SBS Roof System Details

Editor's note
This page is currently under revision, as the details are renumbered and new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links.

The drawings linked on this page are intended to represent a variety of SBS-modified Bitumen Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.

For further information about SBS-modified Bitumen Membrane System designs and requirements, see SBS Modified Bitumen Membrane Systems.

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.

---

1 GENERAL

SBS 1.3.1-1 Conventionally Insulated System (typical)

SBS 1.3.1-3 Protected Membrane Roof Assembly (typical)

2 SUPPORTING STRUCTURES: Decks and Walls

3 SECURING the ROOF ASSEMBLY

4 MATERIALS

5 DECK and WALL OVERLAYS

6 AIR and VAPOUR CONTROLS

7 INSULATION

8 INSULATION OVERLAYS

9 FIELD MEMBRANE

10 PERIMETERS and WALLS

SBS 10.3.1-1 Perimeter Membrane Termination (typical)

SBS 10.3.1-2 Perimeter Membrane Termination (expansion joint)

SBS 10.3.1-3 Perimeter Membrane Termination (stucco wall, replacement roofing)

SBS 10.3.1-4 Perimeter Membrane Termination (double surface reglet)

SBS 10.3.5.1-1 Parapet (typical)

SBS 10.3.5.1-2 Parapet (independent of roof structure)(typical)

SBS 10.3.5.1-3 Parapet, tall (typical)

SBS 10.3.5.1-4 Parapet (wall tie-in)

SBS 10.3.5.2 Metal Edge Termination

SBS 10.3.5.3 Cant Edge

SBS 10.3.6.1 Expansion Joint

SBS 10.3.6.2 Control Joint (roof divider)

SBS 10.3.7.1 Low Door Opening

SBS 10.3.7.2 Window Curb

SBS 10.3.9-1 Roof-Wall Transitions (fire separation joint)

SBS 10.3.9-2 Roof-Wall Transitions (fire separation wall)

---

11 11 DRAINS and PENETRATIONS

SBS 11.3.2.2-1 Cast Iron Drains

SBS 11.3.2.4-1 Flange-style Drains (typical)

SBS 11.3.2.4-2 Flange-style Drains (clamping)

SBS 11.3.2.5-1 Scuppers and Overflows (open wall scupper)

D1.7.8-5 Water & Drainage (Through-wall Scupper)

D1.7.6-1 Curbs & Sleepers (Equipment Sleeper)

D1.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)

D1.7.6-3 Curbs & Sleepers (Basic Curb)

D1.7.6-4 Curbs & Sleepers (Mechanical Opening)

D1.7.7-1 Strip-in Flashings (Metal Plumbing)

D1.7.7-2 Strip-in Flashings (Two-part Cable)

D1.7.9-1 Miscellaneous Penetrations (Roof Anchor)

D1.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)

D1.7.9-3 Miscellaneous Penetrations (Wall Anchor - Protected Roof Assy)

D1.7.7-3 Strip-in Flashings (Sealant Pocket)

D1.7.9-4 Miscellaneous Penetrations (Guardrails)

12 PROTECTED MEMBRANES and OTHER DETAILS

13 METAL FLASHINGS

14 THE ROOF as a PLATFORM

D1.7.6-5 Curbs & Sleepers (Pre-curb for Planters) PDF

---

SBS Modified Bitumen Membrane Systems

Back to Construction Details Section