Difference between revisions of "Template:Materials - Eave Protection & Underlayment (Asphalt Shingles)"
Difference between revisions of "Template:Materials - Eave Protection & Underlayment (Asphalt Shingles)"
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | '''Eave protection''' is used to protect the eave and valley areas of | + | '''Eave protection''' is used to protect the eave and valley areas of water-shedding roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, eaves extend past the exterior face of the building and are not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows, it forms a barrier that prevents water from draining off the edge of the eaves. The water backs up behind the dam and gradually forces its way under the primary roof covering (asphalt shingles, metal panels, cedar shakes or shingles, etc.), where it warms and melts (the result of heat leakage through discontinuities in the air barrier system). Liquid water then leaks through the roof deck and into the structure. The results can range from minor staining to severe water damage to the structural members. |
| − | Eave protection | + | Eave protection membranes are designed to prevent the water from reaching the deck and leaking into the structure. These materials are self-adhering and manufactured with a rubberized asphaltic compound, or with butyl. Properly formulated and installed, these sheets have the potential to perform a long time. Slope and climate conditions are considerations for selection; refer to the Standard for further information and guidance. |
| + | |||
| + | '''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the roof covering, during weather events that might force water underneath. Refer to Part 8 in the Standard for slope limitations of nail-applied underlayments (not permitted on slopes less than 1:3 (4" in 12"). | ||
| − | |||
{| class="wikitable sortable mw-datatable" style="margin-left: 2pt; margin-right: auto; border: none;" | {| class="wikitable sortable mw-datatable" style="margin-left: 2pt; margin-right: auto; border: none;" | ||
| − | |+ | + | |+ <span style="color:#FF0000"><big>*</big> <small><u>Notice to Reader</u></span>: Some of the materials listed for eave or valley protection must be installed in multiple layers because, by themselves, they are too thin to satisfy the material requirements published in the [https://rpm.rcabc.org/index.php?title=Asphalt_Shingle_Systems_Standard Standard for Asphalt Shingle Roof Systems]. Consult the product manufacturer for appropriate application requirements, and the Standard for multiple layering requirements.</small> |
! style="width:275px; vertical-align:top;" | Manufacturer | ! style="width:275px; vertical-align:top;" | Manufacturer | ||
! style="width:275px; vertical-align:top;" | Product Name | ! style="width:275px; vertical-align:top;" | Product Name | ||
! style="width:275px; vertical-align:top;" | Product Type | ! style="width:275px; vertical-align:top;" | Product Type | ||
| − | ! style="width:100px;text-align:center;" | Product Thickness<br>mm (mil) | + | ! style="width:100px;text-align:center;" | Product Thickness<br>mm (mil) <span style="color:#FF0000"><big>*</big></span> |
! style="width:100px;text-align:center;" | Product Weight<br>Kg/m<sup>2</sup> (lb / 100<sup>2</sup> ') | ! style="width:100px;text-align:center;" | Product Weight<br>Kg/m<sup>2</sup> (lb / 100<sup>2</sup> ') | ||
! style="width:200px;text-align:center;" | Application Method | ! style="width:200px;text-align:center;" | Application Method | ||
| − | ! style="width:100px;text-align:center;" | Eaves | + | ! style="width:100px;text-align:center;" | Eaves <span style="color:#FF0000"><big>*</big></span> |
| − | ! style="width:100px;text-align:center;" | Valleys | + | ! style="width:100px;text-align:center;" | Valleys <span style="color:#FF0000"><big>*</big></span> |
! style="width:100px;text-align:center;" | Under-<br>layment | ! style="width:100px;text-align:center;" | Under-<br>layment | ||
|- | |- | ||
| Line 29: | Line 30: | ||
! style="width:100px;text-align:center; background-color:#C0C0C0" | | ! style="width:100px;text-align:center; background-color:#C0C0C0" | | ||
|- | |- | ||
| − | || '''[[Building Products of Canada Corp.]]''' || [[Materials:Gripgard|Gripgard]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| | + | || '''[[Manufacturers:Building Products of Canada Corp. | Building Products of Canada Corp.]]''' || [[Materials:Gripgard|Gripgard]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
| + | |- | ||
| + | || '''[[Manufacturers:Building Products of Canada Corp. | Building Products of Canada Corp.]]''' || [[Materials:Deckgard|{{hilite | Deckgard || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:Building Products of Canada Corp. | Building Products of Canada Corp.]]''' || [[Materials:ProDeck|{{hilite | ProDeck || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:Building Products of Canada Corp. | Building Products of Canada Corp.]]''' || [[Materials:Suredeck|{{hilite | Suredeck || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Building Products of Canada Corp.]]''' || [[Materials:Weathertex (SA) | {{hilite | Weathertex (SA) || 2022-October-17 }}]] || style="text-align:center;"| SBS-modified Bituminous || style="text-align:center;"| 1.5 (60) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:WinterGuard Sand|WinterGuard Sand]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:WinterGuard HT|WinterGuard HT]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:WinterGuard Granular |WinterGuard Granular]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:DiamondDeck|DiamondDeck]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:Roofers Select|Roofers Select Underlayment]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:RoofRunner| RoofRunner]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.18 (7) || style="text-align:center;"| 10.45 (23) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]''' || [[Materials:RoofRunner AIR | {{hilite | RoofRunner AIR || 2024-June-15 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.56 (22) || style="text-align:center;"| 15.87 (35) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:PLATINUM (FT Synthetics) |PLATINUM]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
