Template:CSA A123.21 Wind Uplift Test Reports - PARS

Jump to: navigation, search

Template:CSA A123.21 Wind Uplift Test Reports - PARS

(Redirected from Template:CSA A123.21 - PARS)
USING TESTED ASSEMBLY REPORTS

The tables and products shown below provide basic material data related to roof assemblies tested for their performance in modulating and high winds, using the test method found in CSA A123.21. They also provide links to more information about the materials, including manufacturers' published Technical Data sheets. The reader is advised to use this information in conjunction with other RoofStar-accepted Materials, and with reference to roof system requirements derived from from appropriate wind uplift calculations (see the Wind-RCI calculator and reference notes and requirements outlined in Securing the Roof Assembly; also refer to the BC Building Code, Part 4 and Part 5).

The information on this page is not intended for use as a comparison of material performance or quality. Nor should this information be construed as an endorsement of the suitability of any given material for a particular application. It is the sole responsibility of the Design Authority to assess the performance capability and material suitability for specific design requirements.


Roof Assemblies are classified according to three different approaches to securement: MARS (Mechanically Attached Roof Systems), PARS (Partially Adhered Roof Systems), and AARS (Adhesive Applied Roof Systems). For a full explanation of these and other key details pertinent to an understanding of the test reports, visit Securing the Roof Assembly.

In the tables below, the following definitions apply:

ASSEMBLIES are represented by the downloadable reports linked in the far right column of each table. Assemblies are defined in this Manual as the arrangement of various and distinct roofing materials in combination with the supporting deck structure. Therefore, a Tested Assembly refers to both the roof system materials and the type of supporting deck structure to which they are secured and then tested in a controlled environment, in accordance with the CSA A123.21 test method. Some reports provide guidance for other deck types. The reader is advised to consult each report for optional assemblies and the testing authority's remarks concerning resistance to Specified Wind Loads (refer to the BC Building Code, Part 4).
SYSTEMS used in the tables below refers to the system of securement - that is, the pattern or spacing of fasteners or adhesive ribbons used to achieve the listed Dynamic Uplift Resistance (DUR) values (NOTE: the term System used elsewhere in the RPM denotes the combination of roof materials, excluding the supporting deck structure. The two uses of system should not be confused). Some Assemblies have been tested with a variety of securement systems, others with only one. For example, one Assembly may be tested with three different fastener spacing arrangements (securement systems), indicated both by the row spacing and by the fastener spacing. In that case, the tables show that a material has been tested with three different systems of securement. You will see notations in the third column of each table indicating how many securement systems have been tested for a particular material. The associated downloadable report will be found on the same line, in the far right column. The report name is a hyperlink to the report document.
Some of the reports will include diagrams or photographs illustrating the tested patterns. Click on a report link for a complete description of the test results and all other materials tested in the assembly (NOTE: Most reports are under 2 MB in size but some are considerably larger and may exceed your server capacity)

How to Use the Tables

  1. Begin by determining the Specified Wind Loads of the roof using the online calculator available through Wind-RCI (click here for a sample report). For roofs that do not conform to the parameters of the Wind-RCI online calculator, the Specified Wind Loads will have to be calculated by a qualified professional. Refer to the BC Building Code, Part 4 for guidance and specific formulae;
  2. familiarize yourself with the three roof zones and their respective Specified Wind Loads. The Corner Zone represents the highest anticipated Specified Wind Loads for the roof; consequently, you should use the Corner Zone value for selecting an appropriate Tested Assembly. The Specified Wind Loads for the Edge and Field zones may be considered later;
  3. The current page you are on displays materials and tested assembly reports for one method, or system, by which the roof will be fastened together. To switch to another type of system, click on one of the links below:
    • MARS Systems (mechanically fastened);
    • AARS Systems (adhered);
    • PARS Systems (a combination of adhered and mechanically fastened).

      Note that the method of attachment may be determined by the type of supporting deck structure.

  4. Expand the table for the membrane type and look for maximum wind uplift resistance values that exceed the requirements determined through the RCI calculator or professional calculations using the formulae in the BCBC, Part 4;

    (NOTE: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required Safety Factor of 1.5 - these are called the DUR or Dynamic Uplift Resistance values)

  5. Open the report for the Tested Assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the RoofStar Guarantee Program (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
  6. In cases where a tested Secondary material is not accepted by the RoofStar Guarantee Program, look for alternates which often are published in the each report. In the absence of published alternates, locate a possible alternate in the Accepted Materials section of this Manual. If you are unsure about compatibility, contact the manufacturer of the Tested Assembly, or contact the RCABC.

