Search results

Create the page "Section:Help" on this wiki! See also the search results found.

Page title matches

Section:SBS Introduction

30 bytes (3 words) - 18:51, 25 November 2015
Section: Introduction
...tyrene butadiene styrene (SBS) or atactic polypropylene (APP; see separate section in this Manual). The manufacturer must ensure that a suitable degree of com ...membranes has been “blown” (clarify), similar to roofing asphalt (see Section 3.9.1). This produces a higher softening point and, therefore, a more usefu

5 KB (703 words) - 16:54, 23 November 2015
Section:SBS Guide Specification

37 bytes (4 words) - 18:52, 25 November 2015
Section: Roof Classes

26 bytes (3 words) - 18:17, 25 November 2015
Section:Building Ventilation

34 bytes (3 words) - 18:26, 25 November 2015
Section:Steep-slope Membranes

35 bytes (3 words) - 18:20, 25 November 2015
Section:IRMA

18 bytes (2 words) - 18:22, 25 November 2015
Section:Membrane Surfaces

31 bytes (3 words) - 18:21, 25 November 2015
Section:Low-slope Membranes

33 bytes (3 words) - 18:20, 25 November 2015
Section:BUR Materials

27 bytes (3 words) - 18:20, 25 November 2015
Section:Fasteners

23 bytes (2 words) - 18:19, 25 November 2015
Section:Insulation Joints and Overlay

43 bytes (5 words) - 18:19, 25 November 2015
Section:Insulating the Roof

33 bytes (4 words) - 18:18, 25 November 2015
Section:Vapour Retarders

30 bytes (3 words) - 18:18, 25 November 2015
Section:Underlay

22 bytes (2 words) - 18:18, 25 November 2015
Section:Roof Decks

24 bytes (3 words) - 18:17, 25 November 2015
Section:Roof Plans

24 bytes (3 words) - 18:17, 25 November 2015
Section:Design Considerations

35 bytes (3 words) - 16:53, 25 November 2015
Section:Independent Inspections

37 bytes (3 words) - 18:11, 25 November 2015
Section:The Guarantee Program

35 bytes (4 words) - 18:10, 25 November 2015
Section:B. Essential Elements
[[Section:C. Accepted Materials| ''C. Acce

2 KB (290 words) - 20:13, 22 August 2016
Section:A. The Roofstar Guarantee Program
#REDIRECT [[Section:A. About]]

30 bytes (4 words) - 19:40, 24 November 2015
Section:Accepted Materials - SBS Roofing

46 bytes (6 words) - 18:45, 25 November 2015
Section:C. Accepted Materials

732 bytes (97 words) - 16:54, 19 August 2016
Section:SBS Construction Details

38 bytes (4 words) - 18:50, 25 November 2015
Section:Low Slope Roof Details

36 bytes (5 words) - 18:49, 25 November 2015
Section:Application
#REDIRECT [[Section:SBS Application]]

37 bytes (4 words) - 16:37, 24 November 2015
Section:RoofStar Guarantee Standards for SBS Roof Systems

63 bytes (8 words) - 18:51, 25 November 2015
Section:Definition and Terms
#REDIRECT [[Section:SBS Definition and Terms]]

46 bytes (6 words) - 16:36, 24 November 2015
Section:Introduction
#REDIRECT [[Section:SBS Introduction]]

38 bytes (4 words) - 16:35, 24 November 2015
Section:A. About
[[Section:B. Essential Elements| ''B. Esse

643 bytes (78 words) - 18:53, 27 July 2016
Section:SBS Definition and Terms

38 bytes (5 words) - 18:51, 25 November 2015
Section:SBS Application

29 bytes (3 words) - 18:52, 25 November 2015
Section:Guide SBS Specification
#REDIRECT [[Section:Guide Specification]]

41 bytes (4 words) - 16:40, 24 November 2015
Section:Guide Specification
#REDIRECT [[Section:SBS Guide Specification]]

45 bytes (5 words) - 16:40, 24 November 2015
Section:Test
This is the Test Section

24 bytes (5 words) - 19:42, 7 December 2015
Section:H. General Information

33 bytes (3 words) - 22:00, 22 August 2016
Section:F. Application: Waterproofing Plazas, Promenades and Terraces
#REDIRECT [[Section:F. Waterproofing Plazas, Promenades and Terraces]]

70 bytes (8 words) - 19:16, 6 January 2016
Section:F. Waterproofing Plazas, Promenades and Terraces

59 bytes (6 words) - 21:59, 22 August 2016
Section:G. Construction Details

34 bytes (3 words) - 21:59, 22 August 2016
Section: A Roofstar Guarantee

0 bytes (0 words) - 18:19, 2 September 2021
Section: I General Information
:This Section link is not used. Click on the [[Main Page]] link to return to the Table o

100 bytes (19 words) - 18:23, 2 September 2021

Page text matches

FAQ
Enter a word, a phrase or a section number into the search window and all of the sections these words appear in ...ab, the page will display a list of the changes made on the page or in the section you are viewing.

3 KB (537 words) - 20:47, 21 October 2016
OH&S - WorkSafeBC Publications
:Pursuant to Section 70 of the Workers' Compensation Act.

