Search results
Search results
Create the page "$2" on this wiki! See also the search results found.
Page title matches
- #REDIRECT [[SBS 2-Part Retrofit Flashing (Cable Penetration)]]62 bytes (7 words) - 18:29, 27 June 2022
- 61 bytes (6 words) - 21:10, 27 June 2022
- 61 bytes (6 words) - 22:04, 27 June 2022
- <big><big><big><big><big>Roofs: 2-Component PMMA</big></big></big></big></big>1 KB (178 words) - 21:51, 7 September 2021
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:33, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:33, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:34, 23 October 2017
- 0 bytes (0 words) - 14:44, 26 October 2023
- #REDIRECT [[SBS 10 - 3.2 Parapet (independent of roof structure)(typical)]]75 bytes (9 words) - 17:11, 5 December 2019
- 61 bytes (6 words) - 16:14, 27 June 2022
- 310 bytes (33 words) - 21:53, 2 November 2016
- 48 bytes (7 words) - 18:33, 27 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:23, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:24, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:25, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:27, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:28, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for EPDM Roof Assemblies#EPDMVAPOUR|'''Vapo3 KB (332 words) - 16:49, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:29, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 16:50, 23 October 2017
- 44 bytes (5 words) - 17:54, 27 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOVAPOUR|'''Va3 KB (373 words) - 17:02, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:43, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:42, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:41, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:40, 23 October 2017
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> [[File:SBS 11.3.3.3-2 2-Part Cable 1.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/8/4 KB (630 words) - 18:16, 27 October 2023
- 54 bytes (7 words) - 17:48, 27 June 2022
- 35 bytes (4 words) - 18:40, 27 June 2022
- #REDIRECT [[SBS Details:D1.7.3-2 Edges & Fascia (Metal Edge Flashing)]]71 bytes (10 words) - 20:09, 21 November 2019
- ;1.2 <u>REFERENCES:</u> ::.2 RGC Guarantee Standards [E Waterproofing].23 KB (2,972 words) - 19:49, 9 November 2016
- #REDIRECT [[SBS 11.3.5-2 Roof Anchors (conventional system)]]61 bytes (7 words) - 19:36, 5 December 2019
- #REDIRECT [[SBS 1.1.2 Protected Membrane Roof Assembly (generic)]]66 bytes (7 words) - 15:12, 16 August 2019
- #REDIRECT [[EPDM 1.1.2 Protected Membrane Roof Assembly (generic)]]67 bytes (7 words) - 19:20, 13 November 2019
- #REDIRECT [[SBS 2.5.1 Control Joint (Roof Divider)]]52 bytes (6 words) - 22:32, 4 December 2019
- 36 bytes (4 words) - 17:36, 5 December 2019
- #REDIRECT [[SBS 10.3.5.2-1 Metal Edge Termination]]51 bytes (6 words) - 17:33, 5 December 2019
- #REDIRECT [[SBS 10.3.6.2 Control Joint (Roof Divider)]]55 bytes (6 words) - 17:40, 5 December 2019
- #REDIRECT [[SBS 11.3.2.4-1 Flange-style Drains (typical)]]58 bytes (6 words) - 19:29, 5 December 2019
- #REDIRECT [[SBS 11.3.3.2-4 Curbs and Sleepers (multiple penetrations)]]71 bytes (8 words) - 19:33, 5 December 2019
- #REDIRECT [[SBS 11.3.3.3-2 Penetration Flashings (two-part cable)]]67 bytes (7 words) - 19:35, 5 December 2019
- ...._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...M-B.png|class=img-responsive | link=https://rpm.rcabc.org/images/c/c6/10.3.2.3.-EPDM-B.png]]4 KB (577 words) - 15:01, 16 February 2024
- 62 bytes (6 words) - 21:00, 27 June 2022
- #REDIRECT [[PVC 1.3.1-2 Conventionally Insulated System (adhered)]]67 bytes (7 words) - 19:30, 18 February 2020
- 68 bytes (8 words) - 19:42, 18 February 2020
- ! colspan="1" rowspan="2" style=style="width:250px; vertical-align:center;text-align:center;" | Ma ! colspan="2" rowspan="1" style="vertical-align:top;background-color:#c8ccd1" | Dynamic18 KB (2,682 words) - 16:29, 15 November 2021
- 5 KB (642 words) - 20:05, 7 October 2021
- #REDIRECT [[SBS 1.1.3.-2 Conventionally Insulated System (alternate)]]70 bytes (7 words) - 16:30, 10 June 2022
- 40 bytes (5 words) - 17:24, 27 June 2022
- 57 bytes (7 words) - 16:39, 27 June 2022
- 38 bytes (5 words) - 17:12, 27 June 2022
- 52 bytes (7 words) - 19:07, 22 November 2022
- ====3.1.2. Framework of RoofStar Guarantee==== =====<big>3.1.2.1. Overview</big>=====15 KB (2,126 words) - 19:28, 1 February 2024
Page text matches
- #REDIRECT [[SBS 2-Part Retrofit Flashing (Cable Penetration)]]62 bytes (7 words) - 18:29, 27 June 2022
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re5 KB (808 words) - 16:06, 9 September 2021
- checkType('getArgs', 2, options, 'table', true) 29 KB (1,372 words) - 22:27, 2 July 2015
- ...s are generally manufactured using three materials: (1) modified bitumen, (2) reinforcement fibers, commonly woven as a sheet and embedded within the me5 KB (703 words) - 16:54, 23 November 2015
- ...s are generally manufactured using three materials: (1) modified bitumen, (2) reinforcement fibers, commonly woven as a sheet and embedded within the me ...sheet with a minimum tensile strength of 785 N/50 mm (CGSB 37-GP-56M Grade 2).22 KB (3,281 words) - 21:46, 17 July 2017