1 SBS Membrane Systems

  1. The tables on the adjacent tabs display data and links to Tested Assembly Reports listed by the membrane type shown on the tab. These are reports that detail the makeup and performance of roof systems tested using the CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems (latest edition). Use the maximum wind uplift values that equal or exceed the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the British Columbia Building Code, Division B, Part 4 (4.1.7 Specified Wind Loads));
    (NOTE: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
  2. Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the RoofStar Guarantee Program (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
  3. In cases where a tested Secondary material is not accepted by the RoofStar Guarantee Program, look for alternates which often are published in the each report. In the absence of published alternates, consult the manufacturer of the Tested Assembly for alternates that are accepted by the RoofStar Guarantee Program, and obtain the manufacturer's written approval.
Primary Material Secondary Materials & Deck Tested Assembly Report Data
Manufacturer Membrane Insulation
Overlay
Insulation Deck
Overlay
Deck Tested
Systems
kPa Psf Downloadable
Test Report
Test Facility Test Facility
Report No.
Low High Low High
Firestone Building Products SBS Poly Base ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS Base ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS Premium Base ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS Poly Torch Base ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products BaseGard SA ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Henry Company Canada Modified Plus NP180 Tack ---- ---- ---- Steel 1 ---- -4.67 ---- -97.50 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Polyglass USA, Inc. Elastobase ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
NEMO, etc. PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
Polyglass USA, Inc. Elastoflex S6 2.5 (S/S, P/S) ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
NEMO, etc. PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
Polyglass USA, Inc. Elastoflex S6 3.0 (P/P) ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.40
-1.40
-1.80
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
NEMO, etc. PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
Polyglass USA, Inc. Elastoflex V ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.40
-1.40
-1.80
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
NEMO, etc. PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
Polyglass USA, Inc. Elastoflex SA V ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
Polyglass USA, Inc. Elastoflex SA V FR ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
----
----
----
----
----
----
----
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
Siplast Paradiene 20 ---- ---- ---- Steel
Steel
Steel
Steel
1
1
1
1
----
----
----
----
-2.23
-3.35
-2.87
-2.90
----
----
----
----
-46.67
-70.00
-60.00
-60.00
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 8
Intertek
Intertek
Intertek
exp. Service Inc.
E9988.03-109-44
E9988.05-109-44
E9988.06-109-44
SIPZ-DRS-00215482-01-5100
Siplast Paradiene 20 TG ---- ---- ---- Plywood
Steel
Steel
Steel
1
1
1
1
----
----
----
----
-1.40
-1.80
-2.86
-1.46
----
----
----
----
-30.00
-37.00
-60.00
-30.00
PARS Test Report 2
PARS Test Report 6
PARS Test Report 7
PARS Test Report 9
Intertek
exp. Service Inc.
exp. Service Inc.
exp. Service Inc.
E998.02-109-44
SIPZ-DRS-00221706-02-5100
SIPZ-DRS-00221706-01-5100
SIPZ-DRS-00221706-03-5100
Siplast Paradiene 20 SA ---- ---- ---- Steel 1 ---- -1.90 ---- -40.00 PARS Test Report 1 Intertek E9988.01-109-44
Soprema Inc. Elastophene Flam ---- ---- ---- Steel
Steel
Steel
1
4
3
----
-1.40
-2.10
-2.90
-3.40
-5.00
----
-30.00
-45.00
-60.00
-70.00
-105.00
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. Sopraflash Flam Stick ---- ---- ---- Steel 3 -1.40 -2.80 -30.00 -58.00 PARS Test Report 1 exp. Service Inc. PUB-DRU305544
Soprema Inc. Sopralene Flam 180 ---- ---- ---- Steel
Steel
1
4
----
-1.40
-2.90
-3.40
----
-30.00
-60.00
-70.00
PARS Test Report 2
PARS Test Report 3
exp. Service Inc. PUB-DRU293332
PUB-DRU304337
Soprema Inc. Sopralene Flam 250 ---- ---- ---- Steel
Steel
Steel
1
4
3
----
-1.40
-2.10
-2.90
-3.40
-5.00
----
-30.00
-45.00
-60.00
-70.00
-105.00
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. Sopraply Base 520 ---- ---- ---- Steel
Steel
Steel
1
4
3
----
-1.40
-2.10
-2.90
-3.40
-5.00
----
-30.00
-45.00
-60.00
-70.00
-105.00
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Primary Material Secondary Materials & Deck Tested Assembly Report Data
Manufacturer Membrane Insulation
Overlay
Insulation Deck
Overlay
Deck Tested
Systems
kPa Psf Downloadable
Test Report
Test Facility Test Facility
Report No.
Low High Low High
