Architectural Metal Roofing
Architectural Metal Roofing
| Accepted Materials for a RoofStar Guarantee
The tables and products shown below provide basic material data and links to more information about the materials, including manufacturers' published Technical Data sheets, but this information is not intended for use as a comparison of material performance or quality. It is the sole responsibility of the Design Authority to assess the performance capability and material suitability for specific design requirements. The materials listed are those which have been accepted by the RoofStar Guarantee Program (RCABC Guarantee Corp., or RGC) for use in a roof or grade-level waterproofing system that will qualify for a RoofStar Guarantee. The acceptance of these materials by the RGC (RoofStar Guarantee Program) in no way reflects on the quality or performance of other materials not listed. The materials and guideline specifications are listed under the name of the manufacturer and/or supplier of the primary membrane material, with the exception of BUR membranes for which the reader will find RoofStar Guarantee Program guidelines on traditional built-up roofing systems (BUR) incorporating organic and glass felt primary membranes. |
1 Site-Formed Metal Roof Systems (RCABC Active Members)
Template:Materials - ASM Site-Formed Metal Roofing Systems
2 Pre-manufactured Metal Roof Systems
| Manufacturer | Product Name | Profiles | Seam Heights mm (in.) |
Seam Lock Type | Panel Width (Range) mm (in.) |
Max. Panel Length m (ft) |
|---|---|---|---|---|---|---|
| Elevate (fomerly Firestone) | Una-Clad UC Metal Roof Panel Systems | ‒ | 38 (1 1/2) | ‒ | ‒ | None stated |
| Garland Canada Inc. | R-Mer Loc | ‒ | ‒ | Snap | 300, 400, 450 (12, 16, 18) | None stated |
| Garland Canada Inc. | R-Mer Loc LX | ‒ | ‒ | ‒ | ‒ | None stated |
| Garland Canada Inc. | R-Mer Span | ‒ | ‒ | Snap Cap | 300, 400, 450 (12, 16, 18) | None stated |
| Garland Canada Inc. | R-Mer Seam | ‒ | ‒ | Snap Cap | ‒ | None stated |
| Precision Metals Ltd. | NewTech FF 100 Metal Panel | See TDS | 23.4 (15/16) | Snap | 300 - 600 (12" - 24") | None stated |
| Precision Metals Ltd. | NewTech SS 100 Metal Panel | See TDS | 25.4 (1) | Mechanical | 300 - 600 (12" - 24") | None stated |
| Westform Metals | Prolok 12, 16 | See TDS | 25 (1) | Snap | 300 - 400 (12 - 16) | None stated |