Materials:Deckmate (Type 2)

Jump to: navigation, search

Materials:Deckmate (Type 2)

Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Dupont Specialty Products Division - Safety and Construction
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary

DECKMATE insulation is specifically designed to provide high quality, economical insulation for all conventional roofs, with single-ply, 2-ply or 4-ply roof membranes.

DECKMATE roof insulation is an extruded, expanded Type 2 CAN / ULC-S701-97 / CAN / CGSB-51.20-M87 polystyrene foam. It has excellent insulating characteristics (RSI 0.87 per 25 mm (R 5.0 per inch) of thickness), good compressive strength (110 kPa or 16 psi), and low water absorption (less than 1%).

DECKMATE has a smooth, high-density skin, and a closed-cell foam structure with shiplap edges on four sides. It is uniform in thickness and consistency and is easy to cut and handle. When installing, DECKMATE can be either loosely applied or attached to the substrate with mechanical fasteners, hot asphalt or adhesive. Board size is 600 mm x 2400 mm (2' x 8'), in thickness ranging from 25 mm to 100 mm (1" to 4").

Click below for the Technical Data Sheet (TBA).
Pdf.png



Back to Accepted Materials


Home