Firestone Building Products SBS Torch ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS FR Torch ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS Premium ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Firestone Building Products SBS Premium FR Torch ---- ---- ---- Steel 1 ---- -2.10 ---- -45.00 PARS Test Report 1 exp. Service Inc. PUB-DRU281261
Polyglass USA, Inc. Elastoflex S6 G ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.40
-1.40
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-1.80
-3.40
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
-72.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
PARS Test Report 23
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
PLYG-PARS-5.2
Polyglass USA, Inc. Elastoflex S6 G FR ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.40
-1.40
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-1.80
-3.40
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
-72.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
PARS Test Report 23
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
PLYG-PARS-5.2
Polyglass USA, Inc. Elastoshield TS G FR ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.40
-1.40
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-1.80
-3.40
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
-72.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
PARS Test Report 23
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
PLYG-PARS-5.2
Polyglass USA, Inc. Polyfresko G ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.40
-1.40
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-1.80
-3.40
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
-72.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
PARS Test Report 23
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
PLYG-PARS-5.2
Polyglass USA, Inc. Polyfresko G FR ---- ---- ---- Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-3.40
-1.40
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-3.10
-1.80
-3.40
-3.40
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-64.00
-70.00
-30.00
-38.00
-72.00
-72.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
PARS Test Report 10
PARS Test Report 11
PARS Test Report 12
PARS Test Report 13
PARS Test Report 14
PARS Test Report 15
PARS Test Report 16
PARS Test Report 17
PARS Test Report 18
PARS Test Report 19
PARS Test Report 20
PARS Test Report 21
PARS Test Report 22
PARS Test Report 23
NEMO, etc. PLYG-PARS-1.8
PLYG-PARS-1.9
PLYG-PARS-1.10
PLYG-PARS-1.11
PLYG-PARS-1.12
PLYG-PARS-1.13
PLYG-PARS-1.14
PLYG-PARS-1.15
PLYG-PARS-1.16
PLYG-PARS-1.17
PLYG-PARS-1.18
PLYG-PARS-1.19
PLYG-PARS-1.20
PLYG-PARS-1.21
PLYG-PARS-1.22
PLYG-PARS-1.23
PLYG-PARS-1.24
PLYG-PARS-1.25
PLYG-PARS-2
PLYG-PARS-3
PLYG-PARS-4
PLYG-PARS-5.1
PLYG-PARS-5.2
Siplast Paradiene 30 TG ---- ---- ---- Steel
Steel
Steel
Steel
Steel
1
1
1
1
1
----
----
----
----
----
-1.90
-1.80
-2.86
-2.90
-1.46
----
----
----
----
----
-40.00
-37.00
-60.00
-60.00
-30.00
PARS Test Report 1
PARS Test Report 6
PARS Test Report 7
PARS Test Report 8
PARS Test Report 9
Intertek
exp. Service Inc.
exp. Service Inc.
exp. Service Inc.
exp. Service Inc.
E9988.01-109-44
SIPZ-DRS-00221706-02-5100
SIPZ-DRS-00221706-01-5100
SIPZ-DRS-00215482-01-5100
SIPZ-DRS-00221706-03-5100
Siplast Paradiene 30 ---- ---- ---- Plywood
Steel
Steel
Steel
1
1
1
1
----
----
----
----
-1.40
-2.30
-3.35
-2.87
----
----
----
----
-30.00
-46.67
-70.00
-60.00
PARS Test Report 2
PARS Test Report 3
PARS Test Report 4
PARS Test Report 5
Intertek E9988.02-109-44
E9988.03-109-44
E9988.05-109-44
E9988.06-109-44
Soprema Inc. Sopralene Stick HR GR ---- ---- ---- Plywood 2 -1.80 -3.00 -37.00 -62.00 PARS Test Report 4 exp. Service Inc. PUB-DRC303967
Soprema Inc. Soprafix Traffic Cap 660 ---- ---- ---- Steel 3 -1.40 -2.80 -30.00 -58.00 PARS Test Report 1 exp. Service Inc. PUB-DRU305544
Soprema Inc. Soprafix Traffic Cap FR 661 ---- ---- ---- Steel 3 -1.40 -2.80 -30.00 -58.00 PARS Test Report 1 exp. Service Inc. PUB-DRU305544
Soprema Inc. Sopralene Flam 180 GR ---- ---- ---- Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. Sopralene Flam 250 GR ---- ---- ---- Steel
Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
-117.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
PARS Test Report 6
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
SOPI-DRS-00231265-08-5100
Soprema Inc. Sopralene Mammouth GR ---- ---- ---- Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. Sopraply Traffic Cap 560 ---- ---- ---- Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. Sopraply Traffic Cap FR 561 ---- ---- ---- Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389
Soprema Inc. SopraStar Flam HD GR ---- ---- ---- Steel
Steel
Steel
Steel
3
1
4
3
-1.40
----
-1.40
-2.10
-2.80
-2.90
-3.40
-5.00
-30.00
----
-30.00
-45.00
-58.00
-60.00
-70.00
-105.00
PARS Test Report 1
PARS Test Report 2
PARS Test Report 3
PARS Test Report 5
exp. Service Inc. PUB-DRU305544
PUB-DRU293332
PUB-DRU304337
PUB-DRU293389