3 KB (432 words) - 14:39, 9 June 2017
Section: Introduction
...tyrene butadiene styrene (SBS) or atactic polypropylene (APP; see separate section in this Manual). The manufacturer must ensure that a suitable degree of com ...membranes has been “blown” (clarify), similar to roofing asphalt (see Section 3.9.1). This produces a higher softening point and, therefore, a more usefu

5 KB (703 words) - 16:54, 23 November 2015
Products - 0
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:21, 12 October 2016
Building a Roof
[[Section:B. Essential Elements| Back

174 bytes (24 words) - 16:38, 27 November 2015
Section:B. Essential Elements
[[Section:C. Accepted Materials| ''C. Acce

2 KB (290 words) - 20:13, 22 August 2016
Section:A. The Roofstar Guarantee Program
#REDIRECT [[Section:A. About]]

30 bytes (4 words) - 19:40, 24 November 2015
Section:Application
#REDIRECT [[Section:SBS Application]]

37 bytes (4 words) - 16:37, 24 November 2015
SBS Introduction
...tyrene butadiene styrene (SBS) or atactic polypropylene (APP; see separate section in this Manual). The manufacturer must ensure that a suitable degree of com ...us membranes has been “blown”, similar to roofing asphalt (see Section 3.9.1). This produces a higher softening point and, therefore, a more usef

22 KB (3,281 words) - 21:46, 17 July 2017
BUR Roof System Details
:The drawings contained within this section are intended to represent a variety of thermoplastic roof system applicatio ...| Back to ''Construction Details Section'']]

2 KB (277 words) - 21:16, 30 August 2021
Section:Definition and Terms
#REDIRECT [[Section:SBS Definition and Terms]]

46 bytes (6 words) - 16:36, 24 November 2015
Section:Introduction
#REDIRECT [[Section:SBS Introduction]]

38 bytes (4 words) - 16:35, 24 November 2015
Accepted Materials - Hot-applied Rubberized Asphalt Roof Assemblies
Note: this section is incomplete and currently under construction. | colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND'''

974 bytes (140 words) - 15:31, 24 October 2017
Accepted Materials - PMMA Liquid Membrane Assemblies (field)
Note: this section is incomplete and currently under construction.

106 bytes (14 words) - 20:31, 26 July 2021
Material Classification and Application for Acceptance
...ppliers wishing to have their accessories listed in the Accepted Materials section of the '''''RoofStar Roofing Practices Manual''''' must provide the followi ...orms for application are available to download from the Accepted Materials section of the RPM:

22 KB (3,050 words) - 16:20, 12 December 2023
SBS Modified Bitumen Application Guides and Notes
==Section 1.1. SBS Application and Safety: Best Practices == This section contains precautions for applying modified bitumen roofing. The applicator

14 KB (2,333 words) - 16:39, 9 February 2022
Accepted Materials - SBS Modified Bitumen Membrane Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

6 KB (742 words) - 20:36, 27 July 2021
Asphalt Shingles - Application (Common and Steep Slopes)
...e Systems Standard#AShSECUREMENT|'''Nailing''']]: See the requirements in Section '''3.3 Application'''.

3 KB (343 words) - 14:29, 30 June 2022
AS Details:E2.7.1 (Low Slope Shingle Application)
...ial. Lap 50 mm (2") minimum on sides and 150 mm (6") minimum on ends. (See Section 3.1.5 for a list of accepted eave protection and underlayment.) [[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x

2 KB (260 words) - 22:52, 21 December 2015
AS Details:E2.7.11 (Counter-flashing - Diverter Flashing)
[[Section:E. Application: Steep Slope Roofs| Ba

1 KB (196 words) - 22:57, 21 December 2015
Asphalt Shingles - Curb Flashing (Typical)
;(6) '''Capillary Section''': A capillary tab is to be extended off the end of the back pan to lead w

2 KB (312 words) - 14:39, 30 June 2022
(Draft) PVC Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

416 KB (56,532 words) - 22:23, 5 April 2024
(Draft) EPDM Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

424 KB (57,418 words) - 22:20, 5 April 2024
(Draft) TPO Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

421 KB (57,062 words) - 22:20, 5 April 2024
(Draft) Hot Rubber Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

296 KB (41,811 words) - 22:23, 5 April 2024
Accepted Materials - Cedar Shake & Shingle Roof Assemblies
| colspan="2" | <big>To view materials in any section listed below, click on the '''Expand'''

2 KB (235 words) - 20:34, 26 July 2021
Section:A. About
[[Section:B. Essential Elements| ''B. Esse

643 bytes (78 words) - 18:53, 27 July 2016
Section:Guide SBS Specification
#REDIRECT [[Section:Guide Specification]]

41 bytes (4 words) - 16:40, 24 November 2015
Section:Guide Specification
#REDIRECT [[Section:SBS Guide Specification]]

45 bytes (5 words) - 16:40, 24 November 2015
ASM Panel Page Template (for Active Members)
...rcabc.org/index.php?title=ASM_Roof_Systems_Standard#Section_9.2._Materials Section 9.2.] of the Standard.

5 KB (684 words) - 14:23, 27 October 2023
Design Considerations
This section deals with roof system design considerations.

