Difference between revisions of "Manufacturers:Soprema Inc."

Jump to: navigation, search

Difference between revisions of "Manufacturers:Soprema Inc."

 
(3 intermediate revisions by the same user not shown)
Line 42: Line 42:
 
</tab>
 
</tab>
 
<tab name="Materials for Waterproofing Roofs">
 
<tab name="Materials for Waterproofing Roofs">
−
<div class="col-md-12">
+
{| class="wikitable"
 +
|-
 +
| style="background-color:#FFE4B5" | '''<big>Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes</big>'''
 +
<br>
 +
Bituminous roofing membranes are governed by RGC Acceptance Criteria [https://rpm.rcabc.org/images/9/9e/Acceptance_Criteria_RGC_ACWP-MOD.pdf RGC ACWP-MOD] (applicable to membranes accepted after July 1, 2023).  The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified
 +
bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.
 +
 
 +
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B.  The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).
 +
 
 +
Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard.  Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction.  Consult the local manufacturer's representative through the [https://www.rcabc.org/members/find-a-member/ "Find a Member"] page on the RCABC association website.
 +
|-
 +
|}
 
<div class="col-md-3">
 
<div class="col-md-3">
 
<hr>
 
<hr>
Line 180: Line 191:
 
'''Single-Component Liquid Membrane Flashing'''
 
'''Single-Component Liquid Membrane Flashing'''
 
:*[[Materials:Alsan Flashing|Alsan Flashing]]
 
:*[[Materials:Alsan Flashing|Alsan Flashing]]
−
</div>
 
 
</div>
 
</div>
  
 
</tab>
 
</tab>
−
<tab name="Materials for Water-shedding Roofs">
+
<tab name="Materials for Waterproofing at Grade">
  
−
<div class="col-md-12">
+
{| class="wikitable"
−
<div class="col-md-6">
+
|-
−
<hr>
+
| style="background-color:#FFE4B5" | '''<big>Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes</big>'''
 +
<br>
 +
Bituminous roofing membranes are governed by RGC Acceptance Criteria [https://rpm.rcabc.org/images/9/9e/Acceptance_Criteria_RGC_ACWP-MOD.pdf RGC ACWP-MOD] (applicable to membranes accepted after July 1, 2023).  The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified
 +
bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.
  
−
====Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)====
+
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B.  The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).
−
:'''Mechanically Fastened Materials'''
 
−
:*[[Materials:Lastoflex |Lastoflex]]
 
  
−
:'''Self-adhered Materials'''
+
Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard.  Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction.  Consult the local manufacturer's representative through the [https://www.rcabc.org/members/find-a-member/ "Find a Member"] page on the RCABC association website.
−
:*[[Materials:Lastobond 195 |Lastobond 195]]
+
|-
−
:*[[Materials:Lastobond 240|Lastobond 240]]
+
|}
−
:*[[Materials:Lastobond Shield|Lastobond Shield]]
 
−
:*[[Materials:Lastobond Shield HT|Lastobond Shield HT]]
 
−
:*[[Materials:Sopraseal Stick 1100 T|Sopraseal Stick 1100 T]]
 
−
 
 
−
</div>
 
−
<div class="col-md-6">
 
−
<hr>
 
−
 
 
−
====Underlayment/Eave Protection (ASM)====
 
−
:'''Self-adhered Materials'''
 
−
:*[[Materials:Lastobond 195 |Lastobond 195]]
 
−
:*[[Materials:Lastobond 240|Lastobond 240]]
 
−
:*[[Materials:Lastobond Shield|Lastobond Shield]]
 
−
:*[[Materials:Lastobond Shield HT|Lastobond Shield HT]]
 
−
:*[[Materials:Lastobond Stick VP (Soprema)|{{hilite | Lastobond Stick VP || 2022-February-5 }}]]
 
−
:*[[Materials:Sopraply Stick Duo|Sopraply Stick Duo]] <small>(formerly Sopralene Stick HR 40)</small>
 
