Difference between revisions of "Template:Materials - Waterproofing Membranes (SBS)"

Latest revision as of 17:29, 26 February 2018

SBS (Styrene Butadiene Styrene) Modified Bituminous sheet waterproofing is prefabricated elastomeric membranes that are reinforced with mats consisting of polyester, fibreglass or a combination of both reinforcement types. SBS modified bituminous membranes are available in varied thicknesses with specific physical properties to satisfy the demands of particual waterproofing conditions as well as surface finishes that facilitate various application methods.

Composition

Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display variable elastomeric properties when modified. These sheets generally consist of bitumen (oxidized or modified), reinforcement, and surfacing materials. The performance of these membranes may be compromised by subtle, seemingly inconsequential changes in composition.

The formulation of the bitumen is critical, particularly when its physical properties are modified by the addition of polymers. Bitumen is most commonly modified with styrene butadiene styrene (SBS). The manufacturer must ensure that a suitable degree of compatibility exists between the bitumen and the polymer and that a thorough mix has been obtained. The careful selection and combination of bitumen and polymer (the type of modifier, the percentage of polymer used, etc.) determines the physical properties and long term performance of the modified bituminous "binder". The binder provides the membrane with its waterproofing capability and may impart the following properties:

low temperature flexibility
elasticity
high temperature resistance to flow
resistance to aging

The bitumen utilized for oxidized bituminous membranes has been "blown", similar to roofing asphalt. This produces a higher softening point and, therefore, a more useful temperature range.

The physical properties of the binder are further enhanced by the imposition by saturation or coating onto a carrier or reinforcing mat, most commonly a textile such as:

non-woven spun-bonded polyester
woven polyester scrim
fibreglass mats
woven fibreglass cloth
combinations of the above.

1. Base Membranes

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer	Product Name	Nominal Product Thickness (mm)	Approximate Weight (Kg/m²)	Reinforcement Material	Reinforcement Material Weight (g/m2)	Applicator Training
Garland Canada Inc.	FLEXBASE 120	‒	‒	‒	‒	‒
Garland Canada Inc.	FLEXBASE E 120	‒	‒	‒	‒	‒
Garland Canada Inc.	FLEXBASE PLUS 120	‒	‒	‒	‒	‒
Garland Canada Inc.	STRESSBASE 120	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Armourbridge/Pont	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Armourbond Flash Base	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Modiflex MP-180 F/S	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Torchflex TF-95 FF	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Torchflex TP-180 FF	‒	‒	‒	‒	‒
Siplast	Teranap 431 (2m x 20m)	‒	‒	‒	‒	‒
Siplast	Teranap (1m x 8m)	‒	‒	‒	‒	‒
Soprema Inc.	Elastophene Flam	‒	‒	‒	‒	‒
Soprema Inc.	Colphene Flam 180	‒	‒	‒	‒	‒
Soprema Inc.	Colphene Flam HR	4.00	-	Non-woven Polyester	‒	‒
Soprema Inc.	Colphene Flam HR SP	4.00	-	Non-woven Polyester	‒	‒
Soprema Inc.	Sopralene Flam 180	‒	‒	‒	‒	‒
Soprema Inc.	Sopralene Flam 250	‒	‒	‒	‒	‒
Soprema Inc.	Sopraply Base 520	‒	‒	‒	‒	‒
Soprema Inc.	Sopraply Base Plus PP 3.0	3.00	4.00	Composite	‒	Consult Manufacturer

2. Cap Membranes

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer	Product Name	Nominal Product Thickness (mm)	Approximate Weight (Kg/m²)	Reinforcement Material	Reinforcement Material Weight (g/m2)	Applicator Training
Garland Canada Inc.	Stressply E FR Mineral	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply EUV	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply Plus FR Mineral	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply Mineral	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply IV	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply IV Plus	‒	‒	‒	‒	‒
Garland Canada Inc.	Stressply MAX	‒	‒	‒	‒	‒
Garland Canada Inc.	Biflex Cap	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Torchflex TP-250 Cap	‒	‒	‒	‒	‒
IKO Industries Ltd.'	Torchflex TP-180 Cap	‒	‒	‒	‒	‒
Siplast	Teranap 431 (2m x 20m)	‒	‒	‒	‒	‒
Siplast	Teranap (1m x 8m)	‒	‒	‒	‒	‒
Soprema Inc.	Sopralene 180 SP 3.5	‒	‒	‒	‒	‒
Soprema Inc.	Trafikrock	‒	‒	‒	‒	‒
Soprema Inc.	Sopralene Flam 180 GR	‒	‒	‒	‒	‒
Soprema Inc.	Sopralene Flam 250 GR	‒	‒	‒	‒	‒
Soprema Inc.	Sopraply Traffic Cap 560	‒	‒	‒	‒	‒
Soprema Inc.	Sopraply Traffic Cap Plus G/P 4.0	4.00	‒	Composite	‒	Consult Manufacturer
Soprema Inc.	Antirock	‒	‒	‒	‒	‒

3. Self-adhering Membranes

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer	Product Name	Nominal Product Thickness (mm)	Approximate Weight (Kg/m²)	Reinforcement Material	Reinforcement Material Weight (g/m2)	Applicator Training
Soprema Inc.	Sopralene Flam Stick	‒	‒	‒	‒	‒