3 KB (386 words) - 15:33, 9 September 2021
Roof Decks
...heets, slip sheets, and mechanically fastened base sheets are installed to help relieve stresses in the membrane due to movement of the deck. ...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") on centr

20 KB (2,969 words) - 16:06, 9 September 2021
Requirements
{{Template:Section 1.6 (All Standards)}}

11 KB (1,608 words) - 22:03, 3 May 2021
Structure and Organization of RPM and Standards
==Section 2.1. How to Read Standards== <li>'''Section 1 (General)''' includes definitions and broadly applicable design guideline

15 KB (2,132 words) - 19:02, 18 August 2023
Insulating the Roof
The remainder of this section will provide information about types of the roof insulation available in Br ...properties decrease from Type 1 to Type 4. (For Type 2 and Type 4 see also section 6 above, Extruded Expanded Polystyrene). Note: Type 4 is usua

23 KB (3,279 words) - 15:42, 9 September 2021
Insulation Joints and Overlays
...'''[[Insulation Joint Tape|Accepted Materials: Insulation Joint Tape]]''' section of this Manual.

4 KB (532 words) - 15:44, 9 September 2021
EPDM Details:D2.7.6-3 Curbs & Sleepers (Basic Curb)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (351 words) - 16:48, 23 October 2017
EPDM Details:D2.7.6-4 Curbs & Sleepers (Mechanical Opening)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (347 words) - 16:48, 23 October 2017
EPDM Details:D2.7.6-5 Curbs & Sleepers (Pre-curb for Planters)
[[Section:D. Application: Low Slope Roofs|</ [[Section:G. Construction Details| Back

1,011 bytes (124 words) - 21:30, 16 September 2016
EPDM Details:D2.7.7-2 Strip-in Flashings (Two-part Cable)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual. ...set membrane may be joined using uncured tape or proprietary adhesive (See Section 6.1).

3 KB (332 words) - 16:49, 23 October 2017
EPDM Details:D2.7.8-3 Water & Drainage (Clamping Spun Copper Drain)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual. ...found in the BC Building Code at Appendix P.7.4.10 and Section 7.4.10.11 (Section 7.4.10.10 for gutters) in conjunction with the 15 minute rainfall value fro

3 KB (334 words) - 18:30, 23 October 2017
Materials by Application
[[Section:C. Accepted Materials| Back

1 KB (134 words) - 15:45, 8 January 2016
Waterproofing Materials
...neric” application specifications and details are not possible. This section of the manual contains both an overview of the products, their composition,

23 KB (3,307 words) - 15:57, 9 September 2021
Building Ventilation
This section of the RCABC '''''Roofing Practices Manual''''' provides general informatio Requirements for Residential and Small Buildings (BC Building Code Section 9.19)

6 KB (911 words) - 15:33, 9 September 2021
Products - B
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:15, 12 October 2016
Products - C
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:15, 12 October 2016
Products - D
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:17, 12 October 2016
Products - E
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:17, 12 October 2016
Products - G
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:18, 12 October 2016
Products - H
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:18, 12 October 2016
Products - I
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:19, 12 October 2016
Products - J
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:19, 12 October 2016
Products - K
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:20, 12 October 2016
Products - L
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:20, 12 October 2016
Products - M
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:20, 12 October 2016
Products - N
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:21, 12 October 2016
Products - O
[[Section:C. Accepted Materials| Back

252 bytes (35 words) - 20:14, 1 December 2015
Products - P
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:21, 12 October 2016
Products - Q
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:21, 12 October 2016
Products - R
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:22, 12 October 2016
Products - S
[[Section:C. Accepted Materials| Back to

408 bytes (54 words) - 22:12, 20 August 2019
Products - T
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:22, 12 October 2016
Products - U
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:23, 12 October 2016
Products - V
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:23, 12 October 2016
Products - W
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:23, 12 October 2016
Products - X
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:24, 12 October 2016
Products - Y
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:24, 12 October 2016
Products - Z
[[Section:C. Accepted Materials| Back to

290 bytes (38 words) - 19:24, 12 October 2016
Section:Test
This is the Test Section

24 bytes (5 words) - 19:42, 7 December 2015
TPO Details:D3.7.3-3 Edges & Fascia (Roof Edge)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

4 KB (462 words) - 17:01, 23 October 2017
TPO Details:D3.7.6-4 Curbs & Sleepers (Mechanical Opening)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (382 words) - 17:02, 23 October 2017
TPO Details:D3.7.6-3 Curbs & Sleepers (Basic Curb)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (360 words) - 17:01, 23 October 2017
TPO Details:D3.7.8-3 Water & Drainage (Clamping Spun Copper Drain)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual. ...found in the BC Building Code at Appendix P.7.4.10 and Section 7.4.10.11 (Section 7.4.10.10 for gutters) in conjunction with the 15 minute rainfall value fro

3 KB (374 words) - 17:02, 23 October 2017
TPO Details:D3.7.7-2 Strip-in Flashings (Two-part Cable)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (373 words) - 17:02, 23 October 2017
Accepted Materials - Asphalt Shingle Roof Assemblies
| colspan="2" | <big>To view materials in any section listed below, click on the '''Expand'''

1 KB (161 words) - 20:33, 26 July 2021
All Applications:MATERIALS
...able to RGC. A listing is published in the RCABC Roofing Practices Manual, Section ('''''Reference needed'''''). ...in the RCABC Roofing Practices Manual, Section C. See also below in this Section, D1.4.

1 KB (188 words) - 23:21, 21 December 2015
TPO Details:D3.7.6-5 Curbs & Sleepers (Pre-curb for Planters)
[[Section:D. Application: Low Slope Roofs|</ [[Section:G. Construction Details| Back

1 KB (128 words) - 15:20, 19 September 2016
All Standards: MATERIALS
...able to RGC. A listing is published in the RCABC Roofing Practices Manual, Section ('''''Reference needed'''''). ...in the RCABC Roofing Practices Manual, Section C. See also below in this Section, D1.4.

