Search results

Create the page "Insulation (Waterproofing Systems)" on this wiki! See also the search results found.

Page title matches

Roofs - Insulation (Waterproofing Systems)
<big><big><big><big><big>Roofs: Insulation</big></big></big></big></big> ===Heat-resistant Insulation===

3 KB (377 words) - 21:49, 7 September 2021
Insulation (Grade-level Waterproofing Systems)
{{Template:Materials - Insulation (XPS)}}

485 bytes (56 words) - 14:10, 27 July 2021

Page text matches

Category:5.0 Before Delete
...ally two different things'''''). The binder provides the membrane with its waterproofing capability and may impart the following properties: Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display

0 members (0 subcategories, 0 files) - 16:30, 23 June 2015
Roof Classes
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio Roofing systems are often specified according to the “Class” of roof required.

5 KB (808 words) - 16:06, 9 September 2021
Materials:2-1 SopraSmart ISO HD HP Sanded
;Accepted for application in: Roof Waterproofing Systems ...heet membrane that is factory-laminated to a high-density Polyisocyanurate insulation support panel (SOPRA-ISO PLUS HD). The panel may be installed with hot bit

2 KB (326 words) - 17:20, 16 June 2023
SBS Introduction
...odified bituminous “binder”. The binder provides the membrane with its waterproofing capability and may impart the following properties: Bituminous and modified bituminous flexible membrane systems are composite sheet membranes which are thermoplastic in nature but display

22 KB (3,281 words) - 21:46, 17 July 2017
Materials:Paratherm HD
...roofing Systems (roofs)(high-density insulation overlay) Water-shedding Systems (ASM and Asphalt Shingles) :*is a rigid roof insulation boards comprised of a high-density closed cell polyisocyanurate fo

1 KB (196 words) - 15:40, 27 October 2020
Materials:Paratherm W HD
...roofing Systems (roofs)(high-density insulation overlay) Water-shedding Systems (ASM and Asphalt Shingles) :*is a rigid roof insulation boards comprised of a high-density closed cell polyisocyanurate fo

1 KB (196 words) - 15:42, 27 October 2020
Template:NOTES to SBS Standard
:There are four principal waterproofing assemblies used on roofs; the choice of system may be influenced by the way ::'''''Uninsulated Systems''''' - typically insulated below the ''roof deck''.

30 KB (4,336 words) - 21:13, 18 August 2021
Manufacturers:Elevate
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

3 KB (432 words) - 21:52, 28 March 2024
Template:ROOFTOP GARDENS, PLANTERS & WALKWAYS (EPDM, TPO)
..., TPO, PVC) single ply membranes used for Landscaped and Vegetated roofing systems shall be fully adhered and a minimum thickness of 1.5mm (0.060"). || 2018-J ...tion of, a roof or waterproofing membrane assembly. This excludes thermal insulation but includes, and is not limited to, || 2018-January-25 }}

21 KB (2,722 words) - 14:55, 25 September 2017
Template:ROOFTOP GARDENS, PLANTERS & WALKWAYS (SBS)
..., TPO, PVC) single ply membranes used for Landscaped and Vegetated roofing systems shall be fully adhered and a minimum thickness of 1.5mm (0.060"). || 2018-J {{hilite | For roof membrane systems insulated above the membrane (Protected Membrane Roof assemblies), refer to

21 KB (2,856 words) - 22:57, 9 November 2018
Template:All Systems - INSULATION
Only RoofStar-accepted insulation materials, specifically listed by membrane manufacturers in this Manual as ...be installed under two (2) offset / staggered layers of RoofStar-accepted insulation overlay boards.

14 KB (2,160 words) - 15:21, 29 September 2016
Template:All systems - ROOF DECKS
...ree of "humps" or depressions. These can counteract any sloped insulation systems installed by the roofing contractor and cause ponding. On new construction ...vel in the roof deck are less than the percentage of slope provided by the insulation. A minimum slope of 1:50 (1/4" in 12") is

20 KB (3,072 words) - 15:18, 15 January 2019
Material Classification and Application for Acceptance
...aterials used in the construction of ''waterproofing'' or ''water-shedding systems'' must be accepted by the '''''RGC'''''. Refer to other resources on this :<big>'''Acceptance Criteria for Roof Waterproofing System materials'''</big>

22 KB (3,050 words) - 16:20, 12 December 2023
SBS Modified Bitumen Application Guides and Notes
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio ...the latest in the evolution of bituminous roofing systems. However, some systems require that applicators use a propane-fuelled open flame torch to adhere t

14 KB (2,333 words) - 16:39, 9 February 2022
Accepted Materials - SBS Modified Bitumen Membrane Systems
...bc.org/index.php?title=Low_Slope_Membrane_Roofs '''Low Slope Membrane Roof Systems''']. This cross-reference is listed for information only. .../index.php?title=Standard_for_SBS-Modified_Bitumen_Membrane_Systems#PART_7 Insulation]===

6 KB (742 words) - 20:36, 27 July 2021
(Draft) PVC Roof Systems Standard
<big>Waterproofing Roof Systems: Thermosplastic Membranes</big> <big><big><big><big><big><big>Standard for PVC Membrane Roof Systems</big></big></big></big></big></big>

416 KB (56,532 words) - 22:23, 5 April 2024
(Draft) EPDM Roof Systems Standard
<big>Waterproofing Roof Systems: Thermoset Membranes</big> <big><big><big><big><big><big>Standard for EPDM Membrane Roof Systems</big></big></big></big></big></big>

424 KB (57,418 words) - 22:20, 5 April 2024
(Draft) TPO Roof Systems Standard
<big>Waterproofing Roof Systems: Thermosplastic Membranes</big> <big><big><big><big><big><big>Standard for TPO Membrane Roof Systems</big></big></big></big></big></big>

421 KB (57,062 words) - 22:20, 5 April 2024
(Draft) Hot Rubber Roof Systems Standard
<big>Waterproofing Roof Systems: Liquid Membranes</big> ...<big><big><big><big>Standard for Hot Fluid-applied Rubberized Asphalt Roof Systems</big></big></big></big></big></big>

296 KB (41,811 words) - 22:23, 5 April 2024
Materials by Product Category
<tab name="Materials for Waterproofing Roof Systems"> ::<big>[[Waterproofing Systems (Roofs): Hybrid Bituminous EPDM Membranes |Hybrid EPDM Membranes]]</big>