| + | |- | ||
| + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:GOLD (FT Synthetics) |GOLD]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> | ||
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:SILVER (FT Synthetics) |SILVER]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:PLATINUM HT-SA (FT Synthetics) |PLATINUM HT-SA]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 1.04 (41) || style="text-align:center;"| 45 (20) || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:Platinum HT-B (FT Synthetics) |{{hilite | Platinum HT-B || 2023-January-20 }} ]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 1.04 (41) || style="text-align:center;"| 45 (20) || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:HYDRA (FT Synthetics) | HYDRA]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.76 (30) || style="text-align:center;"| 18 (40) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:KOMODO BSA (FT Synthetics) | {{hilite | KOMODO BSA || 2022-February-5 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 1.04 (41) || style="text-align:center;"| 20 (44) || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:Cobalt Ultra (FT Synthetics) |{{hilite | Cobalt Ultra || 2022-February-5 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 1.04 (41) || style="text-align:center;"| 13 (28) || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:FT Pro 20 | {{hilite | FT Pro 20 || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.25 (10) || style="text-align:center;"| 9 (21) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:FT Synthetics | FT Synthetics]]''' || [[Materials:SynTrack | {{hilite | SynTrack || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.20 (8) || style="text-align:center;"| 9 (20) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:Shingle-Mate|Shingle-Mate]] || style="text-align:center;"| Reinforced Organic Felt || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:Stormguard|Stormguard]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 1.02 (40) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:Weather Watch|Weather Watch]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 1.02 (40) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:Deck Armor|Deck Armor]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:FeltBuster|{{hilite | FeltBuster || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| 10.4 (23) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]''' || [[Materials:Tiger Paw | {{hilite | Tiger Paw || 2023-October-28 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| 18 (40) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Garland Canada Inc. | Garland Canada Inc.]]''' || [[Materials:Viking UDL Shingle HG | Viking UDL Shingle HG]] || style="text-align:center;"| polymer/rubberized asphalt adhesive || style="text-align:center;"| 1.40 (55) || style="text-align:center;"| 30.9 || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Garland Canada Inc. | Garland Canada Inc.]]''' || [[Materials:Viking UDL Pro Grade | Viking UDL Pro Grade]] || style="text-align:center;"| polymer/rubberized asphalt adhesive || style="text-align:center;"| 1.40 (55) || style="text-align:center;"| 32.7 || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:HAL Industries Inc. | HAL Industries Inc.]]''' || [[Breathex|Breathex]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Henry Company Canada | Henry Company Canada]]''' || [[Materials:Blueskin PE 200 HT|Blueskin PE 200 HT]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Henry Company Canada | Henry Company Canada]]''' || [[Materials:Blueskin RF 200|Blueskin RF 200]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Henry Company Canada | Henry Company Canada]]''' || [[Materials:Eaveguard|Eaveguard]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials:Roofgard Cool Grey Underlayment|Roofgard Cool Grey Underlayment]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials:SBS Deck Base 44|SBS Deck Base 44]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials:Stormtite|Stormtite]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials: Stormshield Ice and Water Protector (IKO) | {{hilite | Stormshield Ice and Water Protector|| 2022-February-5 }}]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 1.08 (43) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials: 44 Stormshield Ice and Water Protector (IKO)| {{hilite | 44 Stormshield Ice and Water Protector || 2022-February-5 }}]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 1.08 (43) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]''' || [[Materials: Armourgard Ice and Water Protector (IKO)| {{hilite | Armourgard Ice and Water Protector || 2022-February-5 }} ]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 1.4 (53) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:Right Start™ UDL |Right Start™ UDL ]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:Arctic Seal Ice & Water Guard |Arctic Seal Ice & Water Guard]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:1030 SecureStart™ Synthetic Underlayment|1030 SecureStart™]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:Secure Start Plus | {{hilite | Secure Start Plus || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| 13.6 (30) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:Secure Start SG | {{hilite | Secure Start SG || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| 11.3 (25) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]''' || [[Materials:Secure Start Permeable | {{hilite | Secure Start Permeable || 2022-June-17 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| 9.0 (20) || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Deck