- :Poured 25 mm (1") for NVS and 50 mm (2") for Insulcel thickness over EPS insulation, these LWIC systems have been3 KB (474 words) - 21:16, 12 February 2019
- ::[[BUR Roof Systems Standard#BURDECKS | 2 ROOF DECKS]]2 KB (209 words) - 21:11, 30 August 2021
- ...ization_of_RPM_and_Standards <i class="fa fa-angle-double-right"></i> Part 2 - Structure and Organization] <div class="col-md-2">11 KB (1,581 words) - 19:51, 15 November 2021
- | colspan="2" | An Accessory is a material that joins Primary or Secondary Materials to2 KB (288 words) - 22:14, 8 September 2021
- #REDIRECT [[SBS 11.3.2.5-2 Scuppers and Overflows (through-wall scupper)]]74 bytes (8 words) - 15:59, 27 August 2021
- ;(2) '''Adhesion''': Membranes must be fully adhered, where exposed, and mechan3 KB (356 words) - 14:32, 30 June 2022
- <big><big><big><big><big>Roofs: 2-Component PMMA</big></big></big></big></big>1 KB (178 words) - 21:51, 7 September 2021
- | colspan="2" | <big>To view materials in any section listed below, click on the <span974 bytes (140 words) - 15:31, 24 October 2017
- ==={{hilite | 2. Material Acceptance Criteria || 2022-June-17 }}=== ...ace installation in British Columbia, over a period of no less than a two (2) years, ending at the time of application (Note: this can be supplemented b22 KB (3,050 words) - 16:20, 12 December 2023
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ====1.1.1.2. Tanks ====14 KB (2,333 words) - 16:39, 9 February 2022
- | colspan="2" | <big>To view materials in any section listed below, click on the <span6 KB (742 words) - 20:36, 27 July 2021
- <div class="col-md-2"> ...([[SBS_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====7 KB (906 words) - 16:03, 26 February 2024
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:34, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:34, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:35, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:32, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:33, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:33, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:33, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:34, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:34, 23 October 2017
- ....3.2.4. General Requirements for Asphalt Shingle Application | Article 9.3.2.4.]])</big></big></big></big></big> [[File:7.1.2.1.1.jpg| link= http://rpm.rcabc.org/images/6/6f/7.1.2.1.1.jpg | class=img-responsive]]3 KB (343 words) - 14:29, 30 June 2022
- Applicable to slopes 1:6 (2" in 12") and greater. ...ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 150 mm (6") minimum on ends. (See Section 3.1.5 for2 KB (260 words) - 22:52, 21 December 2015
- ...d#10.3.7.2. Intersections with Waterproofing Roof Systems | Article 10.3.7.2.]])</big></big></big></big></big> | [[File:ASh Intersection with Waterproofing Roof (Upper) 2.jpg | link=https://rpm.rcabc.org/images/8/81/ASh_Intersection_with_Waterpro3 KB (344 words) - 14:13, 5 October 2022
- ...d#10.3.7.2. Intersections with Waterproofing Roof Systems | Article 10.3.7.2.]])</big></big></big></big></big> | [[File:ASh Intersection with Waterproofing Roof (Lower) 2.jpg| link=https://rpm.rcabc.org/images/4/46/ASh_Intersection_with_Waterproo3 KB (351 words) - 14:11, 5 October 2022
- (2) <b>Fold Layout</b>: Formed from a minimum 26 guage galvanized steel divert1 KB (196 words) - 22:57, 21 December 2015
- ...ypical) ([[Asphalt_Shingle_Systems_Standard#12.3.2.4. Curbs | Article 12.3.2.4.]])</big></big></big></big></big> ;(2) [[Asphalt Shingle Systems Standard#AShPART11-APRON|'''Apron Flashing''']]2 KB (312 words) - 14:39, 30 June 2022
- ...[ASM_Roof_Systems_Standard#10.3.4.2. Eaves and Rake Edges | Article 10.3.4.2.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#10.3.4.2. Eaves and Rake Edges | '''Hook securement strip''']]: In this particular r3 KB (473 words) - 18:24, 28 June 2022
- ...are unitized (for example, pavers on pedestals) and do not exceed 1 M<sup>2</sup> or 90 Kg (200 lb.) per unit.9 KB (1,253 words) - 17:05, 10 December 2021
- ..._and_Standards#2.3.1.2._Authority_and_Conflict | Division A, Article 2.3.1.2.]] shall be applied. | [[#PART_2 | Part 2 - Supporting Structures: Decks and Walls]]416 KB (56,532 words) - 22:23, 5 April 2024
- ..._and_Standards#2.3.1.2._Authority_and_Conflict | Division A, Article 2.3.1.2.]] shall be applied. | [[#PART_2 | Part 2 - Supporting Structures: Decks and Walls]]424 KB (57,418 words) - 22:20, 5 April 2024
- ..._and_Standards#2.3.1.2._Authority_and_Conflict | Division A, Article 2.3.1.2.]] shall be applied. | [[#PART_2 | Part 2 - Supporting Structures: Decks and Walls]]421 KB (57,062 words) - 22:20, 5 April 2024
- ..._and_Standards#2.3.1.2._Authority_and_Conflict | Division A, Article 2.3.1.2.]] shall be applied. | [[#PART_2 | Part 2 - Supporting Structures: Decks and Walls]]296 KB (41,811 words) - 22:23, 5 April 2024
- | colspan="2" | <big>To view materials in any section listed below, click on the <span2 KB (235 words) - 20:34, 26 July 2021