13 KB (1,636 words) - 17:02, 5 January 2024
Roof Decks
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio ...ree of "humps" or depressions. These can counteract any sloped insulation systems installed by the roofing contractor and cause ponding. On new construction

20 KB (2,969 words) - 16:06, 9 September 2021
Requirements
When any portion of a waterproofing system is installed with heat, the work is classified as Hot Work. Some to ==Contractor Qualifications for Roof and Grade-level Waterproofing==

11 KB (1,608 words) - 22:03, 3 May 2021
Structure and Organization of RPM and Standards
...Systems''', '''Water-shedding Systems''', and '''Grade-level Waterproofing Systems'''. Explanatory notes may be incorporated at the end of each Standard. ...Waterproofing Roof Systems" is a Group; "Polymer-modified Bitumen Membrane Systems" is a System type). Each Standard published in the RPM is an arrangement o

15 KB (2,132 words) - 19:02, 18 August 2023
Insulating the Roof
[[File:Low-slope Roof Insulation.jpg|300 px]] ...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio

23 KB (3,279 words) - 15:42, 9 September 2021
Waterproofing Systems: Leak Detection & Monitoring Systems
...b> and shall be installed on the top surface of all waterproofing membrane systems designed with inaccessible overburdens and wearing courses. The exceptions ...terproofing membranes, testing shall be conducted prior to installation of insulation and overburdens and be performed to ASTM D5957 - 98.

2 KB (249 words) - 22:45, 9 November 2016
Insulation Joints and Overlays
<big><big><big><big><big>Insulation Joints and Overlays</big></big></big></big></big> ...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio

4 KB (532 words) - 15:44, 9 September 2021
Materials:Perma-Board
...ish or a sanded finish. PERMA-BOARD is compatible with all asphalt roofing systems and is unaffected by moisture and will not rot. ...may be heat welded or hot mopped directly to PERMA-BOARD, creating a thick waterproofing layer. The asphalt board becomes an integral part of the roof membrane maki

3 KB (361 words) - 22:21, 3 November 2016
Fasteners
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio ...materials due to thermal and moisture variations. Traditionally, the roof insulation and roofing are secured to the roof deck by means of mechanical fastening,

7 KB (999 words) - 15:42, 9 September 2021
BUR Materials
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio ...heat and reverting to more solid material as they cool. Their adhesive and waterproofing properties have been utilized in construction for hundreds of years. The mo

15 KB (2,293 words) - 15:33, 9 September 2021
Protected and Modified Protected Roof Systems
<big><big><big><big><big>Protected and Modified Protected Roof Systems</big></big></big></big></big> ...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio

11 KB (1,624 words) - 16:21, 9 September 2021
SBS Protected Roof Assembly (typical)
;(1) [[SBS Roof Systems Standard#PART_9|'''Base Membrane (field)''']]: See Tables '''9.1''' and ''' ...flashing must extend up the vertical plane, and above the ''Finished Roof/Waterproofing Surface'', at least 200 mm (8”), and must extend onto the roof field at l

5 KB (661 words) - 17:37, 27 October 2023
Roof Maintenance
...ata is also included on flexible membrane (“non-conventional”) systems as applicable. * Insulation to replace any wet materials discovered in cuts

75 KB (11,617 words) - 21:00, 3 September 2021
Glossary
...roofing materials and components, such as single-ply membranes, flashings, insulation boards, etc. Before adhesives are applied, their compatibility with other ...urement (for more on this subject, refer to Article 3.1.3.4. in any of the waterproofing roof Standards for sheet membrane roofs, published in Division B of the RPM

76 KB (11,565 words) - 18:09, 26 January 2024
Bibliography
Built-Up Roofing Systems Design Guide. Rockville, MA: The Asphalt Roofing Manufacturers Associat Design and Specification of Roofing Systems. Englewood, CO: Roofing Industry Educational Institute, Seminar Manual.

4 KB (548 words) - 14:32, 18 August 2023
Accepted Materials - EPDM Membrane Systems
=== [[RoofStar Guarantee Standards for EPDM Membrane Systems#EPDMVAPOUR|Air and Vapour Control]] === ...bc.org/index.php?title=Low_Slope_Membrane_Roofs '''Low Slope Membrane Roof Systems''']. This cross-reference is listed for information only.

5 KB (633 words) - 20:30, 26 July 2021
Accepted Materials - TPO Membrane Systems
=== [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOVAPOUR|Air and Vapour Control]] === ...bc.org/index.php?title=Low_Slope_Membrane_Roofs '''Low Slope Membrane Roof Systems''']. This cross-reference is listed for information only.

5 KB (614 words) - 20:30, 26 July 2021
Materials:Foamular 404 (Type 4)
...sulation that is specifically designed to provide high quality, economical insulation for conventional roofs, with single-ply, two-ply or four-ply roof membranes ...ilitating the flow of water infiltrated under the insulating boards to the waterproofing system's surface and drains.

3 KB (353 words) - 17:41, 13 October 2016
Materials:Foamular 604 (Type 4)
...sulation that is specifically designed to provide high quality, economical insulation for conventional roofs, with single-ply, two-ply or four-ply roof membranes ...ilitating the flow of water infiltrated under the insulating boards to the waterproofing system's surface and drains.

3 KB (353 words) - 17:42, 13 October 2016
Materials:Foamular 404RB (Type 4)
...sulation that is specifically designed to provide high quality, economical insulation for conventional roofs, with single-ply, two-ply or four-ply roof membranes ...ilitating the flow of water infiltrated under the insulating boards to the waterproofing system's surface and drains.

3 KB (353 words) - 17:42, 13 October 2016
Materials:Foamular 604RB (Type 4)
...sulation that is specifically designed to provide high quality, economical insulation for conventional roofs, with single-ply, two-ply or four-ply roof membranes ...ilitating the flow of water infiltrated under the insulating boards to the waterproofing system's surface and drains.

3 KB (353 words) - 17:42, 13 October 2016
Materials:3-1 SopraSmart Rock
;Accepted for application in: Roof Waterproofing Systems ...density mineral wool (stone wool) support panel and on a polyisocyanurate insulation board (SOPRA-ISO).

1 KB (201 words) - 22:05, 28 June 2021
Securing the Roof Assembly
...cated from Part 3 of the ''Standard for SBS-modified Bitumen Membrane Roof Systems'', located in [[Division B | '''Division B: Standards''']], and is largely ...applies to all new roofs, and to both full and partial replacement ''roof systems''|| 2021-October-30 }}.