1 KB (188 words) - 23:09, 21 December 2015
Asphalt Shingles - Application (Low Slopes)
...e Systems Standard#AShSECUREMENT|'''Nailing''']]: See the requirements in Section '''3.3 Application'''.

3 KB (386 words) - 14:29, 30 June 2022
All Applications: MATERIALS
...able to RGC. A listing is published in the RCABC Roofing Practices Manual, Section ('''''Reference needed'''''). ...in the RCABC Roofing Practices Manual, Section C. See also below in this Section, D1.4.

1 KB (188 words) - 23:11, 21 December 2015
SBS Flanged Insert Drain (Clamping Ring)
...found in the BC Building Code at Appendix P.7.4.10 and Section 7.4.10.11 (Section 7.4.10.10 for gutters) in conjunction with the 15 minute rainfall value fro

3 KB (420 words) - 18:14, 27 October 2023
SBS Basic Curb
...See Table 9.1. for acceptable membrane types and securement options. See Section 9.3. for application requirements. ...9.1. for acceptable cap membrane types and their securement options. See Section 9.3. for application requirements.

3 KB (474 words) - 18:18, 27 October 2023
ASM Details:E1.7.17 (Copper Standing Seam Systems Eave & Gable Flashing)
...dards for architectural concealed fastener metal roofing systems (refer to Section 2.1.4 and 8.1.6.1). RGC Guarantee Standards for the application of copper m [[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x

3 KB (379 words) - 22:50, 21 December 2015
ASM Details:E1.7.18 (Zinc Standing Seam Systems Eave & Gable Flashing)
[[Section:E. Application: Steep Slope Roofs| Ba

3 KB (421 words) - 22:51, 21 December 2015
Low Slope SBS
[[Section:G. Construction Details| Ba

757 bytes (95 words) - 18:52, 21 December 2015
WP Details:F1.7.3 (Wearing Course - Concrete Slab)
..., refer to the [[Division C: Accepted Materials|'''Accepted Materials''']] section of this ''Manual''.

4 KB (484 words) - 21:15, 7 September 2021
TPO Conventionally Insulated System (Typical)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (383 words) - 21:38, 27 June 2022
WP Details:F1.7.5 (Expansion Joint - Deck Level)
...d to accommodate specific horizontal building movements and compliant with Section 3.2, [[Grade-level Waterproofing Standard#WPEXPANSION|'''Expansion Joints'' ...'Metal Cap or Coping Flashing''']]: Must overlap exterior wall finish. See Section 16.3, [[Grade-level Waterproofing Standard#WPFASTENER| '''Attachment''']] f

4 KB (527 words) - 21:16, 7 September 2021
WP Details:F1.7.7 (Walls - Low Door Sill)
...stalled at door sill opening corners. For additional requirements refer to Section 7, [[Grade-level Waterproofing Standard#WPSTRIPPING|'''Perimeter Flashing: ...facture, compatible with waterproofing membrane system, and compliant with Section 8, [[Grade-level Waterproofing Standard#WPPROTECTION|'''Membrane Protection

4 KB (560 words) - 21:17, 7 September 2021
WP Details:F1.7.8 (Walls - Window Curb & Flashings)
...acturer, compatible with waterproofing membrane system, and compliant with Section 10, [[Grade-level Waterproofing Standard#WPDRAINAGE|'''Drainage''']].

4 KB (596 words) - 21:17, 7 September 2021
WP Details:F1.7.11 (Bi-Level Drain - Hard Surface: Low Pervious Wearing Course)
...acturer, compatible with waterproofing membrane system, and compliant with Section 14, [[Grade-level Waterproofing Standard#WPDRAINS|'''Penetrations and Drain

4 KB (467 words) - 21:21, 7 September 2021
WP Details:F1.7.12 (Deck Drain - Unit Masonry on Pedestal Supports)
...acturer, compatible with waterproofing membrane system, and compliant with Section 8, [[RoofStar Guarantee Standards for Waterproofing#WPPROTECTION|'''Membran

3 KB (413 words) - 21:22, 7 September 2021
Specifying a RoofStar Guarantee
===Section 4.1. Quality Assurance=== ===Section 4.2. Guarantee===

2 KB (304 words) - 16:39, 19 September 2023
SBS Protected Roof Assembly (typical)
...tion and wind uplift), ballast must be installed by the Contractor (see '''Section 12.1'''). This requirement is waived when a ''Vegetated Roof System'' (VRS

5 KB (661 words) - 17:37, 27 October 2023
Roof Maintenance
This section has been reprinted with the kind permission of: ...covered in detail elsewhere in this manual. Checklists and a building plan help in making a thorough survey. This manual is set up in the same order as the

75 KB (11,617 words) - 21:00, 3 September 2021
Glossary
:An unsaturated felt or paper used in certain applications to help prevent bitumen drippage (not to be confused with a saturated felt “l ...part of a roofing membrane which overlaps or covers any portion of another section of membrane which is then sealed to form a watertight connection.

76 KB (11,565 words) - 18:09, 26 January 2024
Accepted Materials - EPDM Membrane Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

5 KB (633 words) - 20:30, 26 July 2021
Flexible Membrane Properties
This section has been reprinted with the kind permission of:

11 KB (1,753 words) - 15:02, 4 May 2017
Accepted Materials - TPO Membrane Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

5 KB (614 words) - 20:30, 26 July 2021
Introduction
[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x"

1 KB (189 words) - 18:41, 4 January 2016
EPDM Introduction
...neric” application specifications and details are not possible. This section of the manual contains both an overview of the products, their composition, ...generally be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2).