- #REDIRECT [[SBS Details:D1.7.2-2 Parapets & Copings (Low Parapet - Unsupported by Wall)]]89 bytes (13 words) - 17:51, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.3-2 Edges & Fascia (Gravel Stop)]]63 bytes (9 words) - 17:56, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.5-2 Roof-Wall Transitions (Divider/Joint)]]72 bytes (9 words) - 18:08, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)]]80 bytes (10 words) - 18:12, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.7-2 Strip-in Flashings (Two-part Cable)]]70 bytes (9 words) - 18:15, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.8-2 Water & Drainage (Spun Copper Drain)]]71 bytes (10 words) - 18:18, 16 September 2016
- #REDIRECT [[SBS Details:D1.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)]]100 bytes (13 words) - 18:22, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.1-2 Assemblies (Ballasted Protected Membrane)]]77 bytes (9 words) - 21:21, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.2-2 Parapets & Copings (Parapet - Wall Transition)]]82 bytes (11 words) - 21:22, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.3-2 Edges & Fascia (Gravel Stop)]]64 bytes (9 words) - 21:23, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.4-2 Counter-flashings & Reglets (Deck - Unsupported by Wall)]]92 bytes (12 words) - 21:24, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.5-2 Roof-Wall Transitions (Divider/Joint)]]73 bytes (9 words) - 21:28, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)]]81 bytes (10 words) - 21:29, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.7-2 Strip-in Flashings (Two-part Cable)]]71 bytes (9 words) - 21:30, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.8-2 Water & Drainage (Spun Copper Drain)]]72 bytes (10 words) - 21:31, 16 September 2016
- #REDIRECT [[EPDM Details:D2.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)]]101 bytes (13 words) - 21:33, 16 September 2016
- #REDIRECT [[TPO Details:D3.7.1-2 Assemblies (Ballasted Protected Membrane)]]76 bytes (9 words) - 15:12, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.2-2 Parapets & Copings (Parapet - Wall Transition)]]81 bytes (11 words) - 15:13, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.3-2 Edges & Fascia (Gravel Stop)]]63 bytes (9 words) - 15:14, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.4-2 Counter-flashings & Reglets (Deck - Unsupported by Wall)]]91 bytes (12 words) - 15:15, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.5-2 Roof-Wall Transitions (Divider/Joint)]]72 bytes (9 words) - 15:17, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)]]80 bytes (10 words) - 15:19, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.7-2 Strip-in Flashings (Two-part Cable)]]70 bytes (9 words) - 15:27, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.8-2 Water & Drainage (Spun Copper Drain)]]71 bytes (10 words) - 15:27, 19 September 2016
- #REDIRECT [[TPO Details:D3.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)]]100 bytes (13 words) - 15:29, 19 September 2016
- ::<big>[[Catalyzed 2-Component Polymethyl Methacrylate (PMMA) | Catalyzed 2-Component PMMA]]</big> ::<big>[[Catalyzed 2-Component Polymethyl Methacrylate (PMMA) | Catalyzed 2-Component PMMA]]</big>13 KB (1,636 words) - 17:02, 5 January 2024
- Minimum roof slope is 1:6 (2" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" ...index.php?title=ASM_Roof_Systems_Standard#Section_9.2._Materials Section 9.2.] of the Standard.5 KB (684 words) - 14:23, 27 October 2023
- * {{hilite | A Performance Review conducted at the 2-year anniversary of the Project completion date, presented in writing joint ...terproofing Projects only, both upon completion of construction and at the 2-year anniversary of the Project completion date. || 2020-February-14 }}2 KB (284 words) - 18:25, 19 August 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re3 KB (386 words) - 15:33, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re2 KB (308 words) - 15:59, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ...r low-slope roofing (i.e., membrane roofing) shall be a minimum 12.7 mm (1/2")and as indicated in the applicable the BC Building Code (latest edition).20 KB (2,969 words) - 16:06, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re1 KB (198 words) - 15:33, 9 September 2021
- ...h ''Overburden'', equipment or living (amenity) spaces</span> (see '''14.1.2.1'''). ...abilities for all waterproofed surfaces, and should extend at least 50 mm (2") vertically from the water plane at</span>11 KB (1,608 words) - 22:03, 3 May 2021
- <big><big><big><big><big>Part 2 - Structure and Organization of RPM and Standards</big></big></big></big></ ==Section 2.1. How to Read Standards==15 KB (2,132 words) - 19:02, 18 August 2023
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re <td rowspan=2>C =</td>23 KB (3,279 words) - 15:42, 9 September 2021
- ::<big><big>[[Waterproofing Systems: 2-Ply SBS Membrane Systems | 2-Ply SBS Waterproofing Membrane Systems]]</big></big>1 KB (125 words) - 18:02, 22 June 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big>2 KB (225 words) - 21:24, 7 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re4 KB (532 words) - 15:44, 9 September 2021