2 EPDM Membrane Systems

  1. The tables on the adjacent tabs display data and links to Tested Assembly Reports listed by the membrane type shown on the tab. These are reports that detail the makeup and performance of roof systems tested using the CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems (latest edition). Use the maximum wind uplift values that equal or exceed the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the British Columbia Building Code, Division B, Part 4 (4.1.7 Specified Wind Loads));
    (NOTE: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
  2. Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the RoofStar Guarantee Program (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
  3. In cases where a tested Secondary material is not accepted by the RoofStar Guarantee Program, look for alternates which often are published in the each report. In the absence of published alternates, consult the manufacturer of the Tested Assembly for alternates that are accepted by the RoofStar Guarantee Program, and obtain the manufacturer's written approval.
Manufacturer Product Name Number of Tested Systems
(per report)
kPa (Low) kPa (High) Psf (Low) Psf (High) Deck Type Downloadable Test Report Test Facility Test Facility Report No.
Carlisle Syntec Systems Canada Sure-Seal 45 mil Non-reinforced Membrane 1 Tested System ---- -1.80 ---- -37.50 Steel PARS Test Report 1 exp. Service Inc. RAP-DRU237235
Firestone Building Products Rubbergard EPDM Membrane 1 Tested System ---- -2.10 ---- -45.00 Steel PARS Test Report 2
PARS Test Report 3
exp. Service Inc. PUB-DRU266208
PUB-DRU280325
Firestone Building Products Rubbergard ECO White EPDM Membrane 1 Tested System ---- -3.20 ---- -67.00 Steel PARS Test Report 2
PARS Test Report 3
exp. Service Inc. PUB-DRU266208
PUB-DRU280325

3 TPO Membrane Systems

  1. The tables on the adjacent tabs display data and links to Tested Assembly Reports listed by the membrane type shown on the tab. These are reports that detail the makeup and performance of roof systems tested using the CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems (latest edition). Use the maximum wind uplift values that equal or exceed the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the British Columbia Building Code, Division B, Part 4 (4.1.7 Specified Wind Loads));
    (NOTE: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
  2. Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the RoofStar Guarantee Program (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
  3. In cases where a tested Secondary material is not accepted by the RoofStar Guarantee Program, look for alternates which often are published in the each report. In the absence of published alternates, consult the manufacturer of the Tested Assembly for alternates that are accepted by the RoofStar Guarantee Program, and obtain the manufacturer's written approval.
Manufacturer Product Name Number of Tested Systems
(per report)
kPa (Low) kPa (High) Psf (Low) Psf (High) Deck Type Downloadable Test Report Test Facility Test Facility Report No.
Carlisle Syntec Systems Canada Sure-Weld 45 mil TPO Membrane 1 Tested System ---- -1.70 ---- -35.00 Steel PARS Test Report 3 exp. Service Inc. RAP-DRU208096
Firestone Building Products Ultraply 1.2 mm TPO Membrane 1 Tested System
1 Tested System
----
----
-2.9
-3.20
----
----
-60.00
-67.00
Steel
Steel
PARS Test Report 4
PARS Test Report 5
exp. Service Inc. PUB-DRU266213
PUB-DRU281358
Firestone Building Products UltraPly 1.6 mm TPO Membrane 1 Tested System
1 Tested System
----
----
-2.9
-3.20
----
----
-60.00
-67.00
Steel
Steel
PARS Test Report 4
PARS Test Report 5
exp. Service Inc. PUB-DRU266213
PUB-DRU281358

4 PVC Membrane Systems

  1. The tables on the adjacent tabs display data and links to Tested Assembly Reports listed by the membrane type shown on the tab. These are reports that detail the makeup and performance of roof systems tested using the CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems (latest edition). Use the maximum wind uplift values that equal or exceed the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the British Columbia Building Code, Division B, Part 4 (4.1.7 Specified Wind Loads));
    (NOTE: while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
  2. Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report. It will break down the assembly by its components. Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the RoofStar Guarantee Program (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
  3. In cases where a tested Secondary material is not accepted by the RoofStar Guarantee Program, look for alternates which often are published in the each report. In the absence of published alternates, consult the manufacturer of the Tested Assembly for alternates that are accepted by the RoofStar Guarantee Program, and obtain the manufacturer's written approval.
Manufacturer Product Name Number of Tested Systems
(per report)
kPa (Low) kPa (High) Psf (Low) Psf (High) Deck Type Downloadable Test Report Test Facility Test Facility Report No.
Carlisle Syntec Systems Canada Sure-Flex 50 mil PVC Membrane 1 Tested System ---- -1.80 ---- -37.50 Steel PARS Test Report 2 exp. Service Inc. RAP-DRU237258