3 KB (465 words) - 20:53, 29 September 2016
TPO/PVC Introduction
...neric” application specifications and details are not possible. This section of the manual contains both an overview of the products, their composition, ...generally be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2).

4 KB (470 words) - 20:21, 27 July 2016
Definition and Terms
[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x"

128 bytes (18 words) - 18:49, 4 January 2016
Other Flex Membrane Specifications
[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x"

128 bytes (18 words) - 18:53, 4 January 2016
Other Flexible Membranes - Guide Specifications
[[Section:G. Construction Details| ''Const

253 bytes (28 words) - 20:26, 27 July 2016
Asphalt Shingles Introduction
This section of the manual is concerned with those roof systems that are: ...itish Columbia but are not covered by the Built-Up Roofing section (Section 4) or Flexible Membrane Systems (Sections 5 & 6); and

3 KB (461 words) - 20:36, 27 July 2016
ASM Introduction
...ost common deck materials used with architectural metal roofing. (Refer to Section [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_ASM_

4 KB (582 words) - 21:35, 30 October 2017
Draft CD 17
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (584 words) - 15:27, 26 February 2024
Draft CD 21
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (599 words) - 22:20, 23 February 2024
PVC Introduction
...neric” application specifications and details are not possible. This section of the manual contains both an overview of the products, their composition, ...generally be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2).

4 KB (463 words) - 16:20, 20 February 2019
SBS 11.3.2.2-1 Cast Iron Drains
...found in the BC Building Code at Appendix P.7.4.10 and Section 7.4.10.11 (Section 7.4.10.10 for gutters)(current edition) in conjunction with the 15-minute r

3 KB (416 words) - 18:00, 27 October 2023
SBS Flanged Insert Drain
...found in the BC Building Code at Appendix P.7.4.10 and Section 7.4.10.11 (Section 7.4.10.10 for gutters) in conjunction with the 15-minute rainfall value fro

3 KB (334 words) - 18:01, 27 October 2023
SBS Parapet (Independent of Roof Structure)
...systems. Required on assemblies using gravel ballast filter mats. See '''Section 13.6 - Cap Flashings, Base Flashings and Reglets'''. ...pe fasteners or cladding screws evenly spaced between seams. See '''Section 13.3 - Attachment'''.

3 KB (374 words) - 17:46, 27 October 2023
EPDM Membrane Termination B
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (580 words) - 16:27, 26 February 2024
SBS Fire Separation Joint
...ailable insulation products in the [[Division C|'''Accepted Materials''']] section of this Manual.

3 KB (386 words) - 21:52, 16 September 2022
Accepted Materials - ASM Roof Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''Expand''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

5 KB (576 words) - 20:33, 26 July 2021
Securing the Roof Assembly
==Section 3.1. Design== ...ree.bcpublications.ca/civix/document/id/public/bcbc2018/bcbc_2018dcp2s22r2 Section 2.2., "Administration"].

55 KB (7,359 words) - 21:22, 3 October 2023
All Standards:MATERIALS
...able to RGC. A listing is published in the RCABC Roofing Practices Manual, Section ('''''Reference needed'''''). ...in the RCABC Roofing Practices Manual, Section C. See also below in this Section, D1.4.

1 KB (211 words) - 16:09, 6 January 2016
Section:F. Application: Waterproofing Plazas, Promenades and Terraces
#REDIRECT [[Section:F. Waterproofing Plazas, Promenades and Terraces]]

70 bytes (8 words) - 19:16, 6 January 2016
Cedar Shake & Shingle Bureau
...gles Roof Systems#CEDARMATERIALS | '''Cedar Shake & Shingle Materials''']] section of this Manual.

3 KB (358 words) - 15:36, 24 April 2018
Waterproofing Systems (Roofs): BUR Systems
...terials''']] in the [[Design Considerations|'''''Essential Elements''''']] section of this Manual for more about Bitumens and Built-Up Roofing Felts

1 KB (159 words) - 21:53, 7 September 2021
Genflex Roofing Systems LLC
[[Section:C. Accepted Materials| Back

2 KB (254 words) - 17:18, 6 June 2016
Grace Construction Products
[[Section:C. Accepted Materials| Back

2 KB (254 words) - 17:18, 6 June 2016
Main Page Div
[[:Section:A. About|'''A. About''']] [[:Section:B. Essential Elements|'''B. Essential Elements''']]

7 KB (990 words) - 20:54, 2 August 2016
EPS (Expanded Polystyrene Foam)
...properties decrease from Type 1 to Type 4. (For Type 2 and Type 4 see also section 6 above, Extruded Expanded Polystyrene). Note: Type 4 is usua

3 KB (422 words) - 17:14, 17 June 2016
Waterproofing Introduction
[[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

296 bytes (34 words) - 21:02, 29 September 2016
Waterproofing Definition and Terms
[[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

316 bytes (35 words) - 21:02, 29 September 2016
Grade-level Waterproofing Standard
<div class="panel-heading"><big>'''How to use the Guarantee Standards section'''</big></div> '''This section contains the Standards, Guiding Principles, Recommendations and reference m

117 KB (13,071 words) - 18:36, 5 April 2024
Accepted Materials - Grade-level Waterproofing
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' [[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

7 KB (968 words) - 20:34, 26 July 2021
Waterproofing Special Applications
[[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

294 bytes (32 words) - 21:04, 29 September 2016
Waterproofing Guide Specification
[[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

1,009 bytes (109 words) - 20:04, 9 November 2016
Shingled Roofing Systems: Cedar Shakes & Shingles
Contact Address: See Membership List in Section 1. Contact Address: See Membership List in Section 1.