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> ;(2) '''Flashing Flange''': minimum 100 mm (4") flange set in coating of compat3 KB (360 words) - 18:16, 27 October 2023
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> [[File:10.3.7.2.jpg| link=http://rpm.rcabc.org/images/9/9a/10.3.7.2.jpg | class=img-responsive]]2 KB (262 words) - 18:33, 27 June 2022
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> ;(2) [[SBS Roof Systems Standard#PART_13|'''Counter-flashing''']]2 KB (284 words) - 18:34, 27 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:43, 23 October 2017
- ;(2) [[TPO Roof Systems Standard#PART_9|'''Single-ply Membrane''']]: Installed3 KB (429 words) - 21:34, 27 June 2022
- ;(2) [[EPDM Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically attac3 KB (367 words) - 21:52, 27 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:23, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:23, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:23, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:24, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:24, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:25, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:25, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:25, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:26, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:26, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:26, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:27, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:27, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:27, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:27, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:28, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:28, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for EPDM Roof Assemblies#EPDMVAPOUR|'''Vapo3 KB (351 words) - 16:48, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for EPDM Roof Assemblies#EPDMVAPOUR|'''Vapo3 KB (347 words) - 16:48, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491,011 bytes (124 words) - 21:30, 16 September 2016
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:28, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for EPDM Roof Assemblies#EPDMVAPOUR|'''Vapo3 KB (332 words) - 16:49, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:29, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:29, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:29, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for EPDM Roof Assemblies#EPDMVAPOUR|'''Vapo3 KB (334 words) - 18:30, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:30, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:30, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:30, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 16:50, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (126 words) - 18:31, 23 October 2017
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ...he issue. If a roof requires 1.7 kPa (35 psf) uplift resistance, a 1.2 m x 2.4 m (4’ x 8’ or 32 ft²) sheet of insulation would require7 KB (999 words) - 15:42, 9 September 2021
- :Part 2: The Building Code and wind ...des “control or directives on legal authority”[[#Footnotes|<sup><small>2</small></sup>]]. The Building Regulation is managed by the British Columb21 KB (3,118 words) - 16:32, 16 March 2023
- ;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically fasten ...ll Surface - Plywood''']]: Conform to the requirements for Walls in '''2.6.2 Materials'''.3 KB (440 words) - 18:14, 27 October 2023
- ;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: See available insul3 KB (420 words) - 18:15, 27 October 2023
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re * Type 2 (Flat) asphalt is moderately susceptible to flow at roof temperatures. It i15 KB (2,293 words) - 15:33, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ...sheet with a minimum tensile strength of 785 N/50 mm (CGSB 37-GP-56M Grade 2).23 KB (3,307 words) - 15:57, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ...ed only for slopes exceeding 1:24 (1/2" in 12") but not exceeding 1:5 (2-1/2" in 12"). This will prevent the weight of the asphalt and gravel from causi8 KB (1,280 words) - 16:25, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re ...all piece of fabric is to be used, its dimension shall be at least 2.5 m x 2.5 m (8’ x 8’). Slit fabric to fit over roof penetrations, cut o11 KB (1,624 words) - 16:21, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re2 KB (256 words) - 16:19, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re <th colspan=2>Natural Air Flow Ventilators</th>6 KB (911 words) - 15:33, 9 September 2021
- | colspan="2" | '''NOTICE TO READER''': This is an <u>information page only</u>. To re3 KB (400 words) - 15:35, 9 September 2021
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 [[File:D3.7.8(2).jpg|class=img-responsive]]4 KB (462 words) - 17:01, 23 October 2017
- [[File:6.3.2.1.jpg|class=img-responsive]] ;(2) [[EPDM Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically attac2 KB (281 words) - 21:53, 27 June 2022