Defence|Deck Defence]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Weatherlock G|Weatherlock G]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Titanium UDL 25|Titanium UDL 25]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Owens Corning Canada]]''' || [[Materials: | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Titanium UDL 30|Titanium UDL 30]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Owens Corning Canada]]''' || [[Materials: | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Titanium UDL 50|Titanium UDL 50]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Owens Corning Canada]]''' || [[Materials:Titanium | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:Titanium PSU 30 |Titanium PSU 30]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Owens Corning Canada]]''' || [[Materials: | + | || '''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]''' || [[Materials:RhinoRoof U20 |RhinoRoof U20]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Polyglass USA, Inc. | Polyglass USA, Inc.]]''' || [[Materials:Polystick IR-Xe|Polystick IR-Xe]] || style="text-align:center;"| Modified Asphalt || style="text-align:center;"| 1.50 (60) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Polyglass USA, Inc. | Polyglass USA, Inc.]]''' || [[Materials:Polystick MTS|Polystick MTS]] || style="text-align:center;"| Proprietary Compound || style="text-align:center;"| 1.50 (60) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Polyglass USA, Inc. | Polyglass USA, Inc.]]''' || [[Materials:Polystick TU Plus|Polystick TU Plus]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 2.00 (80) || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Protecto Wrap Company | Protecto Wrap Company]]''' || [[Materials:Jiffy Seal Ice and Water Guard HT|Jiffy Seal Ice and Water Guard HT]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Protecto Wrap Company | Protecto Wrap Company]]''' || [[Materials:Jiffy Seal Butyl Ice and Water Guard HT|Jiffy Seal Butyl Ice and Water Guard HT]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]''' || [[Materials:Roofnado AnchorDeck (Sentry) |{{hilite | Roofnado AnchorDeck|| 2022-February-5 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]''' || [[Materials:Roofnado LapLock PSU (HT) (Sentry) | {{hilite | Roofnado LapLock PSU (HT)|| 2022-February-5 }}]] || style="text-align:center;"| Polymeric/Self-adhered underside || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]''' || [[Materials:StormTread XW (Sentry) | {{hilite | StormTread XW|| 2022-February-5 }} ]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Sentry Building Innovations]]''' || [[Materials: | + | || '''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]''' || [[Materials:Sahara | {{hilite | Sahara (underlayment) || 2024-October-20 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Sentry Building Innovations]]''' || [[Materials: | + | || '''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]''' || [[Materials:Sahara AnchorDeck | {{hilite | Sahara AnchorDeck (underlayment) || 2024-October-20 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Siplast|Siplast]]''' || [[Materials:Paradiene 20 EG SA |{{hilite | Paradiene 20 EG SA|| 2021-October-30 }}]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| 3.00 (118) || style="text-align:center;"| 4.1 (9.02) || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Lastoflex |Lastoflex]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Nail-applied || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#d33">'''X'''</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Soprema Inc.]]''' || [[Materials: | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Lastobond 195 |Lastobond 195]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Soprema Inc.]]''' || [[Materials:Lastobond | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Lastobond 240|Lastobond 240]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Soprema Inc.]]''' || [[Materials:Lastobond | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Lastobond Shield|Lastobond Shield]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Soprema Inc.]]''' || [[Materials:Lastobond Shield|Lastobond Shield]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Lastobond Shield HT|Lastobond Shield HT]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[Soprema Inc.]]''' || [[Materials: | + | || '''[[Manufacturers:Soprema Inc. | Soprema Inc.]]''' || [[Materials:Sopraseal Stick 1100|Sopraseal Stick 1100]] || style="text-align:center;"| SBS Modified Bituminous || style="text-align:center;"| N/A || style="text-align:center;"| N/A || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
| − | || '''[[ | + | || '''[[Manufacturers:VaproShield_LLC | VaproShield LLC]]''' || [[Materials:SlopeShield Plus Self-Adhered | {{hilite | SlopeShield Plus Self-Adhered || 2025-January-31 }}]] || style="text-align:center;"| Polymeric || style="text-align:center;"| 0.51 (20) || style="text-align:center;"| 0.447 || Self-adhering || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> || style="text-align:center;"| <span style="color:#228B22"> ✔</span> |
|- | |- | ||
|} | |} | ||
Latest revision as of 17:21, 23 April 2024
Eave protection is used to protect the eave and valley areas of water-shedding roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, eaves extend past the exterior face of the building and are not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows, it forms a barrier that prevents water from draining off the edge of the eaves. The water backs up behind the dam and gradually forces its way under the primary roof covering (asphalt shingles, metal panels, cedar shakes or shingles, etc.), where it warms and melts (the result of heat leakage through discontinuities in the air barrier system). Liquid water then leaks through the roof deck and into the structure. The results can range from minor staining to severe water damage to the structural members.