9 KB (1,344 words) - 14:13, 27 July 2021
TPO Conventionally Insulated System (Alternate)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (439 words) - 21:37, 27 June 2022
Other Flexible Membrane Construction Details
'''NOTE''': This page is under development. Refer to the [[Section:G. Construction Details|'''SBS, EPDM or TPO/PVC Membrane Construction Detai [[Section:D. Application: Low Slope Roofs|</

696 bytes (92 words) - 01:13, 15 September 2016
Draft CD 14
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (561 words) - 15:51, 26 February 2024
Draft CD 23
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (596 words) - 22:32, 23 February 2024
Draft CD 13
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (858 words) - 16:09, 16 February 2024
Siplast SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1. ...required. Consult the [[Construction Details|'''Construction Details''']] section of this Manual.

22 KB (3,408 words) - 18:30, 9 November 2016
GAF SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

12 KB (1,817 words) - 19:27, 7 November 2016
Soprema SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

14 KB (2,024 words) - 18:30, 9 November 2016
Malarkey SBS Membrane Installation Guidelines
Contact Address: See Membership List Section 1

8 KB (1,192 words) - 19:52, 7 November 2016
IKO SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

11 KB (1,543 words) - 18:21, 9 November 2016
Tremco SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1

7 KB (942 words) - 20:12, 7 November 2016
IKO SBS Waterproofing Installation Guidelines
Contact Address: See Membership List in Section 1.

8 KB (1,205 words) - 18:26, 9 November 2016
Henry Company SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

12 KB (1,673 words) - 19:42, 7 November 2016
Hal Industries SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

13 KB (1,969 words) - 19:40, 7 November 2016
Firestone SBS Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

21 KB (3,147 words) - 19:39, 7 November 2016
HAL Industries BUR Installation Guidelines
Contact Address: See Membership List in Section 1.

19 KB (2,786 words) - 16:54, 4 November 2016
Tremco BUR Installation Guidelines
Contact Address: See Membership List in Section 1.

20 KB (2,976 words) - 16:55, 4 November 2016
Johns Manville BUR Installation Guidelines
Contact Address: See Membership List in Section 1.

7 KB (992 words) - 16:56, 4 November 2016
GAF BUR Installation Guidelines
Contact Address: See Membership List in Section 1.

25 KB (3,685 words) - 16:52, 4 November 2016
Garland BUR Installation Guidelines
Contact Address: See Membership List in Section 1. ...ch insulation stop. Place insulation stops as per RGC Guarantee Standards (Section 2,1,1)). On non-insulated systems, nail each ply directly into the deck at

22 KB (3,005 words) - 17:17, 4 November 2016
Tremco Hybrid EPDM Installation Guidelines
Contact Address: See Membership List in Section 1 Contact Address: See Membership List in Section 1

21 KB (3,244 words) - 22:15, 7 November 2016
Firestone EPDM Membrane Installation Guidelines
Contact Address: See Membership List in Section 1. ::*“T” Joints: Apply a section of Firestone QuickSeam Flashing or QuickSeam Joint Cover over the “T&

46 KB (7,081 words) - 22:47, 7 November 2016
Carlisle EPDM Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

30 KB (4,433 words) - 22:21, 7 November 2016
Johns Manville EPDM Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

20 KB (3,027 words) - 23:04, 7 November 2016
Carlisle TPO Membrane Installation Guidelines
ontact Address: See Membership List in Section 1. ...ted membrane into the coated substrate. Immediately brush down the bonded section to ensure full contact.

9 KB (1,324 words) - 17:09, 8 November 2016
Firestone TPO Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

24 KB (3,556 words) - 22:15, 13 November 2020
GAF TPO Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

12 KB (1,686 words) - 17:07, 8 November 2016
Johns Manville TPO Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

9 KB (1,238 words) - 17:03, 8 November 2016
Johns Manville PVC Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

30 KB (4,666 words) - 17:04, 8 November 2016
Sarnafil PVC Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

42 KB (6,360 words) - 18:54, 9 November 2016
Sarnafil PVC Waterproofing Installation Guidelines
Contact Address: See Membership List in Section 1. ;THERMOPLASTIC SHEET WATERPROOFING SECTION 071354

22 KB (3,157 words) - 18:55, 9 November 2016
GAF APP Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

36 KB (5,546 words) - 18:22, 8 November 2016
IKO APP Membrane Installation Guidelines
Contact Address: See Membership List in Section 1.

18 KB (2,577 words) - 20:02, 8 November 2016
Siplast SBS Waterproofing Installation Guidelines
Contact Address: See Membership List in Section 1.

10 KB (1,477 words) - 18:28, 9 November 2016
Soprema SBS Waterproofing Installation Guidelines
Contact Address: See Membership List in Section 1.

7 KB (1,060 words) - 18:29, 9 November 2016
Garland SBS Waterproofing Installation Guidelines
Contact Address: See Membership List in Section 1.