55 KB (7,359 words) - 21:22, 3 October 2023
Materials:ISOGARD CG
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems ...nts an improvement to the product; Resista was rated as a Type 1 "Polyiso" insulation (compressive strength: 138 kPa), while ISOGARD CG can now be classified as

2 KB (298 words) - 21:03, 19 June 2023
Materials:H-Shield CG
...pted for application in: All Roof Waterproofing Systems and Water-shedding Systems ...ximum thermal efficiency. Hunter Panels Polyisocyanurate '''H-Shield CG''' insulation is UL and FM approved as a system component in certain roofing assemblies.

2 KB (220 words) - 18:51, 28 June 2021
Materials:H-Shield HD
;Accepted for application in: Roof Waterproofing Systems ...ct Summary: Polyisocyanurate '''H-Shield CG''' is a high-density foam core insulation overlay board covered on both sides with a medium weight fiber-glass reinfo

1 KB (170 words) - 18:55, 28 June 2021
Template:PERIMETER FLASHINGS - METAL (EPDM, TPO)
...rsion in water with the exception of protected and modified protected roof systems. ...ue to the elements and from mechanical damage. The metal flashing is not a waterproofing membrane, therefore the roofing membrane should be continuous under the met

12 KB (1,696 words) - 22:01, 7 March 2018
Manufacturers:Carlisle SynTec Systems Canada
<big><big><big><big><big>Carlisle SynTec Systems Canada</big></big></big></big></big> <big><big>'''Waterproofing Roofs'''</big></big>

4 KB (472 words) - 16:22, 31 October 2023
Template:PERIMETER FLASHINGS - METAL (SBS)
...rsion in water with the exception of protected and modified protected roof systems. ...ue to the elements and from mechanical damage. The metal flashing is not a waterproofing membrane, therefore the roofing membrane should be continuous under the met

10 KB (1,482 words) - 22:00, 7 March 2018
Template:All Systems - Protected and Modified Protected Membranes
...ng to CAN / CGSB-51.20-M87, Type 4) is the only commercially produced roof insulation suitable for a PMRA, providing properties such as water resistance (i.e. re ...ne as well as on top. This may offer cost savings as only the top layer of insulation requires ballast and the bottom layer (mechanically-fastened or adhered) ne

9 KB (1,317 words) - 14:38, 24 August 2017
Manufacturers:HAL Industries Inc.
<big><big>'''Waterproofing Roofs'''</big></big> <big><big>'''Waterproofing Roofs'''</big></big>

3 KB (449 words) - 14:48, 8 June 2023
Manufacturers:IKO Industries Ltd.
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

8 KB (993 words) - 20:26, 20 March 2024
Manufacturers:Johns Manville Corporation
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

3 KB (405 words) - 20:43, 8 June 2023
Manufacturers:Siplast, Inc.
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

11 KB (1,293 words) - 20:23, 20 March 2024
Genflex Roofing Systems LLC
==== [[Roof Deck Insulation]] ==== :'''Tapered Insulation'''

2 KB (254 words) - 17:18, 6 June 2016
Grace Construction Products
==== [[Roof Deck Insulation]] ==== :'''Tapered Insulation'''

2 KB (254 words) - 17:18, 6 June 2016
Manufacturers:Polyglass USA, Inc.
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

6 KB (824 words) - 19:17, 1 February 2024
Main Page Div
...and specification writers designing or applying roofing and waterproofing systems, and describes the RoofStar Guarantee Standards, Guiding Principles and Rec :[[Insulation Joints and Overlay|Insulation Joints and Overlay Boards]]

7 KB (990 words) - 20:54, 2 August 2016
Grade-level Waterproofing Standard
<big><big><big><big><big>Standard for Grade-level Waterproofing Systems</big></big></big></big></big> =ABOUT WATERPROOFING=

117 KB (13,071 words) - 18:36, 5 April 2024
Accepted Materials - Grade-level Waterproofing
...shall be installed over steel decks as an acceptable substrate for adhered waterproofing membranes when cast in place concrete topping is not present. The first lay ...Guarantee Standards for Waterproofing|'''RoofStar Guarantee Standards for Waterproofing''']]:

7 KB (968 words) - 20:34, 26 July 2021
Template:GARDENS, PLANTERS & WALKWAYS (Waterproofing)
..., TPO, PVC) single ply membranes used for Landscaped and Vegetated roofing systems shall be fully adhered and a minimum thickness of 1.5mm (0.060"). ...oot intrusion barrier, and drainage layer. Tightly butt all protection and insulation boards, overlap all filter mat seams and seal all laps of roof intrusion ba

7 KB (1,036 words) - 15:41, 20 July 2018
Template:PERIMETER FLASHINGS - METAL (WP)
...water with the exception of protected and modified protected waterproofing systems. || 2016-October-22 }} ...ue to the elements and from mechanical damage. The metal flashing is not a waterproofing membrane, therefore the roofing membrane should be continuous under the met

9 KB (1,399 words) - 22:09, 21 October 2016
Materials:SecurShield
;'''Manufacturer''': [https://www.carlislesyntec.com/ '''Carlisle Syntec Systems Canada'''] ;Accepted for application in: Roof Waterproofing Systems

2 KB (262 words) - 18:30, 28 June 2021
Materials:Sopraseal Stick 1100 T
...woven polyethylene is compatible for the use of sprayed polyurethane foam insulation. The underface is covered with a silicone release paper or film. .... It is also used as masonry and through wall flashing membrane as well as waterproofing membrane at openings and transitions. SOPRASEAL STICK 1100 T can also be us

2 KB (260 words) - 19:13, 28 November 2016
Siplast SBS Membrane Installation Guidelines
...#8221; and “Teranap” series are Siplast’s major membrane systems, with a number of speciality membranes designed to extend their range of ap #* the waterproofing system

22 KB (3,408 words) - 18:30, 9 November 2016
Soprema SBS Membrane Installation Guidelines
...nd “Elastophene” membranes, and the High Performance Composite systems, all tough, flexible SBS polymer modified bitumen prefabricated sheets, app ...es, bonding adjacent sheets and flashing plies to form an integral roofing/waterproofing system.

