Accepted Materials - SBS Modified Bitumen Membrane Systems

Jump to: navigation, search

Accepted Materials - SBS Modified Bitumen Membrane Systems

Revision as of 15:28, 24 October 2017 by James Klassen (talk | contribs) (→‎Air & Vapour Control)
To view materials in any section listed below, click on the EXPAND button located at the right hand side of this page

1 Air and Vapour Control

The RCABC does not list air or vapour barriers in the Accepted Materials section of this Manual, as their performance is not guaranteed by the RoofStar Guarantee Program. For more about air and vapour barriers and specific requirements for the RoofStar Guarantee Program, select any of the Low Slope Membrane Roof Systems. This cross-reference is listed for information only.

2 Deck Overlay Board and Wall Sheathing

Deck overlays are materials installed over decks to render the surface suitable for waterproofing materials. Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program

* Use treated plywood over concrete deck surfaces
Manufacturer Product Name Product Type Thickness
mm (in.) 		Weight
(lb/square foot) 		Comp. Strength
(psi, nominal) 		Acceptable
Application
Plywood Plywood overlay 12.7 (1/2) min. Variable - All decks*
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 6.4 (1/4) 1.100 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 12.7 (1/2) 1.950 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck Roofboard Moisture-resistant gypsum core board 15.9 (5/8) 2.500 500-900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.150 900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 1.975 900 All decks
Georgia-Pacific Canada Ltd. DensDeck® Prime with EONIC Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.550 900 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.200 700-1000 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 2.000 700-1000 All decks
USG (CGC) SecureRock Securerock Glass-Mat Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.700 700-1000 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.570 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 9.5 (3/8) 1.960 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 2.760 1800 All decks
USG (CGC) SecureRock Securerock Gypsum Fibre Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 3.200 1800 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 6.4 (1/4) 1.200 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 12.7 (1/2) 1.700 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Coated Ultralight Glass Mat Roof Board* 15.9 (5/8) 2.200 700-1000 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 6.4 (1/4) 1.200 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 12.7 (1/2) 1.700 700-1000 All decks
USG (CGC) SecureRock Securerock Ultralight Glass Mat Roof Board Moisture-resistant gypsum core board 15.9 (5/8) 2.200 700-1000 All decks
* Indicates conditions of acceptance. See the product page for more information.