−
:*[[Materials:Sopraseal Stick 1100 T|Sopraseal Stick 1100 T]]
 
−
 
 
−
</div>
 
−
</div>
 
−
 
 
−
</tab>
 
−
<tab name="Materials for Waterproofing at Grade">
 
−
 
 
−
<div class="col-md-12">
 
 
<div class="col-md-3">
 
<div class="col-md-3">
 
<hr>
 
<hr>
Line 289: Line 275:
 
'''Two-part Reinforced Liquid Membrane Flashing'''
 
'''Two-part Reinforced Liquid Membrane Flashing'''
 
:*[[Materials:Alsan RS System|Alsan RS Liquid Flashing]]
 
:*[[Materials:Alsan RS System|Alsan RS Liquid Flashing]]
 +
 +
</div>
 +
 +
</tab>
 +
<tab name="Materials for Water-shedding Roofs">
 +
 +
<div class="col-md-12">
 +
<div class="col-md-6">
 +
<hr>
 +
 +
====Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)====
 +
:'''Mechanically Fastened Materials'''
 +
:*[[Materials:Lastoflex |Lastoflex]]
 +
 +
:'''Self-adhered Materials'''
 +
:*[[Materials:Lastobond 195 |Lastobond 195]]
 +
:*[[Materials:Lastobond 240|Lastobond 240]]
 +
:*[[Materials:Lastobond Shield|Lastobond Shield]]
 +
:*[[Materials:Lastobond Shield HT|Lastobond Shield HT]]
 +
:*[[Materials:Sopraseal Stick 1100 T|Sopraseal Stick 1100 T]]
 +
 +
</div>
 +
<div class="col-md-6">
 +
<hr>
 +
 +
====Underlayment/Eave Protection (ASM)====
 +
:'''Self-adhered Materials'''
 +
:*[[Materials:Lastobond 195 |Lastobond 195]]
 +
:*[[Materials:Lastobond 240|Lastobond 240]]
 +
:*[[Materials:Lastobond Shield|Lastobond Shield]]
 +
:*[[Materials:Lastobond Shield HT|Lastobond Shield HT]]
 +
:*[[Materials:Lastobond Stick VP (Soprema)|{{hilite | Lastobond Stick VP || 2022-February-5 }}]]
 +
:*[[Materials:Sopraply Stick Duo|Sopraply Stick Duo]] <small>(formerly Sopralene Stick HR 40)</small>
 +
:*[[Materials:Sopraseal Stick 1100 T|Sopraseal Stick 1100 T]]
  
 
</div>
 
</div>
Line 370: Line 390:
 
====Hybrid Systems====
 
====Hybrid Systems====
 
*[[Materials:SKYWATER Ballasted-Inverted Hybrid Roof | SKYWATER<sup>®</sup> Ballasted-Inverted Hybrid Roof]]
 
*[[Materials:SKYWATER Ballasted-Inverted Hybrid Roof | SKYWATER<sup>®</sup> Ballasted-Inverted Hybrid Roof]]
−
*[[Materials:SKYWATER SOPRAFLOW CONTROL-Conventional Hybrid Roof | SKYWATER<sup>®</sup> SOPRAFLOW CONTROL-Conventional Hybrid Roof]]
+
*[[Materials:SKYWATER SOPRAFLOW CONTROL-Conventional Hybrid Roof | SKYWATER<sup>®</sup> SOPRAFLOW CONTROL-Conventional Hybrid Roof<span style="color:#FF0000;"><sup>**</sup></span>]]
 
<br>
 
<br>
 
*[[Materials:SKYWATER Ballasted-Conventional Hybrid Roof | SKYWATER® Ballasted-Conventional Hybrid Roof<span style="color:#FF0000;"><sup>**</sup></span>]]
 
*[[Materials:SKYWATER Ballasted-Conventional Hybrid Roof | SKYWATER® Ballasted-Conventional Hybrid Roof<span style="color:#FF0000;"><sup>**</sup></span>]]
Line 378: Line 398:
 