@@ Line 1: / Line 1: @@
-:<big><big>1. Base Membranes</big></big>
 :SBS (Styrene Butadiene Styrene) Modified Bituminous sheet waterproofing is prefabricated elastomeric membranes that are reinforced with mats consisting of polyester, fibreglass or a combination of both reinforcement types. SBS modified bituminous membranes are available in varied thicknesses with specific physical properties to satisfy the demands of particual waterproofing conditions as well as surface finishes that facilitate various application methods.
@@ Line 23: / Line 21: @@
 :* combinations of the above.
+:<big><big>1. Base Membranes</big></big>
 {|	class="wikitable sortable" style="margin-left: 20pt; margin-right: auto; border: none;"
 |+	Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
@@ Line 33: / Line 32: @@
 !	style="vertical-align:top;"	|	Applicator Training
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Flexbase 120	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:FLEXBASE 120|FLEXBASE 120]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
+|-
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:FLEXBASE E 120|FLEXBASE E 120]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
+|-
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:FLEXBASE PLUS 120|FLEXBASE PLUS 120]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
+|-
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:STRESSBASE 120|STRESSBASE 120]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
+|-
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Armourbridge/Pont|Armourbridge/Pont]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
+|-
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Armourbond Flash Base|Armourbond Flash Base]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Flexbase E 120	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Modiflex MP-180 F/S|Modiflex MP-180 F/S]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Flexbase PLUS 120	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Torchflex TF-95 FF |Torchflex TF-95 FF]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressbase 120	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Torchflex TP-180 FF |Torchflex TP-180 FF]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	IKO Armourbridge / Pont	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Siplast]]'''	||	[[Materials:Teranap 431 (2m x 20m) |Teranap 431 (2m x 20m)]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Armourbond Flash Base (Stripping)	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Siplast]]'''	||	[[Materials:Teranap (1m x 8m) |Teranap (1m x 8m)]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Modiflex MP-180 F / S	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Elastophene Flam|Elastophene Flam]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Torchflex TF-95 FF Base	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Colphene Flam 180|Colphene Flam 180]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Torchflex TP-180-FF Base	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Colphene Flam HR|Colphene Flam HR]]	||	style="text-align:center;"|	4.00	||	style="text-align:center;"|	-	||	style="text-align:center;"|	Non-woven Polyester	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Elastophene Flam	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Colphene Flam HR SP|Colphene Flam HR SP]]	||	style="text-align:center;"|	4.00	||	style="text-align:center;"|	-	||	style="text-align:center;"|	Non-woven Polyester	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Colphene Flam 180	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180|Sopralene Flam 180]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene Flam 180	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 |Sopralene Flam 250 ]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene Flam 250	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base 520 |Sopraply Base 520]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopraply Base 520	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Base Plus PP 3.0 |Sopraply Base Plus PP 3.0]]	||	style="text-align:center;"|	3.00	||	style="text-align:center;"|	4.00	||	style="text-align:center;"|	Composite	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Consult Manufacturer
 |-
 |}
 :<big><big>2. Cap Membranes</big></big>
 {|	class="wikitable sortable" style="margin-left: 20pt; margin-right: auto; border: none;"
@@ Line 75: / Line 83: @@
 !	style="vertical-align:top;"	|	Applicator Training
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply E FR Mineral	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply E FR Mineral |Stressply E FR Mineral]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply EUV	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply EUV|Stressply EUV]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply Plus FR Mineral	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply Plus FR Mineral|Stressply Plus FR Mineral]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply Mineral	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply Mineral|Stressply Mineral]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply IV	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply IV|Stressply IV]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply IV Plus	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply IV Plus|Stressply IV Plus]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Stressply MAX	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Stressply MAX|Stressply MAX]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Garland Canada Inc.]]'''	||	Biflex Cap	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Garland Canada Inc.]]'''	||	[[Materials:Biflex Cap|Biflex Cap]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Torchflex TP-250 Cap	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Torchflex TP-250 Cap|Torchflex TP-250 Cap]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[IKO Industries Ltd.]]''''	||	Torchflex TP-180 Cap	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[IKO Industries Ltd.]]''''	||	[[Materials:Torchflex TP-180 Cap|Torchflex TP-180 Cap]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Siplast]]'''	||	Teranap 431 (2m x 20m)	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Siplast]]'''	||	[[Materials:Teranap 431 (2m x 20m) |Teranap 431 (2m x 20m)]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Siplast]]'''	||	Teranap (1m x 8m)	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Siplast]]'''	||	[[Materials:Teranap (1m x 8m) |Teranap (1m x 8m)]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene 180 SP 3.5	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene 180 SP 3.5|Sopralene 180 SP 3.5]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Trafikrock	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Trafikrock|Trafikrock]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene Flam 180 (FR) GR	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 180 GR|Sopralene Flam 180 GR]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene Flam 250 (FR) GR	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam 250 GR|Sopralene Flam 250 GR]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopraply Traffic Cap 560	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Traffic Cap 560|Sopraply Traffic Cap 560]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
-||	'''[[Soprema Inc.]]'''	||	Antirock	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopraply Traffic Cap Plus GP 4.0|Sopraply Traffic Cap Plus G/P 4.0]]	||	style="text-align:center;"|	4.00	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Composite	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Consult Manufacturer
+|-
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Antirock|Antirock]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
 |}
 :<big><big>3. Self-adhering Membranes</big></big>
 {|	class="wikitable sortable" style="margin-left: 20pt; margin-right: auto; border: none;"
@@ Line 125: / Line 135: @@
 !	style="vertical-align:top;"	|	Applicator Training
 |-
-||	'''[[Soprema Inc.]]'''	||	Sopralene Flam Stick	||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|		||	style="text-align:center;"|
+||	'''[[Soprema Inc.]]'''	||	[[Materials:Sopralene Flam Stick |Sopralene Flam Stick]]	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	‒
 |-
 |}