3 Insulation

Composite Board Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa/25.4 mm) Compressive Strength (psi/1 in. thick) Thermal Resistance (RSI/25.4 mm) Thermal Resistance (R/inch)
Posi-Slope Western MF (Protect Board Composite) ‒ ‒ ‒ ‒ ‒ ‒
Soprema Inc. Xpress Board HD ‒ 200 190 (at 25%) 28 (at 25%) 0.70 K/W 4
Soprema Inc. Xpress ISO ‒ ‒ 138 (Polyiso only) 20 (Polyiso only) 1.0 5.7
XPS (Extruded Expanded Polystyrene Foam)
XPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Dupont Specialty Products Division - Safety and Construction Deckmate (Type 2) ‒ ‒ 110 16 0.87 5
Dupont Specialty Products Division - Safety and Construction Deckmate Plus (Type 3) ‒ ‒ 140 20 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate (Type 4) ‒ ‒ 240 35 0.87 5
Dupont Specialty Products Division - Safety and Construction Roofmate CT (Type 4) ‒ ‒ 240* 35* 0.87 5
Owens Corning Canada Foamular C200 (Type 3) ‒ ‒ 140 20 0.88 5
Owens Corning Canada Foamular F350 (Type 4) ‒ ‒ 240 35 0.88 5
Owens Corning Canada Foamular 400 (Type 4) ‒ ‒ 275 40 0.88 5
Owens Corning Canada Foamular 600 (Type 4) ‒ ‒ 415 60 0.88 5
Owens Corning Canada Foamular 1000 (Type 4) ‒ ‒ 690 100 0.88 5
Owens Corning Canada Foamular 404 (Type 4) ‒ ‒ 276 40 0.88 5
Owens Corning Canada Foamular 604 (Type 4) ‒ ‒ 414 60 0.88 5
Owens Corning Canada Foamular 404RB (Type 4) ‒ ‒ 276 40 0.84 4.75
Owens Corning Canada Foamular 604RB (Type 4) ‒ ‒ 414 60 0.84 4.75
Soprema Inc. Sopra-XPS 35 ‒ ‒ 350 51 0.88 5
Soprema Inc. Sopra-XPS 40, 60, 100 ‒ ‒ 500, 600, 700 73, 87, 102 0.88 5
EPS (Expanded Polystyrene Foam)
EPS Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind Uplift Resistance) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm)
@24°C (74°F) 		Thermal
Resistance
(R/inch)
@24°C (74°F)
Airfoam Industries Ltd. Korolite 100 (Type 1, Flat) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Flat) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Flat) ‒ 172 25 0.74 4.27
Airfoam Industries Ltd. Korolite 100 (Type 1, Tapered) ‒ 70 10 0.65 3.75
Airfoam Industries Ltd. Korolite 160 (Type 2, Tapered) ‒ 110 16 0.7 4.04
Airfoam Industries Ltd. Korolite 250 (Type 3, Tapered) ‒ 172 25 0.74 4.27
Beaver Plasticts Ltd. Terrafoam (Type 1, Flat) ‒ 70 10 0.65 3.75
Beaver Plasticts Ltd. Terrafoam (Type 2, Flat) ‒ 110 16 0.7 4.04
Beaver Plasticts Ltd. Terrafoam (Type 3, Flat) ‒ 140 20.4 0.74 4.27
Beaver Plasticts Ltd. Terrafoam (Type 1, Tapered) ‒ 70 10 0.65 3.75
Beaver Plasticts Ltd. Terrafoam (Type 2, Tapered) ‒ 110 16 0.7 4.04
Beaver Plasticts Ltd. Terrafoam (Type 3, Tapered) ‒ 140 20.4 0.74 4.27
Plasti-Fab Plastispan Insulation (Type 1) ‒ 70 10 0.65 3.75
Plasti-Fab Plastispan HD Insulation (Type 2) ‒ 110 16 0.7 4.04
Plasti-Fab Plastispan 25 Insulation (Type 3) ‒ 140 20 0.74 4.27
Plasti-Fab Plastispan Sloped Insulation ‒ ‒ ‒ ‒ ‒
Polyisocyanurate Foam