14 KB (2,024 words) - 18:30, 9 November 2016
Malarkey SBS Membrane Installation Guidelines
...ne torch or cold-process adhesives in all types of roofing / waterproofing systems. ...d 2-ply (or more) system on flat, curved or domed roofs over most types of insulation.

8 KB (1,192 words) - 19:52, 7 November 2016
IKO SBS Membrane Installation Guidelines
The main components of the roofing and waterproofing systems are the TORCHFLEX and MODIFLEX membranes: tough, flexible, SBS polymer modi ...nding the adjacent sheets and flashing plies to form an integral roofing / waterproofing system.

11 KB (1,543 words) - 18:21, 9 November 2016
IKO SBS Waterproofing Installation Guidelines
Product Group: SBS MODIFIED BITUMINOUS WATERPROOFING MEMBRANES The main components of the waterproofing systems are the TORCHFLEX and MODIFLEX membranes: tough, flexible, SBS polymer modi

8 KB (1,205 words) - 18:26, 9 November 2016
Henry Company SBS Membrane Installation Guidelines
The main components of the roofing and waterproofing systems are bitumen modified with SBS (Styrene Butadiene Styrene) and either fibreg # For use in “protected membrane” applications under insulation.

12 KB (1,673 words) - 19:42, 7 November 2016
Firestone SBS Membrane Installation Guidelines
...ed bitumen to produce roof membranes designed for use in a variety of roof systems. Firestone manufacturers a variety of membranes, each of which is designed ::* Waterproofing

21 KB (3,147 words) - 19:39, 7 November 2016
GAF BUR Installation Guidelines
Product Group: BUILT-UP ROOFING SYSTEMS EXPOSED MEMBRANES, INSULATED ...hot steep roofing asphalt; apply to any prepared roof substrate or roofing insulation suitable for hot applied roofing asphalt, or to a mechanically attached bas

25 KB (3,685 words) - 16:52, 4 November 2016
Carlisle EPDM Membrane Installation Guidelines
Manufacturer: CARLISLE SYNTEC SYSTEMS CANADA ...c membrane is the key component used in Carlisle roofing and waterproofing systems. The membrane is applied in large sheets to reduce field seams. Exceptional

30 KB (4,433 words) - 22:21, 7 November 2016
Johns Manville EPDM Membrane Installation Guidelines
...rane is the key component used in Johns Manville roofing and waterproofing systems. The membrane is applied in large sheets to reduce field seams. Exceptional ...fing Systems, Ballasted Roofing Systems; and Mechanically Fastened Roofing Systems.

20 KB (3,027 words) - 23:04, 7 November 2016
Template:Part 14 - SBS
:;''Extensive Vegetated Roof Systems'': sometimes referred to as "eco-roofs", 'low-profile green roofs," "roofto ...t is situated on top of, and covering all or a portion of, a constructed ''waterproofing system''. ''Overburden'' includes, without limitation,

32 KB (4,724 words) - 17:43, 16 November 2021
Template:DRAFT SBS Section 1 GENERAL
<li>To qualify for a '''''RoofStar 15-year (Waterproofing Roofs) Guarantee''''', the following standards apply: ...enance || 2022-February-5 }} ([[Standard for SBS-Modified Bitumen Membrane Systems#Accessibility_for_Maintenance | 1.3.3]]).

28 KB (3,908 words) - 15:24, 4 August 2021
Sarnafil PVC Membrane Installation Guidelines
The main component of the roofing and waterproofing systems is the Sarnafil Membrane, a tough flexible polyvinyl chloride (PVC) sheet, ...-laid roofing membrane under gravel ballast and in protected membrane roof systems.

42 KB (6,360 words) - 18:54, 9 November 2016
Sarnafil PVC Waterproofing Installation Guidelines
Product Group: POLYVINYL CHLORIDE WATERPROOFING MEMBRANES The main component of the waterproofing systems is the Sarnafil Membrane, a tough flexible polyvinyl chloride (PVC) sheet,

22 KB (3,157 words) - 18:55, 9 November 2016
GAF APP Membrane Installation Guidelines
...s are mopped applied or mechanically fastened to the prepared substrate or insulation. ...oratories: Class A, B and C Flame Resistance, “Roofing Materials and Systems Directory”, 2001 Edition.

36 KB (5,546 words) - 18:22, 8 November 2016
Waterproofing Guide Specifications (2-Ply SBS Membrane Systems)
PROJECT NO. (OPTIONAL) Modified Bituminous Sheet Waterproofing ...tion for two ply SBS modified bituminous membranes in a protected membrane waterproofing system.

23 KB (2,972 words) - 19:49, 9 November 2016
Waterproofing Guide Specifications (PVC Membrane Systems)
...nts for polyvinyl chloride (PVC) waterproofing in protected membrane (PMR) systems. ::.2 RGC Guarantee Standards [E Waterproofing].

18 KB (2,262 words) - 19:50, 9 November 2016
Waterproofing Guide Specifications (Butyl Membrane Systems)
...for Butyl (IIR) Sheet Membrane waterproofing in a protected membrane (PMR) systems. ::.2 RGC Guarantee Standards [E Waterproofing].

19 KB (2,419 words) - 19:52, 9 November 2016
Waterproofing Guide Specifications (Hot-applied Rubberized Asphalt Waterproofing Systems)
APPLIED RUBBERIZED ASPHALT WATERPROOFING ...lied rubberized asphalt (HARA) waterproofing in a protected membrane (PMR) systems.

18 KB (2,332 words) - 19:53, 9 November 2016
Detec Systems Guide Specifications
<big>Guide Specification - Membrane Moisture Survey Systems</big> Refer to the following Membrane Moisture Survey Systems for the manufacturer's individual proprietary guide specifications when dev

12 KB (1,634 words) - 22:57, 9 November 2016
SMT Guide Specifications
<big>Guide Specification - Membrane Moisture Survey Systems</big> Refer to the following Membrane Moisture Survey Systems for the manufacturer's individual proprietary guide specifications when dev

12 KB (1,693 words) - 22:58, 9 November 2016
Template:ROOFTOP EQUIPMENT & WALKWAYS (BUR)
..., TPO, PVC) single ply membranes used for Landscaped and Vegetated roofing systems shall be fully adhered and a minimum thickness of 1.5mm (0.060"). || 2018-J {{hilite | For roof membrane systems insulated above the membrane (Protected Membrane Roof assemblies), refer to

