| Notice to the Reader:
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
Manufacturer and Acceptance
- Manufacturer
- Precision Metals Ltd.
- Accepted for the RoofStar Guarantee Program
- October 17, 2021
- Accepted for application in
- Water-shedding Systems (ASM only)
- Product Summary
- Snap-lock standing seam metal panel that is fastened along one side (on the flange). Each panel is produced with proprietary double-end cut-outs to facilitate versatile installation and save time in the field.
- Machine: New Tech SSQ II (roll-forming machine)
- Gauge (accepted): 24
- Minimum panel width: 300 mm (12")
- Maximum panel width: 600 mm (24")
- Seam height: 23.4 mm (15/16")
- Stiffeners: Optional
- Finishes: SMP or PVDF
- Conditions and Limitations
- Refer to the Standard for Architectural Sheet Metal (ASM) Roof Systems for limitations concerning flange-fastened snap-lock panels.
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