"Polyiso" Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/m3) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
Atlas Roofing Corporation AC Foam III ‒ 32 138 20 1 5.7
Atlas Roofing Corporation AC Foam Supreme ‒ 32 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield HD Plus MARS PARS ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) Polyiso ‒ ‒ 138 20 1 5.7
Carlisle Syntec Systems Canada SecurShield RapidLock (RL) HD Polyiso ‒ ‒ 138 20 1 5.7
Elevate (fomerly Firestone) ISOGARD CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield CG ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Premier ‒ 32 138 20 1 5.7
Hunter Panels H-Shield Composite ‒ 32 138 20 1 5.7
IKO Industries Ltd. IKOTherm III ‒ ‒ 140 20 1 5.7
Johns Manville Corporation ENRGY 3 CGF Insulation ‒ ‒ 138 20 1 5.7
Polyglass USA, Inc. Polytherm G ‒ 32.04 138 20 1 5.7
Siplast, Inc. Paratherm CG ‒ ‒ 138 20 1 5.7
Soprema Inc. Sopra-Iso Plus ‒ 32 138 20 1 5.7
Fibreboard Roof Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Description Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
IKO Industries Ltd. Asphalt Fibreboard ‒ Impregnated/Coated ‒ ‒ ‒ ‒ ‒
MSL Petroleum Paraffin Natural ‒ Natural Fibreboard ‒ ‒ ‒ ‒ ‒
MSL Petroleum Paraffin HD ‒ High Density Fibreboard ‒ ‒ ‒ ‒ ‒
MSL Asphalt Coated (6 sides) ‒ Asphalt Coated - 6 sides (Natural Fibreboard) ‒ ‒ ‒ ‒ ‒
MSL Asphalt and Wax Impregnated Fibreboard ‒ Asphalt and Wax-impregnated ‒ ‒ ‒ ‒ ‒
MSL Asphalt and Wax Impregnated HD ‒ Asphalt and Wax-impregnated HD ‒ ‒ ‒ ‒ ‒
MSL Securpan ‒ Fire-resistant fibreboard ‒ ‒ ‒ ‒ ‒
MSL Securpan (asphalt coated) ‒ Asphalt-coated on 1 side / fire-resistant ‒ ‒ ‒ ‒ ‒
Perlitic Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Johns Manville Corporation Fesco Board ‒ ‒ ‒ ‒ 0.49 2.78
Mineral Fibre Roof Insulation
Mineral Fibre Insulation
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program. NOTE: materials linked to Tested Assembly tables may be displayed separately or located only in Tested Assembly reports.
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive
Strength
(kPa) 		Compressive
Strength
(psi) 		Thermal
Resistance
(RSI/25.4 mm) 		Thermal
Resistance
(R/inch)
ROCKWOOL TOPROCK® DD ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL TOPROCK® DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
ROCKWOOL MULTIFIX TM ‒ See TDS See TDS See TDS 0.68 3.8
Soprema Inc. Soprarock DD ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock DD PLUS ‒ See TDS See TDS See TDS 0.62 3.5
Soprema Inc. Soprarock MD ‒ See TDS See TDS See TDS See TDS See TDS
Soprema Inc. Soprarock MD Plus ‒ See TDS See TDS See TDS See TDS See TDS
Lightweight Insulating Concrete
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Density (kg/cu. m) Compressive Strength (kPa) Compressive Strength (psi) Thermal Resistance (RSI) Thermal Resistance (R/inch)
Siplast NVS Concrete ‒ 560 2070 300 N/A N/A
Siplast INSULCEL Concrete ‒ 480 1380 200 N/A N/A