22 KB (3,002 words) - 14:56, 25 September 2017
Template:BUR - ROOF DECKS
...ree of "humps" or depressions. These can counteract any sloped insulation systems installed by the roofing contractor and cause ponding. On new construction ...vel in the roof deck are less than the percentage of slope provided by the insulation. A minimum slope of 1:50 (1/4" in 12") is

21 KB (3,117 words) - 22:49, 10 November 2016
Template:PERIMETER FLASHINGS - METAL (BUR)
...rsion in water with the exception of protected and modified protected roof systems. ...ue to the elements and from mechanical damage. The metal flashing is not a waterproofing membrane, therefore the roofing membrane should be continuous under the met

10 KB (1,568 words) - 22:02, 7 March 2018
Template:ASM Guarantee Standards
:'''<big>ARCHITECTURAL CONCEALED FASTENER METAL ROOFING SYSTEMS ONLY</big>''' ...metal panels may also be designed for use as structural (spanning member) systems, only their use as an architectural metal panel system (over solid deck) is

95 KB (14,221 words) - 18:16, 19 September 2023
Template:Waterproofing Only - Protected Membranes
...ng to CAN / CGSB-51.20-M87, Type 4) is the only commercially produced roof insulation suitable for a PMA, providing properties such as water resistance (i.e. res ...ng, the insulation is to be applied loose with a permeable fabric over the insulation.

8 KB (1,153 words) - 18:04, 23 May 2017
Mock-up of SBS-Modified Bitumen Membrane Systems page
:[[File:SBS Systems page thumb.JPG | link=http://rpm.rcabc.org/images/6/62/SBS_Systems_page_thu ...ems_(revised)<big>{{hilite | '''Standard for SBS-Modified Bitumen Membrane Systems'''</big> || 2020-October-21 }}]

3 KB (424 words) - 13:52, 27 August 2021
Accepted Materials - PVC Membrane Systems
=== [[RoofStar Guarantee Standards for PVC Membrane Systems#PVCVAPOUR|Air and Vapour Control]] === ...bc.org/index.php?title=Low_Slope_Membrane_Roofs '''Low Slope Membrane Roof Systems''']. This cross-reference is listed for information only.

5 KB (611 words) - 20:30, 26 July 2021
Template:Part 1 (Waterproofing Roofs - SBS)
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

37 KB (5,263 words) - 18:02, 12 November 2021
Template:Part 2 (Waterproofing Roofs - SBS)
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

27 KB (3,843 words) - 16:12, 15 October 2021
Template:Part 1 - SBS
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

38 KB (5,288 words) - 17:30, 22 November 2021
Template:Part 1 (Waterproofing Roofs - EPDM)
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,946 words) - 18:01, 12 November 2021
Template:Part 1 (Waterproofing Roofs - Single Ply)
...}} System''|| 2020-February-3 }}: {{hilite | means the top surface of a ''Waterproofing System'' or ''Water-shedding System'' that may include ballast or ''Overbur :;''Project'': means the designed or constructed ''Waterproofing System'' or ''Water-shedding System''.

40 KB (5,809 words) - 18:25, 4 February 2021
Template:Part 3 (Waterproofing Roofs - SBS)
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

54 KB (7,505 words) - 18:08, 12 November 2021
Materials:FleeceBACK RL EPDM
<big><big><big>by Carlisle SynTec Systems Canada</big></big></big> ;Accepted for application in: Roof Waterproofing Systems

3 KB (361 words) - 18:56, 31 October 2023
Materials:FleeceBACK RL TPO
<big><big><big>by Carlisle SynTec Systems Canada</big></big></big> ;Accepted for application in: Roof Waterproofing Systems

3 KB (363 words) - 18:56, 31 October 2023
Materials:FleeceBACK RL PVC
<big><big><big>by Carlisle SynTec Systems Canada</big></big></big> ;Accepted for application in: Roof Waterproofing Systems

3 KB (365 words) - 18:57, 31 October 2023
Materials:SecurShield RapidLock (RL) Polyiso Insulation
<big><big><big><big><big>SecurShield RapidLock (RL) Polyiso Insulation</big></big></big></big></big> <big><big><big>by Carlisle SynTec Systems Canada</big></big></big> 

2 KB (317 words) - 18:51, 24 October 2023
Materials:SecurShield RapidLock (RL) HD Polyiso Insulation
<big><big><big><big><big>SecurShield RapidLock (RL) HD Polyiso Insulation</big></big></big></big></big> <big><big><big>by Carlisle SynTec Systems Canada</big></big></big> 

2 KB (318 words) - 18:50, 24 October 2023
Template:Part 2 (Waterproofing Roofs - Single Ply)
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

27 KB (3,807 words) - 16:12, 15 October 2021
Template:Part 13 (Waterproofing Roofs)
...thetic finish to the ''roof system''. ''Linear metal flashings'' are not a waterproofing component. Consequently, the roofing membrane should be continuous beneath ...metal flashings. RoofStar-accepted pre-engineered products are accepted as systems and therefore the requirements in this Part for metal gauge, profile, secur

28 KB (4,147 words) - 19:33, 12 November 2021
Template:Part 8 (Waterproofing Roofs - SBS)
...Insulation overlay boards are installed in most ''Conventionally Insulated Systems'' to <li>protect ''heat-sensitive insulation'' materials from damage by heat and flame.

10 KB (1,336 words) - 13:49, 14 April 2021
Notes to Asphalt Shingle Standard
<big><big><big><big><big>Notes to Standard for Asphalt Shingle Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

27 KB (3,999 words) - 15:35, 14 November 2023
(Draft) Notes to EPDM Standard
<big><big><big><big><big>Notes to Standard for EPDM Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

59 KB (8,538 words) - 18:07, 2 April 2024
Template:Part 11 (Waterproofing Roofs - Singleply)
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...(see '''7.1.2.10'''). Sumps designed with sloped insulation are strongly recommended.

42 KB (6,354 words) - 15:16, 15 July 2020
Template:Part 12 (Waterproofing Roofs - Single Ply)
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again <li>a drainage layer beneath XPS insulation.