- ;(2) [[EPDM Roof Systems Standard#PART_9 |'''Single-ply Membrane''']]: Installe3 KB (422 words) - 21:33, 27 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOVAPOUR|'''Va3 KB (382 words) - 17:02, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOVAPOUR|'''Va3 KB (360 words) - 17:01, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOVAPOUR|'''Va3 KB (374 words) - 17:02, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOVAPOUR|'''Va3 KB (373 words) - 17:02, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:43, 23 October 2017
- | colspan="2" | <big>To view materials in any section listed below, click on the <span1 KB (161 words) - 20:33, 26 July 2021
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:42, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:42, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:42, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:43, 23 October 2017
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.2.3.2.1.jpg| link=http://rpm.rcabc.org/images/b/bc/7.2.3.2.1.jpg | class=img-responsive]]2 KB (266 words) - 21:05, 7 September 2021
- <big><big><big><big><big>CS Details:E3.7.2 (Flashings)</big></big></big></big></big> | colspan="2" | <big>'''''Notice to Reader'''''</big>2 KB (264 words) - 21:05, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.2.4.2.jpg| link=http://rpm.rcabc.org/images/6/6c/7.2.4.2.jpg | class=img-responsive]]3 KB (493 words) - 21:06, 7 September 2021
- <big><big><big><big><big>WP Details:F1.7.2 (Wearing Course - Unit Masonry)</big></big></big></big></big> | colspan="2" | <big>'''''Notice to Reader'''''</big>4 KB (458 words) - 21:14, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:9.6.1.jpg| link=http://rpm.rcabc.org/images/2/2b/9.6.1.jpg | class=img-responsive]]4 KB (454 words) - 21:14, 7 September 2021
- ;(2) '''Adhesion''': Membranes must be fully adhered, where exposed, and mechan ...tection membrane must overlap built-in gutter membrane by a minimum of 203.2 mm (8") and be installed in shingle fashion (not shown for clarity).3 KB (368 words) - 16:01, 18 March 2024
- ...[ASM_Roof_Systems_Standard#10.3.4.2. Eaves and Rake Edges | Article 10.3.4.2.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#10.3.4.2. Eaves and Rake Edges | '''Hook securement strip''']]: In this particular r3 KB (472 words) - 18:24, 28 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (128 words) - 15:20, 19 September 2016
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:41, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:41, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:42, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:40, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:40, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:40, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:41, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:39, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:39, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:39, 23 October 2017
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#6491 KB (131 words) - 18:40, 23 October 2017
- ...ystems_Standard#9.3.2.5. Application on Slopes Less Than 1:3 | Article 9.3.2.5.]])</big></big></big></big></big> <big>Applicable to slopes 1:6 (2" in 12") and greater.</big>3 KB (386 words) - 14:29, 30 June 2022
- ..._Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])</big></big></big></big></big> [[File:SBS 11.3.3.2.-3B.jpg| link=http://rpm.rcabc.org/images/6/6c/D1.7.6-4%281%29.jpg | class=4 KB (607 words) - 18:19, 27 October 2023
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> [[File:SBS 11.3.3.3-2 2-Part Cable 1.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/8/4 KB (630 words) - 18:16, 27 October 2023
- ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (420 words) - 18:14, 27 October 2023
- ..._Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])</big></big></big></big></big> ...pg|class=img-responsive | link=http://rpm.rcabc.org/images/f/f5/SBS_11.3.3.2-1_Basic_Curb.jpg]]3 KB (474 words) - 18:18, 27 October 2023
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) '''Insulation Overlay Protection''': Recommended.2 KB (291 words) - 16:27, 26 April 2019
- ...s_Standard#8.3.2.3. Underlayment for Common and Steep Slopes | Article 8.3.2.3.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#PART_13|'''Metal edge flashing''']]: Installed2 KB (328 words) - 14:53, 28 June 2022
- ...tems_Standard#8.3.2.4. Underlayment for Slopes Less Than 1:3 | Article 8.3.2.4.]])</big></big></big></big></big> [[File:ASM 8.1.2 Self-Adhered Underlayment.jpg|class=img-responsive | link=http://rpm.rcabc.2 KB (298 words) - 14:55, 28 June 2022
- ...[ASM_Roof_Systems_Standard#10.3.4.2. Eaves and Rake Edges | Article 10.3.4.2.]])</big></big></big></big></big> ;(1) [[ASM Roof Systems Standard#13.3.2.1. General Requirements for Linear Metal Flashing | '''Separation membrane'4 KB (483 words) - 18:24, 28 June 2022
- ...[ASM_Roof_Systems_Standard#10.3.4.2. Eaves and Rake Edges | Article 10.3.4.2.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#8.1.3.4. Separation Between Materials |'''Sepa2 KB (297 words) - 18:04, 28 June 2022