11 KB (1,769 words) - 18:24, 9 November 2016
Waterproofing Guide Specifications (2-Ply SBS Membrane Systems)
SECTION 07 13 52 ;1.1 SECTION INCLUDES:

23 KB (2,972 words) - 19:49, 9 November 2016
Waterproofing Guide Specifications (PVC Membrane Systems)
;1.1 SECTION INCLUDES ....06 - Construction Progress Schedule - Critical Path Method (CPM)] [___]] [Section [01 32 16.07 - Construction Progress Schedules - Bar (GANTT) Chart] [___]]

18 KB (2,262 words) - 19:50, 9 November 2016
Waterproofing Guide Specifications (Butyl Membrane Systems)
;1.1 SECTION INCLUDES :.1 Provide submittals in accordance with Section [01 33 00 - Submittal Procedures] [___].

19 KB (2,419 words) - 19:52, 9 November 2016
Waterproofing Guide Specifications (Hot-applied Rubberized Asphalt Waterproofing Systems)
Section ;1.1 SECTION INCLUDES

18 KB (2,332 words) - 19:53, 9 November 2016
Waterproofing Special Application
[[Section:F. Waterproofing Plazas, Promenades and Terraces|<i class="fa fa-chevron-ci

2 KB (212 words) - 15:19, 14 August 2017
Garland Hot Rubberized Asphalt Installation Guidelines
Contact Address: See Membership List in Section 1.

8 KB (1,226 words) - 22:34, 9 November 2016
Detec Systems Guide Specifications
Section THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST DESIGN PROFESSIONALS IN THE PREPARATION OF PROJ

12 KB (1,634 words) - 22:57, 9 November 2016
SMT Guide Specifications
Section THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST DESIGN PROFESSIONALS IN THE PREPARATION OF PROJ

12 KB (1,693 words) - 22:58, 9 November 2016
Cedar Shake & Shingle Systems Standard
Note: The B.C. Building Code Part 9 for Housing and Small Buildings, Section 9.19 Roof Spaces, 9.19.1.3 Clearances requires: Note: The B.C. Building Code Part 9 for Housing and Small Buildings, Section 9.19 Roof Spaces, 9.19.1.3 Clearances requires:

27 KB (4,173 words) - 20:44, 3 September 2021
Tile Systems Standard
| style="background-color: #ffffcc;" | This section of the RCABC '''''Roofing Practices Manual''''' is to provide general infor

13 KB (2,003 words) - 20:44, 3 September 2021
Accepted Materials - BUR Membrane Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

5 KB (673 words) - 20:32, 26 July 2021
BUR Application Guides and Notes
...the [http://rpm.rcabc.org/index.php?title=SBS_Roof_Systems '''SBS Membrane section'''], since some BUR systems utilize a hot-mopped/torch-applied base and cap This section contains precautions for applying modified bitumen roofing. The applicator

15 KB (2,413 words) - 19:01, 23 October 2017
Slate Systems Standard
| style="background-color: #ffffcc;" | This section of the RCABC '''''Roofing Practices Manual''''' is to provide general infor This section of the RCABC Roofing Practices Manual is to provide general i

12 KB (1,814 words) - 23:02, 20 October 2022
Accepted Materials - PVC Membrane Systems
| colspan="2" | <big>To view materials in any section listed below, click on the '''EXPAND''' ...bc.org/index.php?title=Materials_by_Product_Type '''Accepted Materials'''] section of this Manual, as their performance is not guaranteed by the '''''RoofStar

5 KB (611 words) - 20:30, 26 July 2021
Draft CD 18
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (602 words) - 15:37, 26 February 2024
Draft CD 20
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (577 words) - 22:16, 23 February 2024
Draft CD 16
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (582 words) - 15:27, 26 February 2024
Draft CD 22
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (596 words) - 22:28, 23 February 2024
Notes to Asphalt Shingle Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

27 KB (3,999 words) - 15:35, 14 November 2023
(Draft) Notes to EPDM Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The ...elatively uncommon for roofs with flexible membranes. They are designed to help control thermal expansion and contraction stresses in the roof ''system'' w

59 KB (8,538 words) - 18:07, 2 April 2024
Draft CD 15
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (584 words) - 15:38, 26 February 2024
Draft CD 2
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (577 words) - 15:01, 16 February 2024
Draft CD 3
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (600 words) - 15:02, 16 February 2024
Draft CD 1
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (837 words) - 15:01, 16 February 2024
Draft CD 4
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (596 words) - 15:30, 16 February 2024
Draft CD 5
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (598 words) - 15:24, 16 February 2024
Draft CD 6
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

5 KB (617 words) - 15:47, 16 February 2024
Draft CD 7
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (839 words) - 15:04, 16 February 2024
Draft CD 8
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (576 words) - 15:09, 16 February 2024
EPDM Membrane Termination D
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (599 words) - 16:28, 26 February 2024
EPDM Membrane Termination E
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (601 words) - 16:29, 26 February 2024
EPDM Membrane Termination F
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

5 KB (620 words) - 16:30, 26 February 2024
TPO Membrane Termination A
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (842 words) - 16:35, 26 February 2024
TPO Membrane Termination B
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (580 words) - 16:36, 26 February 2024
TPO Membrane Termination C
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (602 words) - 16:37, 26 February 2024
TPO Membrane Termination D
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (599 words) - 16:38, 26 February 2024
TPO Membrane Termination E
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (599 words) - 16:38, 26 February 2024
TPO Membrane Termination F
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

