & Underlayment (ASM)
Template:Materials - Eave Protection & Underlayment (ASM)
The problems resulting from the presence of condensation represent one of the major causes of damage to the structure and fabric of old and modern buildings alike. They are, therefore, of great importance to the specifier in his design role. The increased use of insulation and modern roof construction methods have created further major condensation risks within the roof void.
The specifier must ensure that the risk of condensation is minimised by ensuring the correct design, suitable ventilation in accordance with the B.C. Building Code, and specification of the most suitable underlay.
RoofStar-guaranteed metal roofing systems require a suitable underlay to ensure that any moisture produced by condensation is not introduced into the roofing system components or the structure of the building. Modified bituminous membranes that are not arranged under insulation must have a high softening point bitumen with a minimum flow temperature of 87.7°C (190°F) to prevent material displacement from heat transfer through metal panels during high temperature days. (See UNDERLAYMENT - Eave and Detail Protection (ASM Roof Systems)). All accepted modified bituminous self-adhesive membranes listed exceed a minimum flow temperature of 87.7°C (190°F.).
Accepted No. 30 Asphalt felt or RoofStar-accepted proprietary synthetic underlayments that meet or exceed the CSA A123.3 standards for No. 30 Asphalt Felt are acceptable for use on uninsulated wood decks sloped over 4" in 12". Manufacturer's limitations are to be followed.
For RoofStar-accepted No. 30 asphalt felts refer to BUR Felts in the Accepted Materials section of this Manual.
Manufacturer | Product Name | Product Type | Top Surface | Separation Layer |
Eaves & Valleys |
Under- layment |
Nominal Thickness mm (mil) |
Application Method |
---|
Click up/down arrows to sort | ||||||||
---|---|---|---|---|---|---|---|---|
Various | No. 30 Asphalt Felt | Felt underlayment | Non-woven Felt | X | X | ✔ | ‒ | Nail-applied |
Building Products of Canada Corp. | Gripgard | SBS-modified Bituminous | ‒ | X | ✔ | ✔ | ‒ | Self-adhering |
CertainTeed LLC | DiamondDeck | Polymeric | Synthetic Polymer | ✔ | X | ✔ | N/A | Nail-applied |
Firestone Building Products | Clad-Gard SA | SBS-modified Bituminous | Woven Polyethylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Firestone Building Products | Clad-Gard MA | SBS-modified Bituminous | ‒ | X | ✔ | ✔ | N/A | Self-adhering |
FT Synthetics | PLATINUM | Polymeric | Polyolefin | ✔ | X | ✔ | 0.50 (20) | Nail-applied |
FT Synthetics | GOLD | Polymeric | Polyolefin | ✔ | X | ✔ | 0.40 (16) | Nail-applied |
FT Synthetics | SILVER | Polymeric | Polyolefin | ✔ | X | ✔ | 0.30 (12) | Nail-applied |
FT Synthetics | PLATINUM HT-SA | Polymeric | GRIPSPOT TM | ✔ | ✔ | ✔ | 1.04 (41) | Self-adhering |
FT Synthetics | HYDRA | Polymeric | GRIPSPOT TM | ✔ | X | ✔ | 0.76 (30) | Nail-applied |
FT Synthetics | KOMODO BSA | Polymeric | GRIPSPOT TM | ✔ | ✔ | ✔ | 1.04 (41) | Self-adhering |
FT Synthetics | Cobalt Ultra | Polymeric | GRIPSPOT TM | ✔ | ✔ | ✔ | 1.04 (41) | Self-adhering |
GAF Canada ULC | Stormguard | SBS-modified Bituminous | ‒ | X | ✔ | ✔ | 1.02 (40) | Self-adhering |
GAF Canada ULC | Deck Armor | Polymeric | ‒ | ✔ | X | X | ‒ | Nail-applied |
Garland Canada Inc. | R-Mer Seal | polymer/rubberized asphalt adhesive | Slip-resist. Polymer | ✔ | ✔ | ✔ | 1.14 (45) | Self-adhering |