- ...#10.3.5.2. General Requirements for Valley Metal Flashing | Article 10.3.2.2.]] and [[ASM_Roof_Systems_Standard#10.3.5.3. Hooked Metal Valleys | Article ;(1) [[ASM Roof Systems Standard#8.1.3.2. Valley Protection |'''Valley Protection Membrane''']]: Accepted self-adher3 KB (407 words) - 18:24, 28 June 2022
- ...#10.3.5.2. General Requirements for Valley Metal Flashing | Article 10.3.2.2.]] and [[ASM_Roof_Systems_Standard#10.3.5.4. Unhooked Metal Valleys | Artic [[File:ASM 10.3.2 Unhooked Valley Flashing.jpg|class=img-responsive | link=http://rpm.rcabc.o3 KB (416 words) - 18:24, 28 June 2022
- .... General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...on.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/1/1a/ASM_10.2.1_Roof-Headwall_Connection.jpg]]4 KB (540 words) - 17:25, 28 June 2022
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#PART_7|'''Insulation''']]: Offset and stagger3 KB (432 words) - 19:00, 28 June 2022
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> ;(2) [[ASM Roof Systems Standard#8.1.3.3. Field Underlayment|'''Underlayment'''4 KB (537 words) - 17:35, 17 March 2023
- ...) ([[ASM_Roof_Systems_Standard#12.3.2.4._Curbs_and_Sleepers | Article 12.3.2.4.]])</big></big></big></big></big> ...el.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/4/40/ASM_11.2.1_Curb%2C_Split_Panel.jpg]]4 KB (530 words) - 20:11, 28 June 2022
- .... General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]] and [[ASM_Roof_Systems_Standard#10.3.4.1. Ridges | Article 10.3.4.1.]] ;(2) [[ASM Roof Systems Standard#8.1.3.5. Ventilation Beneath Panels|'''Ventila3 KB (370 words) - 17:54, 28 June 2022
- .... General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]] and [[ASM_Roof_Systems_Standard#10.3.4.1. Ridges | Article 10.3.4.1.]] ...ntee_Standards_for_Architectural_Sheet_Metal_(ASM)_Systems#Design_5 '''8.1.2 Design''']).3 KB (430 words) - 16:23, 28 June 2022
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649 ;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSLIP|'''Slip She2 KB (310 words) - 16:34, 26 April 2019
- .... General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...d).jpg|class=img-responsive | link=http://rpm.rcabc.org/images/5/5a/ASM_10.2.2_Roof-Headwall_Connection_%28Vented%29.jpg]]3 KB (464 words) - 17:31, 28 June 2022
- [[File:ASM 12.1.2 Built-in Gutter Assembly UPLOADED.jpg|class=img-responsive | link=http://rp ;(2) [[ASM Roof Systems Standard#8.1.3.3. Field Underlayment|'''Underlayment (l5 KB (611 words) - 18:17, 12 March 2024
- ...r architectural concealed fastener metal roofing systems (refer to Section 2.1.4 and 8.1.6.1). RGC Guarantee Standards for the application of copper met (2) <b>Ice Dam Protection and Underlay:</b> RGC accepted self-adhered modified3 KB (379 words) - 22:50, 21 December 2015
- [[File:8.1.6.2.jpg]] (2) <b>Ice Dam Protection / Insulation Overlay: </b>For slopes 2:12 to 4:12 use RGC accepted self-adhered modified bituminous membrane.3 KB (421 words) - 22:51, 21 December 2015
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.1.jpg| link=http://rpm.rcabc.org/images/c/c1/7.4.1.2.1.jpg | class=img-responsive]]4 KB (607 words) - 21:09, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> (2) <b>Adhesion:</b> Membranes must be fully adhered, where exposed, and mecha3 KB (425 words) - 21:06, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) ADHESION: Membranes must be fully adhered, where exposed, and mechanically3 KB (401 words) - 21:12, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.3.2.2.12.jpg| link=http://rpm.rcabc.org/images/9/90/7.3.2.2.12.jpg | class=img-responsive]]2 KB (370 words) - 21:07, 7 September 2021
- <big><big><big><big><big>TS Details:E4.7.2 (Tile - Rake Edge)</big></big></big></big></big> | colspan="2" | <big>'''''Notice to Reader'''''</big>2 KB (311 words) - 21:07, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.3.2.2.16.jpg| link=http://rpm.rcabc.org/images/8/8d/7.3.2.2.16.jpg | class=img-responsive]]3 KB (375 words) - 21:08, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.3.2.2.17.jpg| link=http://rpm.rcabc.org/images/f/f7/7.3.2.2.17.jpg | class=img-responsive]]2 KB (359 words) - 21:08, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.3.2.2.15.jpg| link=http://rpm.rcabc.org/images/b/bd/7.3.2.2.15.jpg | class=img-responsive]]2 KB (298 words) - 21:08, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ...protection / underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.3 KB (387 words) - 21:09, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.4.jpg| link=http://rpm.rcabc.org/images/1/1e/7.4.1.2.4.jpg | class=img-responsive]]3 KB (377 words) - 21:10, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.6.jpg| link=http://rpm.rcabc.org/images/9/93/7.4.1.2.6.jpg | class=img-responsive]]2 KB (366 words) - 21:10, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.8.jpg| link=http://rpm.rcabc.org/images/1/13/7.4.1.2.8.jpg | class=img-responsive]]3 KB (379 words) - 21:11, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.10.jpg| link=http://rpm.rcabc.org/images/f/fb/7.4.1.2.10.jpg | class=img-responsive]]3 KB (439 words) - 21:11, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:7.4.1.2.11.jpg| link=http://rpm.rcabc.org/images/1/13/7.4.1.2.11.jpg | class=img-responsive]]2 KB (277 words) - 21:11, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:9.6.3.jpg| link=http://rpm.rcabc.org/images/2/27/9.6.3.jpg | class=img-responsive]]4 KB (484 words) - 21:15, 7 September 2021