5 KB (617 words) - 16:39, 26 February 2024
PVC Membrane Termination A
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (842 words) - 16:41, 26 February 2024
PVC Membrane Termination B
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (579 words) - 16:42, 26 February 2024
PVC Membrane Termination C
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (601 words) - 16:42, 26 February 2024
PVC Membrane Termination D
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (600 words) - 16:43, 26 February 2024
PVC Membrane Termination E
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (601 words) - 16:44, 26 February 2024
PVC Membrane Termination F
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

5 KB (619 words) - 16:44, 26 February 2024
(Draft) Grade-level Waterproofing Standard
<div class="panel-heading"><big>'''How to use the Guarantee Standards section'''</big></div> '''This section contains the Standards, Guiding Principles, Recommendations and reference m

117 KB (13,068 words) - 18:35, 5 April 2024
Draft CD 9
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (598 words) - 15:29, 16 February 2024
Draft CD 10
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (597 words) - 15:31, 16 February 2024
Draft CD 11
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (598 words) - 15:24, 16 February 2024
Draft CD 12
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (616 words) - 15:26, 16 February 2024
Notes to ASM Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

32 KB (4,655 words) - 13:53, 9 April 2024
PVC Conventionally Insulated System (Typical)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (383 words) - 22:12, 27 June 2022
PVC Protected Roof Assembly (Typical)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (444 words) - 22:19, 27 June 2022
PVC Conventionally Insulated System (Alternate)
...sulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.

3 KB (439 words) - 22:16, 27 June 2022
Draft CD 19
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (839 words) - 22:13, 23 February 2024
Asphalt Shingles - Cylindrical Penetration (Flashing, Storm Collar)
;(2) [[Asphalt Shingle Systems Standard#Section 12.2. Materials|'''Penetration flashing''']]:Conforming to material require

3 KB (376 words) - 20:36, 2 May 2024
(Draft) Notes to TPO Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

57 KB (8,227 words) - 18:02, 2 April 2024
(Draft) Notes to PVC Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

57 KB (8,227 words) - 18:07, 2 April 2024
(Draft) Notes to ASM Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

31 KB (4,535 words) - 15:47, 27 October 2023
(Draft) Notes to Asphalt Shingle Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

27 KB (3,996 words) - 15:35, 14 November 2023
Scope of RPM and Standards
===Section 1.1. Roofing Practices Manual and Standards=== ===Section 1.2. Materials used for Guarantee===

6 KB (906 words) - 15:35, 24 August 2023
Guarantee
==={{hilite | Section 3.1. RoofStar Guarantee Program || 2020-July-3 }}=== ===Section 3.2. Coverage===

15 KB (2,129 words) - 19:29, 1 February 2024
(Draft) Notes to SBS Standard
...cold-rolled steel sections (panels) that are usually galvanized. In cross-section the panels are ribbed, with the ribs usually spaced at 150 mm (6") O.C. The :::1) Cables or raceways installed in accordance with this Section shall not be installed in locations concealed within a roof decking system,

61 KB (8,812 words) - 18:01, 2 April 2024
Draft CD 24
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (614 words) - 22:36, 23 February 2024
SBS Membrane Termination A
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (861 words) - 15:55, 26 February 2024
SBS Membrane Termination B
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (564 words) - 15:56, 26 February 2024
SBS Membrane Termination C
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (587 words) - 15:57, 26 February 2024
EPDM Membrane Termination A
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

6 KB (840 words) - 16:26, 26 February 2024
SBS Membrane Termination D
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (585 words) - 15:58, 26 February 2024
SBS Membrane Termination E
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (587 words) - 15:59, 26 February 2024
SBS Membrane Termination F
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (605 words) - 16:00, 26 February 2024
EPDM Membrane Termination C
:Installed in keeping with Section 7.3. Multiple layering illustrated; layers must be offset and staggered at ...e properties. Membrane must be installed according to the requirements in Section 9.3.

4 KB (603 words) - 16:27, 26 February 2024
Roof Membranes
...neric” application specifications and details are not possible. This section of the manual contains both an overview of the products, their composition, ...generally be defined as either a THERMOSET (Section 6.1) or THERMOPLASTIC (Section 6.2).

33 KB (4,674 words) - 16:01, 9 September 2021
Section: I General Information
:This Section link is not used. Click on the [[Main Page]] link to return to the Table o

100 bytes (19 words) - 18:23, 2 September 2021
Code and Roof Design
Back to Section 2.2. of Division C, we read the following in Article ''2.2.2.1. General Inf ...ion, information on the changes shall comply with the requirements of this Section for proposed work.

18 KB (2,705 words) - 14:44, 4 November 2021
ASM Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

260 KB (36,048 words) - 21:32, 5 April 2024
SBS Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

465 KB (62,116 words) - 21:20, 5 April 2024
EPDM Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

423 KB (57,312 words) - 21:21, 5 April 2024
TPO Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

420 KB (56,956 words) - 21:23, 5 April 2024
PVC Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

415 KB (56,426 words) - 21:31, 5 April 2024
Asphalt Shingle Systems Standard
==Section 1.1. Design== ==Section 1.2. Reserved==

235 KB (33,160 words) - 21:33, 5 April 2024
Hot Rubber Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

294 KB (41,687 words) - 21:32, 5 April 2024
(Draft) SBS Roof Systems Standard
...''''RoofStar 15-Year Guarantee''''' are listed in each relevant Part under Section 1. All '''''RoofStar 15-Year Guarantee''''' requirements must be read toge ==Section 1.1. Design==

466 KB (62,225 words) - 22:19, 5 April 2024