HAL Industries Inc. | “Super” Tilemate G100 FW | SBS-modified Bituminous | Woven Polypropylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Henry Company Canada | Blueskin PE 200 HT | SBS-modified Bituminous | Polyethylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Henry Company Canada | Blueskin RF 200 | SBS-modified Bituminous | Slip-resistant Film | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Henry Company Canada | Eaveguard | SBS-modified Bituminous | Sanded | X | ✔ | ✔ | 1.30 (50) | Self-adhering |
IKO Industries Ltd. | Stormshield Ice and Water Protector | SBS-modified Bituminous | Sanded | ✔ | ✔ | ✔ | 1.08 (43) | Self-adhering |
IKO Industries Ltd. | 44 Stormshield Ice and Water Protector | SBS-modified Bituminous | Sanded | ✔ | ✔ | ✔ | 1.08 (43) | Self-adhering |
IKO Industries Ltd. | Armourgard Ice and Water Protector | SBS-modified Bituminous | Sanded | ✔ | ✔ | ✔ | 1.4 (53) | Self-adhering |
Malarkey Roofing Products | Right Start™ UDL | SBS-modified Bituminous | Sanded | X | X | ✔ | 1.40 (55) | Nail-applied |
Malarkey Roofing Products | Arctic Seal Ice & Water Guard | SBS-modified Bituminous | Sanded | X | X | ✔ | 1.52 (60) | Self-adhering |
Malarkey Roofing Products | Secure Start Plus | Polymeric | Slip-resist. polymer | ✔ | X | ✔ | ‒ | Nail-applied |
Malarkey Roofing Products | Secure Start SG | Polymeric | Smooth polymeric | ✔ | X | ✔ | ‒ | Nail-applied |
Malarkey Roofing Products | Secure Start Permeable | Polymeric | Polymeric | ✔ | X | ✔ | ‒ | Nail-applied |
Owens Corning Canada LP | Titanium UDL 25 | Polymeric | Synthetic (not stated) | ✔ | X | ✔ | 0.38 (15) | Nail-applied |
Owens Corning Canada LP | Titanium UDL 30 | Polymeric | Synthetic (not stated) | ✔ | X | ✔ | 0.63 (25) | Nail-applied |
Owens Corning Canada LP | Titanium UDL 50 | Polymeric | Synthetic (not stated) | ✔ | X | ✔ | 0.75 (30) | Nail-applied |
Owens Corning Canada LP | Titanium PSU 30 | SBS-modified Bituminous | Synthetic Polymer | ✔ | ✔ | ✔ | 1.10 (45) | Self-adhering |
Owens Corning Canada LP | RhinoRoof U20 | Polymeric | Not Stated | X | X | ✔ | 0.18 (7) | Nail-applied |
Polyglass USA, Inc. | Polystick MTS | Proprietary Compound | Fibreglass mat | X | ✔ | ✔ | 1.50 (60) | Self-adhering |
Protecto Wrap Company | Jiffy Seal Ice and Water Guard HT | SBS-modified Bituminous | Woven polyolefin | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Protecto Wrap Company | Jiffy Seal Butyl Ice and Water Guard HT | SBS-modified Bituminous | Woven polyolefin | ✔ | ✔ | ✔ | 0.75 (30) | Self-adhering |
Sentry Building Innovations | Roofnado AnchorDeck | Polymeric | Not Stated | ✔ | X | ✔ | ‒ | Nail-applied |
Sentry Building Innovations | Roofnado LapLock PSU (HT) | Polymeric | Not Stated | ✔ | X | ✔ | ‒ | Nail-applied |
Sentry Building Innovations | StormTread XW | Polymeric | Not Stated | ✔ | X | ✔ | ‒ | Nail-applied |
Siplast | Paradiene 20 EG SA | SBS-modified Bituminous | Not Stated | X | ✔ | ✔ | 3.00 (118) | Self-adhering |
Soprema Inc. | Lastobond 195 | SBS-modified Bituminous | Sanded | X | ✔ | ✔ | 1.60 (63) | Self-adhering |
Soprema Inc. | Lastobond 240 | SBS-modified Bituminous | Sanded | X | ✔ | ✔ | 1.60 (63) | Self-adhering |
Soprema Inc. | Lastobond Shield | SBS-modified Bituminous | Woven polyethylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Soprema Inc. | Lastobond Shield HT | SBS-modified Bituminous | Woven polyethylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Soprema Inc. | Sopraseal Stick 1100 T | SBS-modified Bituminous | Woven polyethylene | ✔ | ✔ | ✔ | 1.00 (40) | Self-adhering |
Soprema Inc. | Sopralene Stick HR 40 | SBS-modified Bituminous | Sanded | X | ✔ | ✔ | 3.00 (120) | Self-adhering |
Soprema Inc. | Lastobond Stick VP | SBS-modified Bituminous | Trilaminar polypropylene | ✔ | X | X | 0.6 (24) | Self-adhering |