14 KB (2,184 words) - 19:32, 12 November 2021
Template:Part 14 (Waterproofing Roofs)
:;''Extensive Vegetated Roof Systems'': sometimes referred to as "eco-roofs", 'low-profile green roofs," "roofto ...t is situated on top of, and covering all or a portion of, a constructed ''waterproofing system''. ''Overburden'' includes, without limitation,

31 KB (4,708 words) - 19:34, 12 November 2021
(Draft) Grade-level Waterproofing Standard
<big><big><big><big><big>Standard for Grade-level Waterproofing Systems</big></big></big></big></big> =ABOUT WATERPROOFING=

117 KB (13,068 words) - 18:35, 5 April 2024
Notes to ASM Standard
...><big><big><big>Notes to Standard for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

32 KB (4,655 words) - 13:53, 9 April 2024
Materials:Sopra-Iso Plus HD
;Accepted use: Waterproofing Systems (roofs) ...ane support on low slope roofs. It can be installed on plywood or on rigid insulation.

2 KB (240 words) - 17:26, 14 February 2020
Template:Part 3 (Waterproofing Roofs - Single Ply)
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

54 KB (7,486 words) - 18:09, 12 November 2021
Associate Member Page Template
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

7 KB (897 words) - 18:41, 8 June 2023
Template:Part 1 - EPDM
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,973 words) - 17:30, 22 November 2021
Template:Part 12 - SBS
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again ##a drainage layer beneath XPS insulation.

14 KB (2,169 words) - 15:17, 23 February 2022
Template:Part 3 - SBS
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

55 KB (7,522 words) - 23:07, 8 March 2022
Template:Part 2 - SBS
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

25 KB (3,617 words) - 14:49, 23 December 2021
(Draft) Notes to TPO Standard
<big><big><big><big><big>Notes to Standard for TPO Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

57 KB (8,227 words) - 18:02, 2 April 2024
(Draft) Notes to PVC Standard
<big><big><big><big><big>Notes to Standard for PVC Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

57 KB (8,227 words) - 18:07, 2 April 2024
(Draft) Notes to ASM Standard
...><big><big><big>Notes to Standard for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

31 KB (4,535 words) - 15:47, 27 October 2023
(Draft) Notes to Asphalt Shingle Standard
<big><big><big><big><big>Notes to Standard for Asphalt Shingle Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

27 KB (3,996 words) - 15:35, 14 November 2023
Template:Part 2 - EPDM
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

25 KB (3,582 words) - 14:49, 23 December 2021
Template:Part 9 - SBS
...ecified ''system'' and may be required or simply is prudent for additional waterproofing protection in certain circumstances. <li>accepted concrete-topped XPS insulation panels.

59 KB (6,024 words) - 17:30, 15 June 2022
Template:Part 14 - EPDM
:;''Extensive Vegetated Roof Systems'': sometimes referred to as "eco-roofs", 'low-profile green roofs," "roofto ...t is situated on top of, and covering all or a portion of, a constructed ''waterproofing system''. ''Overburden'' includes, without limitation,

32 KB (4,724 words) - 17:44, 16 November 2021
Template:Part 12 - EPDM
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again <li>a drainage layer beneath XPS insulation.

14 KB (2,184 words) - 18:04, 15 November 2021
Template:Part 13 - EPDM
...thetic finish to the ''roof system''. ''Linear metal flashings'' are not a waterproofing component. Consequently, the roofing membrane should be continuous beneath ...metal flashings. RoofStar-accepted pre-engineered products are accepted as systems and therefore the requirements in this Part for metal gauge, profile, secur

28 KB (4,147 words) - 21:42, 27 April 2022
Template:Part 13 - SBS
...thetic finish to the ''roof system''. ''Linear metal flashings'' are not a waterproofing component. Consequently, the roofing membrane should be continuous beneath ...metal flashings. RoofStar-accepted pre-engineered products are accepted as systems and therefore the requirements in this Part for metal gauge, profile, secur

28 KB (4,147 words) - 21:41, 27 April 2022
Template:Part 10 - SBS
...ority'' is responsible to specify {{hilite | the connections between the ''waterproofing'' or ''water-shedding system'' and ''walls'' or other building components, ...all finish must be installed at least 89 mm (3 ½”) above the ''finished waterproofing system''.

48 KB (6,869 words) - 22:24, 9 December 2021
Template:Part 11 - SBS
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the ''drainage plane'' may affect the determi

56 KB (8,120 words) - 20:44, 19 May 2022
Template:Part 11 - EPDM
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the ''drainage plane'' may affect the determi

45 KB (6,830 words) - 19:36, 11 March 2022
Template:Part 10 - EPDM
...ority'' is responsible to specify {{hilite | the connections between the ''waterproofing'' or ''water-shedding system'' and ''walls'' or other building components, ...all finish must be installed at least 89 mm (3 ½”) above the ''finished waterproofing system''.

36 KB (5,070 words) - 14:52, 17 November 2021
Template:Part 12 (Waterproofing Roofs - SBS)
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again ##a drainage layer beneath XPS insulation.

14 KB (2,171 words) - 19:31, 12 November 2021
Template:Part 11 (Waterproofing Roofs - Single Ply)
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the drainage plane may affect the determinati

45 KB (6,811 words) - 20:28, 9 July 2021
Template:Part 9 (Waterproofing Roofs - SBS)
...ecified ''system'' and may be required or simply is prudent for additional waterproofing protection in certain circumstances. <li>accepted concrete-topped XPS insulation panels.

58 KB (5,958 words) - 18:24, 12 November 2021
Template:Part 11 (Waterproofing Roofs - SBS)
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the drainage plane may affect the determinati

56 KB (8,117 words) - 15:53, 27 August 2021
Working Page 5
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

6 KB (821 words) - 19:14, 31 January 2024
Working Page 8
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

8 KB (1,008 words) - 22:38, 30 January 2024
Materials:Polyboard 180 Combo
...g Roof Systems Grade-level Waterproofing Systems Water-shedding Roof Systems ...S SHEET MEMBRANES Used in Roof Waterproofing and Grade-level Waterproofing Systems) (for membrane only)

2 KB (348 words) - 19:38, 31 January 2024
Materials:Duro-Guard EPS Type II
;Accepted for application in: Waterproofing Roof Systems ...ct Summary: '''Duro-Guard EPS Type II''' is a Type II Expanded Polystyrene insulation panels.

2 KB (240 words) - 21:01, 31 January 2024
Materials:Duro-Guard EPS Fiberglass Facer
...g Roof Systems Grade-level Waterproofing Systems Water-shedding Roof Systems ...y: '''Duro-Guard EPS Fiberglass Facer''' is a Type II expanded polystyrene insulation laminated to a fibreglass facer.