Eave protection membranes are designed to prevent the water from reaching the deck and leaking into the structure. These materials are self-adhering and manufactured with a rubberized asphaltic compound, or with butyl. Properly formulated and installed, these sheets have the potential to perform a long time. Slope and climate conditions are considerations for selection; refer to the Standard for further information and guidance.
Underlayment is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the roof covering, during weather events that might force water underneath. Refer to Part 8 in the Standard for slope limitations of nail-applied underlayments (not permitted on slopes less than 1:3 (4" in 12").
| Manufacturer | Product Name | Product Type | Product Thickness mm (mil) * |
Product Weight Kg/m2 (lb / 1002 ') |
Application Method | Eaves * | Valleys * | Under- layment |
|---|
| Click up/down arrows to sort | ||||||||
|---|---|---|---|---|---|---|---|---|
| Building Products of Canada Corp. | Gripgard | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Building Products of Canada Corp. | Deckgard | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Building Products of Canada Corp. | ProDeck | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Building Products of Canada Corp. | Suredeck | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Building Products of Canada Corp. | Weathertex (SA) | SBS-modified Bituminous | 1.5 (60) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| CertainTeed LLC | WinterGuard Sand | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| CertainTeed LLC | WinterGuard HT | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| CertainTeed LLC | WinterGuard Granular | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| CertainTeed LLC | DiamondDeck | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| CertainTeed LLC | Roofers Select Underlayment | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| CertainTeed LLC | RoofRunner | Polymeric | 0.18 (7) | 10.45 (23) | Nail-applied | X | X | ✔ |
| CertainTeed LLC | RoofRunner AIR | Polymeric | 0.56 (22) | 15.87 (35) | Nail-applied | X | X | ✔ |
| FT Synthetics | PLATINUM | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| FT Synthetics | GOLD | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| FT Synthetics | SILVER | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| FT Synthetics | PLATINUM HT-SA | Polymeric | 1.04 (41) | 45 (20) | Self-adhering | ✔ | ✔ | ✔ |
| FT Synthetics | Platinum HT-B | Polymeric | 1.04 (41) | 45 (20) | Self-adhering | ✔ | ✔ | ✔ |
| FT Synthetics | HYDRA | Polymeric | 0.76 (30) | 18 (40) | Nail-applied | X | X | ✔ |
| FT Synthetics | KOMODO BSA | Polymeric | 1.04 (41) | 20 (44) | Self-adhering | ✔ | ✔ | ✔ |
| FT Synthetics | Cobalt Ultra | Polymeric | 1.04 (41) | 13 (28) | Self-adhering | ✔ | ✔ | ✔ |
| FT Synthetics | FT Pro 20 | Polymeric | 0.25 (10) | 9 (21) | Nail-applied | X | X | ✔ |
| FT Synthetics | SynTrack | Polymeric | 0.20 (8) | 9 (20) | Nail-applied | X | X | ✔ |
| GAF Canada ULC | Shingle-Mate | Reinforced Organic Felt | N/A | N/A | Nail-applied | X | X | ✔ |
| GAF Canada ULC | Stormguard | SBS Modified Bituminous | 1.02 (40) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| GAF Canada ULC | Weather Watch | SBS Modified Bituminous | 1.02 (40) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| GAF Canada ULC | Deck Armor | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| GAF Canada ULC | FeltBuster | Polymeric | N/A | 10.4 (23) | Nail-applied | X | X | ✔ |
| GAF Canada ULC | Tiger Paw | Polymeric | N/A | 18 (40) | Nail-applied | X | X | ✔ |
| Garland Canada Inc. | Viking UDL Shingle HG | polymer/rubberized asphalt adhesive | 1.40 (55) | 30.9 | Self-adhering | ✔ | ✔ | ✔ |
| Garland Canada Inc. | Viking UDL Pro Grade | polymer/rubberized asphalt adhesive | 1.40 (55) | 32.7 | Self-adhering | ✔ | ✔ | ✔ |