- ;(2) [[TPO Roof Systems Standard#PART_7|'''Insulation''']]: Mechanically attach3 KB (383 words) - 21:38, 27 June 2022
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ...th fibreglass facer and silicone treated core, minimum thickness 12 mm (1/2"), conforming to ASTM E 6614 KB (527 words) - 21:15, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPSTRIPPING | '''Membrane flashing (s4 KB (527 words) - 21:16, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:D1.7.24 (View 2).jpg| link=http://rpm.rcabc.org/images/c/ca/D1.7.6-5_%282%29.jpg | class=im5 KB (580 words) - 21:16, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPSTRIPPING | '''Membrane Flashing'''4 KB (560 words) - 21:17, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPSTRIPPING | '''Membrane Flashing'''4 KB (596 words) - 21:17, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPSTRIPPING | '''Membrane Flashing (s4 KB (463 words) - 21:18, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPSTRIPPING | '''Membrane Flashing'''4 KB (475 words) - 21:21, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPMEMBRANE | '''Primary Waterproofing4 KB (467 words) - 21:21, 7 September 2021
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ;(2) [[Grade-level Waterproofing Standard#WPMEMBRANE | '''Primary Waterproofing3 KB (413 words) - 21:22, 7 September 2021
- ...([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big> [[File:SBS 10.3.5.3 Cant Edge (2).jpg|class=img-responsive | link=http://rpm.rcabc.org/images/9/91/SBS_10.3.3 KB (472 words) - 17:57, 27 October 2023
- ...le:SBS 1.3.1-1.jpg|class=img-responsive | link=http://rpm.rcabc.org/images/2/29/SBS_1.3.1-1.jpg]] ;(2) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: Installed in stagge3 KB (446 words) - 17:36, 27 October 2023
- ...._General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]]; [[SBS_Roof_Systems_Standard#10.3.4.1._Parapets | Article 10.3.4.1.]]) ...piece over the top and down the exterior face as required in Article 10.3.2.3.4 KB (633 words) - 21:01, 1 November 2022
- ...andard#PART_9|'''Base Membrane (field)''']]: See Tables '''9.1''' and '''9.2''' for acceptable membrane types and application methods. ;(2) [[SBS Roof Systems Standard#PART_10|'''Base Membrane (flashing)''']]: Carr5 KB (661 words) - 17:37, 27 October 2023
- ...BS_Roof_Systems_Standard#14.3.2.7._Structures_and_Equipment | Article 14.3.2.7.]])</big></big></big></big></big> [[File:D1.7.6-5 (2).jpg| link=http://rpm.rcabc.org/images/c/ca/D1.7.6-5_%282%29.jpg | class=im4 KB (513 words) - 18:21, 27 October 2023
- | colspan="2" | <big>'''''Notice to Reader'''''</big> ...ubstrates) and extend down the outside face of the parapet at least 50 mm (2”). Edges must be hemmed (1a), although a kicked-out drip edge is optiona4 KB (557 words) - 17:40, 13 December 2022
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:10.2.1.1.jpg| link=http://rpm.rcabc.org/images/9/9d/10.2.1.1.jpg | class=img-responsive]]3 KB (397 words) - 14:09, 10 August 2023
- | colspan="2" | <big>'''''Notice to Reader'''''</big> [[File:10.2.1.2.jpg| link=http://rpm.rcabc.org/images/4/4b/10.2.1.2.jpg | class=img-responsive]]3 KB (400 words) - 19:08, 22 November 2022
- * Straight claw hammer, spud bar or 35 mm (1-1/2") chisel to remove aggregate ...reas for note taking. These might by alphanumeric such as Roof Area A-1, A-2, etc., or by function such as “Boiler Room”. Note building heig75 KB (11,617 words) - 21:00, 3 September 2021
- :<table cellspacing="0" cellpadding="2" border=1> <td nowrap>1:2</td>7 KB (981 words) - 15:37, 9 June 2022
- ...nal Standards of Canada: The International System of Units (SI), CAN3-Z234.2-76, and the Canadian Metric Practice Guide, CAN3-Z234.1-79. Both of these d <table cellspacing="0" cellpadding="2">11 KB (1,750 words) - 20:54, 3 September 2021
- :(2) any granular mineral material. ...inute globules of bituminous material in water or in an aqueous solution;:(2) A suspension of minute globules of water or an aqueous solution in a liqui76 KB (11,565 words) - 18:09, 26 January 2024
- | colspan="2" | <big>To view materials in any section listed below, click on the <span5 KB (633 words) - 20:30, 26 July 2021
- == 11.2.1 <u>Physical Properties</u> == :2 Tensile strength11 KB (1,753 words) - 15:02, 4 May 2017
- | colspan="2" | <big>To view materials in any section listed below, click on the <span5 KB (614 words) - 20:30, 26 July 2021
- ...be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2). * Type 23 KB (465 words) - 20:53, 29 September 2016
- ...be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2). ...fabric or glass fibres, and in thicknesses usually ranging from 1.2 mm to 2.0 mm, depending on the manufacturer. Non-reinforced PVC membranes may typic4 KB (470 words) - 20:21, 27 July 2016