2 KB (259 words) - 21:00, 31 January 2024
Materials:Duro-Guard ISO III CG
;Accepted for application in: Waterproofing Roof Systems ...'''Duro-Guard® ISO III CG''' is a closed-cell Polyisocyanurate foam core insulation board with an integrally laminated, heavy, durable, and dimensionally stabl

2 KB (264 words) - 21:04, 31 January 2024
Materials:Duro-Guard ISO HD
;Accepted for application in: Waterproofing Roof Systems ...® ISO HD''' is a 12.7 mm (1/2") thick high density Polyisocyanurate insulation panel specifically designed for use as a cover/recover board. It is manufac

2 KB (265 words) - 21:10, 31 January 2024
Materials:Duro-Guard ISO HD Composite Coated
...g Roof Systems Grade-level Waterproofing Systems Water-shedding Roof Systems ...aminated during the manufacturing process to Duro-Guard ISO III rigid roof insulation. R-value is optimized with a thinner profile.

2 KB (279 words) - 21:13, 31 January 2024
Materials:Duro-Guard ISO HD-MA
;Accepted for application in: Waterproofing Roof Systems ...gned for use as a cover/recover board within mechanically fastened roofing systems only. It is manufactured on-line with an integrally laminated, fiber-reinfo

2 KB (271 words) - 21:13, 31 January 2024
Template:Part 3 - EPDM
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

55 KB (7,513 words) - 20:13, 22 April 2022
Template:Part 1 (Waterproofing Roofs - PVC)
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,946 words) - 17:05, 20 September 2021
(Draft) Notes to SBS Standard
...ig><big><big><big>Notes to Standard for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

61 KB (8,812 words) - 18:01, 2 April 2024
Template:Part 1 (Waterproofing Roofs - TPO)
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,946 words) - 17:04, 20 September 2021
Template:Part 8 (Waterproofing Roofs - Single Ply)
...Insulation overlay boards are installed in most ''Conventionally Insulated Systems'' to <li>protect ''heat-sensitive insulation'' materials from damage by heat and flame.

9 KB (1,275 words) - 21:22, 1 September 2021
Materials:SecurShield HD
;'''Manufacturer''': [https://www.carlislesyntec.com/ '''Carlisle Syntec Systems Canada'''] ;Accepted for application in: Roof Waterproofing Systems

2 KB (259 words) - 18:19, 28 June 2021
Roof Membranes
...formation page only. To read the standards applicable to a particular Waterproofing or Water-shedding System, refer to the actual Standard located in [[Divisio EPDM roof systems are single-ply membranes available in thicknesses ranging from a nominal 1.

33 KB (4,674 words) - 16:01, 9 September 2021
Information Centre
:<big>[http://{{SERVERNAME}}/index.php?title=Insulation_Joints_and_Overlays Insulation Joints and Overlays]</big> ...and_Modified_Protected_Roof_Systems Protected and Modified Protected Roof Systems ]</big>

3 KB (468 words) - 21:32, 18 November 2022
ASM Roof Systems Standard
<big>Water-shedding Roof Systems: Metals</big> <big><big><big><big><big>Standard for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big>

260 KB (36,048 words) - 21:32, 5 April 2024
SBS Roof Systems Standard
<big>Waterproofing Roof Systems: Flexible Membranes (Polymer-modified Bituminous)</big> <big><big><big><big><big><big>Standard for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big></big>

465 KB (62,115 words) - 14:08, 16 May 2024
EPDM Roof Systems Standard
<big>Waterproofing Roof Systems: Thermoset Membranes</big> <big><big><big><big><big><big>Standard for EPDM Membrane Roof Systems</big></big></big></big></big></big>

423 KB (57,312 words) - 21:21, 5 April 2024
TPO Roof Systems Standard
<big>Waterproofing Roof Systems: Thermosplastic Membranes</big> <big><big><big><big><big><big>Standard for TPO Membrane Roof Systems</big></big></big></big></big></big>

420 KB (56,956 words) - 21:23, 5 April 2024
PVC Roof Systems Standard
<big>Waterproofing Roof Systems: Thermosplastic Membranes</big> <big><big><big><big><big><big>Standard for PVC Membrane Roof Systems</big></big></big></big></big></big>

415 KB (56,426 words) - 21:31, 5 April 2024
Asphalt Shingle Systems Standard
<big>Water-shedding Roof Systems: Bituminous</big> <big><big><big><big><big>Standard for Asphalt Shingle Roof Systems</big></big></big></big></big>

235 KB (33,160 words) - 21:33, 5 April 2024
Hot Rubber Roof Systems Standard
<big>Waterproofing Roof Systems: Liquid Membranes</big> ...<big><big><big><big>Standard for Hot Fluid-applied Rubberized Asphalt Roof Systems</big></big></big></big></big></big>

294 KB (41,687 words) - 21:32, 5 April 2024
(Draft) SBS Roof Systems Standard
<big>Waterproofing Roof Systems: Flexible Membranes (Polymer-modified Bituminous)</big> <big><big><big><big><big><big>Standard for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big></big>

466 KB (62,224 words) - 14:08, 16 May 2024
Materials:Terrafoam (Type 1, Flat)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:33, 24 June 2022
Materials:Terrafoam (Type 2, Flat)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:34, 24 June 2022
Materials:Terrafoam (Type 3, Flat)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:34, 24 June 2022
Materials:Terrafoam (Type 3, Tapered)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:35, 24 June 2022
Materials:Terrafoam (Type 2, Tapered)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:35, 24 June 2022
Materials:Terrafoam (Type 1, Tapered)
;Accepted for application in: Roof Waterproofing Systems Water-shedding Systems (ASM) ;Product Summary: Closed cell expanded polystyrene (EPS) rigid roofing insulation manufactured in flat panels, sloped panels, and tapered applications. Cons

2 KB (237 words) - 16:34, 24 June 2022
AccepMat123
<big>'''Classification (i.e., Architectural Metal Roofing, Insulation, Membranes, Asphalt Shingles)'''</big> ...oof Systems, Water-shedding Roof Systems, or Grade-level Waterproofing Systems; be specific if it is limited to, say, ASM)

2 KB (241 words) - 17:30, 10 February 2022
Notes to SBS Standard
...ig><big><big><big>Notes to Standard for SBS-modified Bitumen Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