<hr>
 
<hr>
 
====Letters of Confirmation====
 
====Letters of Confirmation====
−
:[https://rpm.rcabc.org/images/e/e8/Soprema_Wind_Resistance_Letter_of_Confirmation_2022_%28Toundra_Box%29.pdf Wind resistance test (Toundra Box)]
+
Consult the manufacturer for reports or letters of assurance
−
:[https://rpm.rcabc.org/images/2/2a/Soprema_Wind_Resistance_Letter_of_Confirmation_2022-01_%28VRA%29.pdfWind resistance test 2022-01 (VRA)]
 
−
:[https://rpm.rcabc.org/images/2/24/Soprema_Wind_Resistance_Letter_of_Confirmation_2022-12_%28VRA%29.pdf Wind resistance test 2022-12 (VRA)]
 
 
</div>
 
</div>
 
</div>
 
</div>

Latest revision as of 19:14, 28 January 2025



Division C - Accepted Materials

Soprema Inc.
Associate Member (Manufacturer)

Systems/Materials Listed by Category under Tabs Above


The information published in the RCABC Roofing Practices Manual and offered under each tab does NOT represent a complete set of the manufacturer’s data or specifications, nor is any listed system or material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
https://www.soprema.ca/
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
France
Country of Manufacture
Canada, France, Germany, Switzerland, U.S.A.
Year First Installed
BC: 1979
Canada: 1979
Foreign: 1976
Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes


Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.

The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).

Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes


Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.

The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).

Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Insulation

XPS Insulation
Polyisocyanurate Insulation
Mineral Fibre Insulation

Insulation Overlay Panels

Asphaltic Overlays
High-density Insulation Overlays
Membrane-laminated Overlays

Felts (BUR)

Glass Felts

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets

SBS Polymer-Modified Bituminous Membranes (Cont.)

(See the membrane tables in Division C)

Cap Sheets

PVC Membranes

(See the membrane tables in Division C)

Hot Fluid-applied Rubberized Asphalt Membranes

(See the membrane tables in Division C)

PMMA Membranes (System)

(See the membrane tables in Division C)

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Two-Component Reinforced Liquid Membrane Flashing

Single-Component Liquid Membrane Flashing

Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes


Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.

The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).

Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Insulation

XPS Insulation

SBS-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets
Cap Sheets

PVC Membranes

(See the membrane tables in Division C)


Hot Fluid-applied Rubberized Asphalt Membranes

(See the membrane tables in Division C)

PMMA Membranes (System)

(See the membrane tables in Division C)

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Two-part Reinforced Liquid Membrane Flashing

Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)

Mechanically Fastened Materials
Self-adhered Materials

Underlayment/Eave Protection (ASM)

Self-adhered Materials
An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the Waterproofing or Water-shedding system. An Accessory is not an Accepted Material and therefore the RoofStar Guarantee does not extend to cover any potential material or installation failure. Accessories are listed in the Roofing Practices Manual merely for reference to specifiers, designers and installers.
Coatings
R-Nova Plus
R-Nova Plus Mastic
R-Nova Plus Matrix
Joints & Unions
Soprajoint Plus 20
Soprajoint Plus 40
Soprajoint Plus 75
Soprajoint Plus 125
Drainage Layers
Sopradrain Eco Vent
Photovoltaic Accessories
Soprasolar Fix EVO Pedestal

Extensive VR System (sedum tile).jpg

Extensive Systems

Semi-intensive Systems


Intensive Systems


Hybrid Systems


Letters of Confirmation

Consult the manufacturer for reports or letters of assurance

* System is designed for a protected membrane roof assembly, also known as an inverted roof assembly.
** Semi-intensive, Intensive, and Hybrid (blue-green) vegetated roof systems are only permitted on protected membrane roofs (PMR); see Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs". Any deviation to the "Standard for Vegetated Roofs" must be made by submitting a request to the RGC for a written Variance, as defined in Article 1.1.3.6.

Home

© RCABC 2025
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=Manufacturers:Soprema_Inc.&oldid=51206"