- ...._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...S-E.png|class=img-responsive | link=https://rpm.rcabc.org/images/a/ae/10.3.2.3.-SBS-E.png]]4 KB (584 words) - 15:27, 26 February 2024
- ...._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...O-C.png|class=img-responsive | link=https://rpm.rcabc.org/images/8/8f/10.3.2.3.-TPO-C.png]]4 KB (599 words) - 22:20, 23 February 2024
- ...be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2). ...fabric or glass fibres, and in thicknesses usually ranging from 1.2 mm to 2.0 mm, depending on the manufacturer. Non-reinforced PVC membranes may typic4 KB (463 words) - 16:20, 20 February 2019
- ...#11.3.3.2._General_Requirements_for_Cast-iron_Roof_Drains | Article 11.3.3.2.]])</big></big></big></big></big> ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (416 words) - 18:00, 27 October 2023
- [[File:10.3.6.2.jpg| link=http://rpm.rcabc.org/images/7/78/10.3.6.2.jpg | class=img-responsive]] ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (334 words) - 18:01, 27 October 2023
- #REDIRECT [[SBS Details:D1.7.1-2 Assemblies (Protected Membrane)]]66 bytes (8 words) - 17:50, 16 September 2016
- ...jpg|class=img-responsive | link=http://rpm.rcabc.org/images/6/62/10.3.1.2.jpg]] ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (374 words) - 17:46, 27 October 2023
- :[[File:Pdf.png|100 px|link=http://rpm.rcabc.org/images/1/13/D1.7.2-3_Print_Sheet.pdf|'''Print Sheet''']] ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I4 KB (474 words) - 17:59, 27 October 2023
- ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]:If ;(9) [[SBS Roof Systems Standard#PART_10|'''Wall Tie-in''']]: Minimum 2 mm (0.078") self-adhered modified bitumen or flexible membrane manufacture3 KB (402 words) - 17:50, 27 October 2023
- | colspan="2" | <big>'''''RoofStar Guarantee Standards''''' are <span style="color:#649952 bytes (118 words) - 14:48, 27 September 2017
- ...3.2.7._Railings.2C_Ladders.2C_and_Other_Attached_Structures | Article 12.3.2.7.]])</big></big></big></big></big> [[File:D1.7.36 (View 2).jpg| link=http://rpm.rcabc.org/images/3/39/D1.7.36_%28View_2%29.jpg | clas1 KB (195 words) - 18:45, 27 June 2022
- ...([[SBS_Roof_Systems_Standard#10.3.4.2._Low_Profile_Edges | Article 10.3.4.2.]])</big></big></big></big></big> ....2 Metal Edge.jpg|class=img-responsive | link=https://rpm.rcabc.org/images/2/2b/SBS_10.3.5.2_Metal_Edge.jpg]]3 KB (377 words) - 17:55, 27 October 2023
- ...._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big> ...M-B.png|class=img-responsive | link=https://rpm.rcabc.org/images/c/c6/10.3.2.3.-EPDM-B.png]]4 KB (580 words) - 16:27, 26 February 2024
- ;(2) [[SBS Roof Systems Standard#PART_10|'''Expansion joint (elastomeric produc2 KB (329 words) - 20:56, 1 November 2022
- [[File:SBS Low Door Opening.jpg|link=https://rpm.rcabc.org/images/2/26/SBS_Low_Door_Opening.jpg |class=img-responsive]] ;(2) [[SBS Roof Systems Standard#PART_9|'''Field Membrane''']]: SBS-modified bi3 KB (478 words) - 22:42, 9 December 2022
- ;(2) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing''']]: Carried up4 KB (508 words) - 18:51, 27 June 2022
- ;(2) [[SBS Roof Systems Standard#PART_10|'''Expansion joint (elastomeric produc3 KB (382 words) - 16:29, 12 December 2022
- ...._General Application Requirements for Perimeters and Walls | Article 10.3.2.3.]]; [[SBS_Roof_Systems_Standard#10.3.4.1._Parapets | Article 10.3.4.1.]]) ...ystems_Standard#10.1.6.2. Control Joints (Roof Dividers) | Article 10.1.6.2.]] concerning permissible design heights for control joints.4 KB (522 words) - 20:57, 1 November 2022
- ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (386 words) - 21:52, 16 September 2022
- ;(2) [[SBS Roof Systems Standard#PART_10|'''Base Membrane Flashing''']]3 KB (360 words) - 18:52, 21 September 2022
- ..._Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])</big></big></big></big></big> [[File:10.3.5.2.jpg| link=http://rpm.rcabc.org/images/3/30/10.3.5.2.jpg | class=img-responsive]]3 KB (377 words) - 18:21, 27 October 2023
- ..._Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])</big></big></big></big></big> ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (344 words) - 18:18, 27 October 2023
- ...cket ([[SBS_Roof_Systems_Standard#12.3.2.8._Sealant_Pockets | Article 12.3.2.8.]])</big></big></big></big></big> ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (381 words) - 18:47, 27 June 2022
- ...rd#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])</big></big></big></big></big> ;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: I3 KB (418 words) - 18:15, 27 October 2023
- | colspan="2" | <big>To view materials in any section listed below, click on the <span5 KB (576 words) - 20:33, 26 July 2021
- ===={{hilite | 3.1.1.2. Intent || 2021-October-30 }}==== (See [[Notes to SBS Standard#A-3.1.1.2. | Note A-3.1.1.2.]])55 KB (7,359 words) - 21:22, 3 October 2023
- [[File:Standing Seam Type (Mechanical 2) View 2.jpg]]204 bytes (27 words) - 16:30, 9 September 2016
- ...rpm.rcabc.org/index.php?title=SBS_Roof_Systems_Standard#PART_2 {{hilite | 2 SUPPORTING STRUCTURES: Decks and Walls || 2020-October-21 }}]3 KB (366 words) - 18:42, 30 August 2021