61 KB (8,848 words) - 18:15, 2 April 2024
Notes to EPDM Standard
<big><big><big><big><big>Notes to Standard for EPDM Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

59 KB (8,541 words) - 18:06, 2 April 2024
Notes to TPO Standard
<big><big><big><big><big>Notes to Standard for TPO Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

57 KB (8,230 words) - 18:16, 2 April 2024
Notes to PVC Standard
<big><big><big><big><big>Notes to Standard for PVC Membrane Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

57 KB (8,230 words) - 18:16, 2 April 2024
Template:Part 1 - TPO
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,973 words) - 17:31, 22 November 2021
Template:Part 2 - TPO
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

25 KB (3,582 words) - 14:49, 23 December 2021
Template:Part 3 - TPO
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

55 KB (7,513 words) - 20:13, 22 April 2022
Template:Part 10 - TPO
...ority'' is responsible to specify {{hilite | the connections between the ''waterproofing'' or ''water-shedding system'' and ''walls'' or other building components, ...all finish must be installed at least 89 mm (3 ½”) above the ''finished waterproofing system''.

36 KB (5,069 words) - 18:00, 18 May 2022
Template:Part 11 - TPO
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the ''drainage plane'' may affect the determi

45 KB (6,830 words) - 19:36, 11 March 2022
Template:Part 12 - TPO
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again <li>a drainage layer beneath XPS insulation.

14 KB (2,184 words) - 18:25, 15 November 2021
Template:Part 13 - TPO
...thetic finish to the ''roof system''. ''Linear metal flashings'' are not a waterproofing component. Consequently, the roofing membrane should be continuous beneath ...metal flashings. RoofStar-accepted pre-engineered products are accepted as systems and therefore the requirements in this Part for metal gauge, profile, secur

28 KB (4,147 words) - 21:43, 27 April 2022
Template:Part 14 - TPO
:;''Extensive Vegetated Roof Systems'': sometimes referred to as "eco-roofs", 'low-profile green roofs," "roofto ...t is situated on top of, and covering all or a portion of, a constructed ''waterproofing system''. ''Overburden'' includes, without limitation,

32 KB (4,724 words) - 17:43, 16 November 2021
Template:Part 1 - PVC
...}} system''|| 2020-February-3 }}: {{hilite | means the top surface of a ''waterproofing system'' or ''water-shedding system'' that may include ballast or that supp ...slope, excludes water from a building and therefore waterproofs it. These systems are typically installed on slopes less than 1:4 (3” in 12”), on roofs o

35 KB (4,973 words) - 17:31, 22 November 2021
Template:Part 2 - PVC
...(adapted from ''ASTM D1079-18 Standard Terminology Relating to Roofing and Waterproofing'')|| 2021-June-30 }}. ...r function – ''waterproofing systems'' or ''water-shedding systems''. Within each classification, slope is defined as follows:

25 KB (3,582 words) - 14:50, 23 December 2021
Template:Part 3 - PVC
...ard test method for the dynamic wind uplift resistance of membrane-roofing systems'' (latest edition). ...any material, structure or item of equipment that is placed on top of a ''waterproofing system''. Gravel or pavers constitute ''overburden'' when they do not funct

55 KB (7,513 words) - 20:12, 22 April 2022
Template:Part 10 - PVC
...ority'' is responsible to specify {{hilite | the connections between the ''waterproofing'' or ''water-shedding system'' and ''walls'' or other building components, ...all finish must be installed at least 89 mm (3 ½”) above the ''finished waterproofing system''.

36 KB (5,070 words) - 14:53, 17 November 2021
Template:Part 11 - PVC
This section pertains to the waterproofing of roof penetrations, curbs, sleepers, drains and any other "details", in o ...021-October-30 }} {{hilite | (relative to the top of the ''finished waterproofing system'') – the location of the ''drainage plane'' may affect the determi

45 KB (6,830 words) - 19:37, 11 March 2022
Template:Part 12 - PVC
...mbrane Roof Systems'' or ''Modified Protected Membrane Systems''; in these systems, gravel ballast or pavers are used to secure the ''system'' materials again <li>a drainage layer beneath XPS insulation.

14 KB (2,184 words) - 18:37, 15 November 2021
Template:Part 13 - PVC
...thetic finish to the ''roof system''. ''Linear metal flashings'' are not a waterproofing component. Consequently, the roofing membrane should be continuous beneath ...metal flashings. RoofStar-accepted pre-engineered products are accepted as systems and therefore the requirements in this Part for metal gauge, profile, secur

28 KB (4,147 words) - 21:43, 27 April 2022
Template:Part 14 - PVC
:;''Extensive Vegetated Roof Systems'': sometimes referred to as "eco-roofs", 'low-profile green roofs," "roofto ...t is situated on top of, and covering all or a portion of, a constructed ''waterproofing system''. ''Overburden'' includes, without limitation,

32 KB (4,724 words) - 17:43, 16 November 2021
(Draft) Notes to Hot Rubber Standard
...><big><big>Notes to Standard for Hot Fluid-applied Rubberized Asphalt Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

41 KB (6,077 words) - 18:11, 2 April 2024
Notes to Hot Rubber Standard
...><big><big>Notes to Standard for Hot Fluid-applied Rubberized Asphalt Roof Systems</big></big></big></big></big> :<big>'''A-1.1.3.1.'''</big> ('''Permitted Roof Systems''')

41 KB (6,080 words) - 18:16, 2 April 2024
(Draft) ASM Roof Systems Standard
<big>Water-shedding Roof Systems: Metals</big> <big><big><big><big><big>Standard for Architectural Sheet Metal (ASM) Roof Systems</big></big></big></big></big>

261 KB (36,152 words) - 22:24, 5 April 2024
(Draft) Asphalt Shingle Systems Standard
<big>Water-shedding Roof Systems: Bituminous</big> <big><big><big><big><big>Standard for Asphalt Shingle Roof Systems</big></big></big></big></big>

236 KB (33,264 words) - 22:24, 5 April 2024
Materials:MULTIFIX
;Accepted for application in: Roof Waterproofing Systems ...sulation assembly. Torch-applied membranes may be applied directly to the insulation, when permitted by RGC Standards.

2 KB (257 words) - 18:59, 1 February 2023
Manufacturers:Soprema Inc.
<big><big>'''Waterproofing Roofs'''</big></big> ====Insulation====

12 KB (1,434 words) - 21:49, 28 March 2024