| HAL Industries Inc. | Breathex | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Henry Company Canada | Blueskin PE 200 HT | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Henry Company Canada | Blueskin RF 200 | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Henry Company Canada | Eaveguard | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| IKO Industries Ltd. | Roofgard Cool Grey Underlayment | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| IKO Industries Ltd. | SBS Deck Base 44 | SBS Modified Bituminous | N/A | N/A | Nail-applied | X | X | ✔ |
| IKO Industries Ltd. | Stormtite | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| IKO Industries Ltd. | Stormshield Ice and Water Protector | SBS Modified Bituminous | 1.08 (43) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| IKO Industries Ltd. | 44 Stormshield Ice and Water Protector | SBS Modified Bituminous | 1.08 (43) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| IKO Industries Ltd. | Armourgard Ice and Water Protector | SBS Modified Bituminous | 1.4 (53) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Malarkey Roofing Products | Right Start™ UDL | SBS Modified Bituminous | N/A | N/A | Nail-applied | X | X | ✔ |
| Malarkey Roofing Products | Arctic Seal Ice & Water Guard | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Malarkey Roofing Products | 1030 SecureStart™ | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Malarkey Roofing Products | Secure Start Plus | Polymeric | N/A | 13.6 (30) | Nail-applied | X | X | ✔ |
| Malarkey Roofing Products | Secure Start SG | Polymeric | N/A | 11.3 (25) | Nail-applied | X | X | ✔ |
| Malarkey Roofing Products | Secure Start Permeable | Polymeric | N/A | 9.0 (20) | Nail-applied | X | X | ✔ |
| Owens Corning Canada LP | Deck Defence | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Owens Corning Canada LP | Weatherlock G | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Owens Corning Canada LP | Titanium UDL 25 | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Owens Corning Canada LP | Titanium UDL 30 | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Owens Corning Canada LP | Titanium UDL 50 | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Owens Corning Canada LP | Titanium PSU 30 | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Owens Corning Canada LP | RhinoRoof U20 | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Polyglass USA, Inc. | Polystick IR-Xe | Modified Asphalt | 1.50 (60) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Polyglass USA, Inc. | Polystick MTS | Proprietary Compound | 1.50 (60) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Polyglass USA, Inc. | Polystick TU Plus | SBS Modified Bituminous | 2.00 (80) | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Protecto Wrap Company | Jiffy Seal Ice and Water Guard HT | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Protecto Wrap Company | Jiffy Seal Butyl Ice and Water Guard HT | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Sentry Building Innovations | Roofnado AnchorDeck | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Sentry Building Innovations | Roofnado LapLock PSU (HT) | Polymeric/Self-adhered underside | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Sentry Building Innovations | StormTread XW | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Sentry Building Innovations | Sahara (underlayment) | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Sentry Building Innovations | Sahara AnchorDeck (underlayment) | Polymeric | N/A | N/A | Nail-applied | X | X | ✔ |
| Siplast | Paradiene 20 EG SA | SBS Modified Bituminous | 3.00 (118) | 4.1 (9.02) | Self-adhering | ✔ | ✔ | ✔ |
| Soprema Inc. | Lastoflex | SBS Modified Bituminous | N/A | N/A | Nail-applied | X | X | ✔ |
| Soprema Inc. | Lastobond 195 | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Soprema Inc. | Lastobond 240 | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Soprema Inc. | Lastobond Shield | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Soprema Inc. | Lastobond Shield HT | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| Soprema Inc. | Sopraseal Stick 1100 | SBS Modified Bituminous | N/A | N/A | Self-adhering | ✔ | ✔ | ✔ |
| VaproShield LLC | SlopeShield Plus Self-Adhered | Polymeric | 0.51 (20) | 0.447 | Self-adhering | ✔ | ✔ | ✔ |