4 Insulation Overlay Boards

Fibreboard
Template:Materials - Insulation Overlay (Fibreboard)
Proprietary Insulation Overlay Boards
Template:Materials - Insulation Overlay (Proprietary)

5 Membranes

Base Membranes
Template:Materials - SBS Base Membranes
Cap Membranes
Template:Materials - SBS Cap Membranes
Single-Ply Membranes
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name System Test Type (Wind) Nominal Membrane Thickness (mm) Approximate Weight (Kg/m2) Reinforcement Material Reinforcement Material Weight (g/m2) Application
GAF Ruberoid® HW Plus Granule FR Membrane ‒ ‒ ‒ ‒ ‒ ‒
GAF Ruberoid® Mop Granule Membrane ‒ ‒ ‒ ‒ ‒ ‒
GAF Ruberoid® HW Granule FR Membrane ‒ ‒ ‒ ‒ ‒ ‒
Siplast Parafor 50 LT ‒ ‒ ‒ ‒ ‒ ‒
Siplast Parafor 50 TG ‒ ‒ ‒ ‒ ‒ ‒

6 Liquid Membrane Flashing

Note to Reader
Liquid membrane flashing systems are manufactured from various bituminous and non-bituminous materials. These manufactured proprietary flashing systems are specifically designed for use to flash unusual roof penetration shapes or roof details that are difficult to flash with traditional membranes.
Liquid membrane flashings are available as one or two part component systems that require reinforcement scrims for strength. To ensure quality installation, manufacturers’ proprietary application instructions must be strictly followed.
2-Part Component Systems
For use with fabric reinforcement only (refer to product Technical Data Sheet for proprietary reinforcement materials). These systems may be used on or within 200 mm (8") of the water plane.
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product / System Name Description / Features Applicator Training Special Notes
Elevate (fomerly Firestone) Ultraflash Organo-silane compound paired with polyester scrim See Manufacturer Refer to Technical Data Sheet
Henry Company Canada Pumadeq Flex 31MV Catalyzed polyurethane methyl methacrylate used with N-Fleece fabric reinforcement See Manufacturer Refer to Technical Data Sheet
IKO Industries Ltd. Metatech Flashing Catalyzed polyurethane methyl methacrylate used with N-Fleece fabric reinforcement See Manufacturer Refer to Technical Data Sheet
Johns Manville Corp. PermaFlash MBR® Flashing Cement used with polyester reinforcement See Manufacturer Refer to Technical Data Sheet
Siplast, Inc. Parapro 123 Flashing Resin 2-part resin available in summer and winter grades See Manufacturer Refer to Technical Data Sheet
Soprema Inc. Alsan RS System 2-part liquid paired with Alsan RS Fleece See Manufacturer Refer to Technical Data Sheet
Single-component Systems
(NOTE: these flashing systems have limited application within the RoofStar Guarantee Program, and may be used on upstand angles, support junctions and joints that are typically more than 200 mm (8") above water plane. These materials may also be used as a coating on galvanized flashings and other strip-in flashings requiring a coating (see RoofStar Guarantee Standards for SBS-modified Bitumen Roof Assemblies, 12.4 Strip-in Flashings)
Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product / System Name Description / Features Applicator Training Special Notes
IKO Industries Ltd. MS Detail single-component flashing See Manufacturer See notations on Material page
Polyglass USA, Inc. Polyflash 1C single-component moisture-cured See Manufacturer To be used only with Polyglass membranes
Soprema Inc. Alsan Flashing Single component polyurethane/bitumen coating See Manufacturer See notations on Material page

7 Filter Mats & Ballast

Click on the heading above to find filter mat and ballast requirements when designing or constructing a Protected or Modified Protected Membrane Roof.

8 Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the waterproofing or water-shedding capabilities of the system.

Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers.

These membranes are not Accepted for use in the primary waterproofing system, but may be use as for an ancillary function - for example, as protective membranes (a 'sacrificial' cap membrane).

Click on a manufacturer's name to see the full list of their products accepted for use in the RoofStar Guarantee Program
Manufacturer Product Name Description Application Method Suitability
Polyglass USA, Inc. Polyfresko G SA APP membrane Self-adhering Walkways, accessory surfaces
Polyglass USA, Inc. Polyfresko G FR APP membrane (fire resistant) Heat-welding Walkways, accessory surfaces
Polyglass USA, Inc. Polyfresko G APP membrane Heat-welding, hot asphalt, cold processing Walkways, accessory surfaces
Polyglass USA, Inc. Polyflex G FR APP membrane (fire resistant) Heat-welding Walkways, accessory surfaces
Polyglass USA, Inc. Polyflex G HP APP membrane Heat-welding, hot asphalt, cold processing Walkways, accessory surfaces

Coatings are not a waterproofing product, but rather enhance solar reflectivity or other properties of a membrane. The inclusion of these materials, although acceptable under the RoofStar Guarantee Program, is not part of the Guarantee.

Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program
Manufacturer Product Name Description Application Applicator Training
Soprema Inc. R-Nova Plus polyurethane/acrylic-based waterproofing liquid membrane/coating See Product Details Consult Manufacturer
Soprema Inc. R-Nova Plus Mastic polyurethane/acrylic-based waterproofing liquid mastic See Product Details Consult Manufacturer
Soprema Inc. R-Nova Plus Matrix polyurethane/acrylic-based waterproofing liquid paste See Product Details Consult Manufacturer
Click on a manufacturer's name to see the full list of their products listed for use in the RoofStar Guarantee Program
Manufacturer Product Name Type Size
Soprema Inc. Soprajoint Plus 20 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 40 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 75 expansion joint for low-slope membrane systems ‒
Soprema Inc. Soprajoint Plus 125 expansion joint for low-slope membrane systems ‒


Home - SBS Modified Bitumen Roof Assemblies

Accepted Materials

SBS Modified Bitumen Application Guides and Notes

Retrieved from "http://rpm.rcabc.org/index.php?title=Accepted_Materials_-_SBS_Modified_Bitumen_Membrane_Systems&oldid=18146"