Manufacturers:Carlisle SynTec Systems Canada

Jump to: navigation, search

Manufacturers:Carlisle SynTec Systems Canada

Revision as of 17:17, 29 January 2026 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Division C - Accepted Materials

Carlisle SynTec Systems Canada
Associate Member (Manufacturer)

Systems/Materials Listed by Category under Tabs Above


The information published in the RCABC Roofing Practices Manual and offered under each tab does NOT represent a complete set of the manufacturer’s data or specifications, nor is any listed system or material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
http://www.carlislesyntec.com
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
U.S.A.
Country of Manufacture
U.S.A.
Year First Installed
BC: 1998
Canada: 1996
Foreign: 1990

Insulation

Polyisocyanurate Foam
SecurShield
SecurShield RapidLock (RL) Polyiso
SecurShield RapidLock (RL) HD Polyiso

Insulation Overlay Panels

High-density Insulation Overlays
SecurShield HD
SecurShield HD Plus

EPDM Membranes

(See the membrane tables in Division C)

Reinforced
Sure-Tough (Reinforced) EPDM
Unreinforced
Sure-Seal (Non-reinforced) EPDM
Sure-Seal EPDM SAT
Sure-White (Non-reinforced) EPDM SAT
Unreinforced (Fleece-backed)
AFX EPDM
FleeceBACK EPDM
FleeceBACK RL (RapidLock) EPDM

TPO Membranes

(See the membrane tables in Division C)

FleeceBACK AFX TPO
FleeceBACK RL (RapidLock) TPO (Reinforced)
FleeceBACK TPO
Sure-Weld TPO
Sure-Weld TPO SAT (Reinforced)

PVC Membranes

(See the membrane tables in Division C)

FleeceBACK RL (RapidLock) PVC (Reinforced)
Sure-Flex FRS PVC
Sure-Flex PVC

Hot Fluid-applied Rubberized Asphalt Membranes

CCW 500R Liquid Applied Hot Rubberized Asphalt

Extensive VR System (sedum tile).jpg

Extensive Systems

Semi-intensive Systems

Intensive Systems

Wind Resistance

Consult the manufacturer for reports or letters of assurance

* System is designed for a protected membrane roof assembly, also known as an inverted roof assembly.
** Semi-intensive, Intensive, and Hybrid (blue-green) vegetated roof systems are only permitted on protected membrane roofs (PMR); see Sentence 1.1.3.2.(5) in the RGC Standard for Vegetated Roofs. Any deviation to the "RGC Standard for Vegetated Roofs" must be made by submitting a request to the RGC for a written Variance, as defined in Article 1.1.3.6.

Home

© RCABC 2026
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=Manufacturers:Carlisle_SynTec_Systems_Canada&oldid=53305"