Manufacturers:Siplast, Inc.
Manufacturers:Siplast, Inc.
Division C - Accepted Materials
Siplast, Inc.
Associate Member (Manufacturer)
| Materials Listed by Category
|
|
| Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024). Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website. |
Waterproofing Roofs
Insulation
- Polyisocyanurate Foam
- Paratherm CG
- Lightweight Concrete
- NVS Concrete
- INSULCEL Concrete
Insulation Overlay Panels
- High-density Insulation Overlays
- Paratherm HD
- Paratherm W HD
Bitumen (BUR)
SBS Polymer-Modified Bituminous Membranes
(See the membrane tables in Division C)
- Base Sheets
- Irex 40
- Paradiene 20
- Paradiene 20 EG
- Paradiene 20 EG SA
- Paradiene 20 EG TG
- Paradiene 20 HT
- Paradiene 20 HT TG
- Paradiene 20 HV
- Paradiene 20 HV TG
- Paradiene 20 PR
- Paradiene 20 PR TG
- Paradiene 20 SA
- Paradiene 20 TG
- Paradiene 20 TS SA
- Paradiene 20 F
- Paradiene 20 HT SA
- Paradiene 20 HT TG F
- Paradiene 20 HT TS
- Paradiene 20 HT TS F
- Paradiene 20 HV TS
- Paradiene 20 HV TS F
- Paradiene 20 SA F
- Paradiene 20 TS SA F
- Paradiene 20 TS F
- Base Sheets (Acceptable as a substrate for Parapro PMMA or self-adhered cap membranes)
- Pro Base SA
- Pro Base TG
- Pro Base TS
- Pro Base TS SA
- Pro Base
- Interplies
- Paradiene 20 TS
Waterproofing Roofs
SBS Polymer-Modified Bituminous Membranes (Cont.)
- Cap Sheets
- Paradiene 30
- Paradiene 30 FR
- Paradiene 30 FR TG
- Paradiene 30 HT
- Paradiene 30 HT FR
- Paradiene 30 HT FR TG
- Paradiene 30 HT TG
- Paradiene 30 TG (Eco-Active)
- Paradiene 30 TG
- Paradiene 40 (awaiting TDS)
- Paradiene 40 FR
- Paradiene 40 FR BW
- Paradiene 40 FR TG
- Parafor 30
- Parafor 30 TG
- Parafor 30 TG (Eco-Active) (awaiting TDS)
- Paratech 180 Cap
- Paratech 180 Cap FR
- Paratech 180 Cap TG
- Paratech 180 Cap FR TG
- Paratech 250 Cap
- Paratech 250 Cap TG
- Paratech 250 Cap FR
- Paratech 250 Cap FR TG
- Paratech Glass Cap FR
- Paratech Glass Cap FR TG
Single-ply Membranes
PVC Membranes
(See the membrane tables in Division C)
Liquid Membrane Systems (Field Application)
Liquid Membrane Flashing Systems
Two-part Reinforced Liquid Membrane Flashing
Waterproofing at Grade
SBS-Modified Bituminous Membranes
(See the membrane tables in Division C)
- Base Sheets
- Teranap 431 (2m x 20m)
- Teranap (1m x 8m)
- Cap Sheets
- Teranap 431 (2m x 20m)
- Teranap (1m x 8m)
Liquid Membrane Systems (Field Application)
Liquid Membrane Flashing Systems
Two-part Reinforced Liquid Membrane Flashing
Water-shedding Roofs
Insulation Overlay Panels
- High-density Insulation Overlays
- Paratherm HD
- Paratherm W HD
Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)
- Self-adhered Materials
- Paradiene 20 EG SA
Underlayment/Eave Protection (ASM)
- Self-adhered Materials
- Paradiene 20 EG SA
Accessories
| An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the Waterproofing or Water-shedding system. An Accessory is not an Accepted Material and therefore the RoofStar Guarantee does not extend to cover any potential material or installation failure. Accessories are listed in the Roofing Practices Manual merely for reference to specifiers, designers and installers. |
© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.